okayy.. this is my 2ND attempt at adding android to my HTC HD 2 as i have already messed up my 1st one...
i tried adding the DFT_Android rom to my HTC HD 2 Leo (T-Mobile), i did the HSPL_PKG install (2.8.0.HSPL or something...), i flashed the MAGLDR 111 and got to the USB FLASHING of the ANDROID ROM and it was flashing the partition ok, then it got to the 2nd partition and stop RIGHT before it was done (around 90%) and it gave me a FAIL INSTALL :
[Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
.... now the phone restarts and ITS STUCK on the DFT dark forces team screen and it WONT BUDGE... can anybody help me out please ?...
Hello guys , how are you? I'm just misserable and in a mess. Got a new phone and something went terribly wrong while trying to flash it with the Android. I'm stuck in Magldr 1.13 and it does not want to connect to the usb. Tried TTY mode and my PC does not recognize the phone. This is what I got in the MAGLDR, DAF file .
Readme.txt for this release is missing.
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
When installing HSPL , my SPL was 2.08.0000. I selected the 2.08 HSPL. Then it updated my ROM to 2.0 from 2.10 . Radio is still at 2.08.50.
I'm the dum... that bricked his phone so please let me know if there is anything that I can do. Thanks a lot
Try goin into the standart bootloader (vol- and power)
If u get in there, u can flash a shipped WM6.5 rom again and everything is stock
Are you trying to flash a rom?
If so use USB Flasher in the MAGLDR menu
i had a problem when i tried flashing a rom through magldr USB Flasher.. computer wouldn't install it and i couldn't use it.. well.. then i tried USB Mass Storage option and after my comp installed the device i tried USB Flasher mode and VOILA! it worked!
try something like that, and upgrade that radio.. newer roms acquire newer radio to work properly..
you get that error when you dont run daf.exe as admin in vista or windows 7.
right click, go to properties, go to compatibility and choose run as admin.
yamaboy1 said:
Hello guys , how are you? I'm just misserable and in a mess. Got a new phone and something went terribly wrong while trying to flash it with the Android. I'm stuck in Magldr 1.13 and it does not want to connect to the usb. Tried TTY mode and my PC does not recognize the phone. This is what I got in the MAGLDR, DAF file .
Readme.txt for this release is missing.
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
When installing HSPL , my SPL was 2.08.0000. I selected the 2.08 HSPL. Then it updated my ROM to 2.0 from 2.10 . Radio is still at 2.08.50.
I'm the dum... that bricked his phone so please let me know if there is anything that I can do. Thanks a lot
Click to expand...
Click to collapse
Try using magldr from http://forum.xda-developers.com/showthread.php?t=1090783 here, i have fixed the problem on latest version
Hey all,
Firstly, I know there are many similar threads posted here, but none of them actually gave a solution to a problem I have.
What I did: tried to eventually put WP 7.8 using Pdaimatejam's ROM.
*My HD2 runned on WM 6.5 and was completely original
I followed all steps in chronological order:
-Installed HSPL 2.08.HSPL - Succeeded
-Installed MAGLDR - Says it succeeded
NOW, it rebooted itself, since then it always freezed at the White HTC LOGO screen.
By booting via the bootloader (Volume down+Powerbutton) I get the following information:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I still see Serial at the bottom. When Plugging in USB it shows that it's connected with USB.
Important:
I have tried to install MAGLDR again: Same result. It says it succeeded, but is stuck after booting.
I have NEVER seen the MAGLDR bootup (The black list)
I have NOT put an SD-card when doing this all (Maybe that's the problem)
I also have NOT done anything with the Radio, because I diidn't know exactly what it is and I didn't think it was necesserily.
Any help would be very very very appreciated.
- TSeven
You can't just skip steps and expect everything to work properly. Flash radio 2.15.50.14, then I think you should be fine. Also, how are you planning on running WP7 without an SD card? Buy one or if you have one (which you should) put it in the phone. Flashing HSPL, MAGLDR, the radio etc. won't interfere with your SD or SIM card.
sdcard is WP7 main memory... you must have SDcard during flashing process in phone...
read install tutorial from my signature
Nigeldg said:
You can't just skip steps and expect everything to work properly. Flash radio 2.15.50.14, then I think you should be fine. Also, how are you planning on running WP7 without an SD card? Buy one or if you have one (which you should) put it in the phone. Flashing HSPL, MAGLDR, the radio etc. won't interfere with your SD or SIM card.
Click to expand...
Click to collapse
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.
soedhier007 said:
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.
Click to expand...
Click to collapse
is not important when you flash radio... just flash it...
I think radio then MAGLDR. You don't need to reflash HSPL though.
Thanks all for helping me out, still have to search for the 2GB sd card... I'll tell you guys Monday if it worked.
Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.
Tseven007 said:
Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.
Click to expand...
Click to collapse
First you must go to Magldr to activate the last 24MB
>10 Services>4 UseLast24MB
If this doesn't help, you must use another SD-Card. WP doesnt like any type of card. I use a SanDisk Class 4 card whitch works fine. Search in the forums other persons experiences with SD-Cards. Changing the ROM won't help.
Tseven007 said:
Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.
Click to expand...
Click to collapse
also same error for me,,,,,used class 4 sd card but no use
this error dont have anything with SDcard.... you not read install instructions... read tutorial from my signature
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Click to expand...
Click to collapse
my buttons (call key etc) dont respond in magldr boot screen.
dxdy said:
this error dont have anything with SDcard.... you not read install instructions... read tutorial from my signature
Click to expand...
Click to collapse
Hi all, not too hopeful for a reply since this thread is OLD.
I just got an HTC HD2 from my brother..its used etc. anyway.. it was running fine on winmo 6.5.
I decided to checkout online for tips on mods n getting it to look and run like a newer device? I thought id go for android ICS.
So, followed the steps and got the required items first. HSPL, Radio CUU and the HD2 toolkit that includes the magldr 1.13.
the first two flashes for hspl and rom were okay, however after flashing magldr, once the fone boots up in magldr mode, i could scroll up and down using the volume buttons but i cant SELECT anything, hence.. i cant get to the USB flasher mode to complete my 'quest'.
Has anyone experienced this or know why this happens? I am currently unable to use the fone.
judheim said:
... however after flashing magldr, once the fone boots up in magldr mode, i could scroll up and down using the volume buttons but i cant SELECT anything, hence.. i cant get to the USB flasher mode to complete my 'quest'.
Has anyone experienced this or know why this happens? I am currently unable to use the fone.
Click to expand...
Click to collapse
use green button to execute selected option...
Tseven007 said:
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.
Click to expand...
Click to collapse
Thanks, it's worked for my HTC PB81100, it stuck at HTC boot logo and now it's fixed
nooop
Pal ... Maybe Your Phone has The Special pack That is Unable to use Magldr ...
I had the problem of White Screen after installing Magldr
I had the same problem of White Screen after installing Magldr. Turns out it was the radio so followed the instructions Here >>>> .addictivetips.com/mobile/install-2-15-50-14-radio-on-htc-hd2
<<<<
Once installed it rebooted into MAGLDR then i could install a ROM.
Love this site btw!
Helo all,
Before i begin, i would like to apologize my noob-ness to all the mods and seniors in the forum.
I have tried searching about this problem of mine, but has come up with various results, however, none ot the can solved mine.
My HTC HD2 has been installed with NexusHD2.ICS.CM9.HWA.V2.3 for the past few months now. Last nite after a batt drain, it shut down. And when i reboot, it stuck in that Android-cube-swirly thing.
These are my specs by the way:
HTC HD2 T8585, 512mb ROM
HSPL4
MAGLDR 113
ClockworkMod Recovery v1.3_250M
NexusHD2.ICS.CM9.HWA.V2.3
If've read somewhere that i could try a fresh boot of sorts. So i tried reinstalling everything, but i still couldnt get into the MAGLDR screen.
When using Recovery v1.3_250M, this error message came out
"An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)"
Hence, i cannot reinstalled Android ICS (im using NAND method).
I also read somewhere about running a TASK29 berofe doing a fresh boot?? but i could not find what that is..
Pleeeeeeeeaasseee heeelllppp . . .
Hello
I'd really apprecaite some advice on flashing my HD2 to win7.8 i seem to keep running into the same roadblock. I've read and watched many tutorials but i keep getting the same error.
Basically i wipe my device, load magldr, boot into magldr and go to option 10 then option 4 for the last 24 option. I then go to USB flasher and attempt to flash a rom which always seems to fail the flashing on the 4th partition around 3quaters of the way with the following error.
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I've tried:
Formatting SD card on my laptop
Formatting sd card via magldr service menu
Tried a different smaller sandisk SD card.
Tried no SD card
Trying another win 7.8 ROM
installing hpsl4 and a custom RUU (not sure what they do but still got to the same stage)
Is anyone able to help me get this installed at all i'd be eternally grateful! Perhaps help me decipher what this error message alluds to?
Thank you for any assistance!
Just tried repartitioning in NAND to 300mb/45mb and instead of getting a red message when magldr first boots of "sd kernal failure" i get
nand kernal open failure could this be linked possibly?
Thanks again
Ok i'm about ready to give up if there are any experts around that could spare me 30 minutes of their time i'd glady reimmburse them for their time via paypal! Just need a little bit of troubleshooting help and confirm that the process i am taking is the correct one, i'm bound to be doing somthing stupid....
Managed to Flash win6.5 and also andriod Jellybean and Kitkit on the device but never win7.8 always get that error in the first post! :-[ insane!
Never disappoint there's always Somebody to help you ...
Tapley said:
Hello
I'd really apprecaite some advice on flashing my HD2 to win7.8 i seem to keep running into the same roadblock. I've read and watched many tutorials but i keep getting the same error.
Basically i wipe my device, load magldr, boot into magldr and go to option 10 then option 4 for the last 24 option. I then go to USB flasher and attempt to flash a rom which always seems to fail the flashing on the 4th partition around 3quaters of the way with the following error.
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I've tried:
Formatting SD card on my laptop
Formatting sd card via magldr service menu
Tried a different smaller sandisk SD card.
Tried no SD card
Trying another win 7.8 ROM
installing hpsl4 and a custom RUU (not sure what they do but still got to the same stage)
Is anyone able to help me get this installed at all i'd be eternally grateful! Perhaps help me decipher what this error message alluds to?
Thank you for any assistance!
Click to expand...
Click to collapse
My Dear friend ... First I'm sorry of seeing your thread late But now I'm here to help :laugh: ... as I read , you have problem with WPH installing ? ... so I'll give you some notes maybe you had left one of them ...
1- you should have HSPL 2.08 so if you don't have , Just install 2.08
2- you should do a Task29
3- install MAGLDR 1.13
4-enable "last 24 NAND" option in "services" menu of MAGLDR
5- format your SDcard
6- put it in the shut downed phone
7- install the WPH ROM but some times it gives errors at the beginning of the installation if you had that , it means the driver isn't installed so that you should install using Win XP but if the problem is that the process gives error in the middle / end of installation , it is usual and you have to install again and again to make it installed correctly ...
8- enjoy ( Due to being very hard , many people can't do this part so if you couldn't , just tell me to give you the Guide :laugh: )
NOTE : I tested that HD2O ROMs and usually have such problems so I recommend you to try PDAimatejam WPH 7.8 ROM , it is better and also all working ...
also you can Multi-Boot having both WPH and Android at the same time and it's the Best ( because WPH is really nice but has Battery drain and Android is good in battery and also nice :laugh: ) if were interested in that you can try this ... If had any Questions , I'll be Glad to answer ... Good luck
With Best Wishes
Hitman1376
May you please tell me how to re-partition in nand ?