Database Users

Nand corrupted?

I have major problem with my nand memory.
Few days ago my hd2 hanged while I was doing some backup via Titanium Backup and since then I have a problem with my device.
Generally nand android builds are not working (boot animation stuck), some of them actually do work but with problems (f.e FC's on everything or do not recognise my SD card).
When I'm trying to flash WP7 usually an error occurs: (partition 4)
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
Click to expand...
Click to collapse
I wrote usually becouse actually I have been able to flash it few times (3 or 4 on 20 attempts) but then windows stuck on boot logo or device hanged when I was trying add new contact.
I did Task 29, reflashed Radio and MAGLDR 1.13. Problem still persist...
Please anyone help!

Ziaren said:
I have major problem with my nand memory.
Few days ago my hd2 hanged while I was doing some backup via Titanium Backup and since then I have a problem with my device.
Generally nand android builds are not working (boot animation stuck), some of them actually do work but with problems (f.e FC's on everything or do not recognise my SD card).
When I'm trying to flash WP7 usually an error occurs: (partition 4)
I wrote usually becouse actually I have been able to flash it few times (3 or 4 on 20 attempts) but then windows stuck on boot logo or device hanged when I was trying add new contact.
I did Task 29, reflashed Radio and MAGLDR 1.13. Problem still persist...
Please anyone help!
Click to expand...
Click to collapse
Bro, did u got any anwser ??
please help, i have the same issue

Here is what I suggest you do : -
Flash a STOCK Winmo 6.5 ROM. Once that's done and you have Winmo 6.5 working, you'll atleast have your phone back up. Then I would suggest that you pick a LITE ROM to start with and see how that works for you. If it works, then move to your preferred ROM. Make sure that you're following instructions on how to flash back and forth to the letter.
Your device powers on. That's something you should be happy about.

im no developer but here is my solution
In my experience with this problem and its solution:
First remove the battery, and remove the SD card...
Second place the battery on the phone and reset it with the volume up key...
then take off battery and place the SD card back again, then place the battery...
restart the phone on plugged to a computer... (i do this on an WIN xp or WIN 7 machine).... so far it has crashed 3 times/same errors in the boot and this has worked.... i guess still some bugs need to be fixed...
(DONT KILL ME IF IT DOESNT HELP..IM NO EXPERT BUT ITS WORKED FOR ME..)

Try pulling your sim card, sd card & rebooting. If that doesnt work, try to flash an official rom from SD. (LEOIMG.nbh on root of SD, then boot with both volume buttons held) Upon 1st boot remove sim & sd. This should work, I had a simular problem and this fixed it. Android would not boot all the way, recovery wouldn't flash & WM gave me partition errors. I still had some issues in WM6.5 & could not flash the most recent EnergyROM with the newest HSPL. I eneded up calling warranty on mine. Hopefully the SD flash method will work for you.

KillaHurtz said:
Try pulling your sim card, sd card & rebooting. If that doesnt work, try to flash an official rom from SD. (LEOIMG.nbh on root of SD, then boot with both volume buttons held) Upon 1st boot remove sim & sd. This should work, I had a simular problem and this fixed it. Android would not boot all the way, recovery wouldn't flash & WM gave me partition errors. I still had some issues in WM6.5 & could not flash the most recent EnergyROM with the newest HSPL. I eneded up calling warranty on mine. Hopefully the SD flash method will work for you.
Click to expand...
Click to collapse
They only need to hold the volume down button to get the bootloader to come up not both volume buttons.

Radio and Rom flashing problem

Before I get started, I've flashed 4 different roms onto my phone before along with flashing the radio and installing Magldr, so I can't quite figure out what I'm doing wrong this time around
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Alright, I've set my phone into the bootloader, got an active connection and ran the CustomRUU.exe for both radio version 2.15 and 2.14.50 and for some reason, when completed it doesn't seem to have updated my radio. The program finishes and completes with no errors, but when I go to check in the tricolor bootloader, it's still version 2.08?
My ultimate goal is to get this ROM installed http://forum.xda-developers.com/showthread.php?t=917590 CleanDROID v2.51 - Froyo+CM
Now it says to update my radio to at least 2.12 but I don't know why it's not updating? And because of this, I cannot seem to flash the rom. When flashing the ROM, i am approached with this error:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
I have no idea what's going on or what I should do. I don't exactly see what I'm doing wrong or what steps are missing. I've never had so much of a hassle with rom and radio flashing before, it's aggravating me and I must figure it out lol!
Thanks in advance for all the help

efeguwewe said:
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Click to expand...
Click to collapse
Firstly despite being on d right path, u've got ur info slightly wrong.
"SPL-2.08.HSPL 8G XE CotullaHSPL" is ur installed HSPL & NOT ur radio version...Assuming u were still running WInMo, u would have noticed d change in radios u flashed at the bottom of the TMobile boot-up screen...Rest assured there r no major problems here cuz it appears u've already installed d radio...
***You've Performed HSPL and installed MAGLDR 1.13....so Good.
***You also performed a CWM install but the ROM thread u posted is not a CWM build....Meaning it's a DFT build and does't need CWM installed.
Nw here's what u'll do.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
P.S. Flashing a dft build will remove ur cwm installation...its a known fact dat both cannot co-exist.

I installed CWm because I was planning on flashing this ROM: http://forum.xda-developers.com/showthread.php?t=933951
But I gave up because I kept on getting the following error as well:
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
Same numbers and text
How can I check what radio I've flashed? Also, I don't think i have WinMo installed anymore as my phone just boots straight to MAGLDR after failing to load a android nand (but how can it when none is installed lol).
Since I've gone through the CustomRUU.exe for both 2.14 and 2.15, do I already have the radio flashed? Nothing went wrong and the process was completed
I've already done everything you posted before my original post, I just on getting those .RSPL errors.

>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
Click to expand...
Click to collapse
Tried it your exact way and I still get the .RSPL error

anybody have any idea what I should do?

efeguwewe said:
anybody have any idea what I should do?
Click to expand...
Click to collapse
Hmmm...Try this then.
Perform a Task29.
Flash a 2.15.50.14 radio.
Install MAGLDR 1.13.
Install CWM...(If needed & Paying attention to which particular clockwork partitioning system will work for you desired build).
Re-download the android build..(cuz i think some files might ave messed up while downloading).
Find an alternative means (e.g. thru sd card readers / thru CWM's mount storage system) to transfer the zipped build to ur memory card...Avoid using MAGLDR's inbuilt usb mass storage utility as its been reported 2 have a few issues during transfers.
If u also have a TMobile HD2, u might be interested in d build i'm currently running..It supports CWM n flashing it and or updates ave never given me issues.

Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help

nizaamh said:
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
Click to expand...
Click to collapse
Do you still have 2.08.hspl installed? Go back to bootloader and check it.

Android does not want to install!

Hello, please help me!! I wanted to install android on my new HTC HD2.
What I did:
Installed hardslp 2.08
Radio 2.15.50.14
MAGLDR 1.13
after installed magldr it sent me to it's menu. I select USB flasher and then go to my Android Rom unrared folder, i run DAF file. Then it starts to isntall something(1-3) seconds. says everything is done and thren reboot system and says "nand kernel open failed" and sends me back to menu.
i tried many times and with another Android but nothing helped! Tried to install Clockwork mode, same problem. Then tried to isntall 29 but this program did not want to install saying that it couldnt connect with HD2. I thought it is something wrong with my computer. I borrowed my friend's laptop and tried to install Android from his. Installing process took a little bit more time but the same problem: It congratulates me that everything is done then reboots, then kernel error appears for 1 sec and sends me back to main menu.
Then I deleted Sync program(windws phone something..) and tried new ROM. Now DAF program says me next:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Please help me !!

Hi,
Which ROM are you trying to install?
Which operating system have you got on your pc/laptop?

Are you right clicking on the DAF and selecting run as administrator?
Also when you go to USB Flasher and connect your HD2 to your computer are you giving a minute to establish a connection?

Give it a minute to establish connection, and try another Rom. Maybe your HD2 is 512 (EU), and you are trying to install ROM for 1024 HD2 (Tmobile US).
Did you read, maybe it is clockwork rom, not magldr?
Here is the link for MAGLDR flashing rom, stock Desire
http://forum.xda-developers.com/showthread.php?t=893620
it does not support ext partitions on sd card. But you can try another roms. And if you dont know how to flash it via Clockwork, here is the link
http://forum.xda-developers.com/showthread.php?t=1044830
p.s. Better ROMs are that that you flash via clockwork. Study that, it is easy.
Thanks to guys who wrote that tutorials

And here are all ROMs for HD2
http://forum.xda-developers.com/showthread.php?t=1044830

[Q] Im stuck. White screen

Ok. I have a HTC HD2 t-mobile. Someone gave it to me to see if I can fix it. So I have NO clue how it got to the point it is at now. All I know is that you power on and its a white screen. No HTC logo. Just white.
Enter boot loader: Red/Green/Blue/Black/White.... Its says:
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
SERIAL
Thats it. It doesnt connect to the computer.
What can I do? I tried:
CLEAN INSTALL
It’s a pretty long process, however, it takes a shorter time than the Installation of NAND Android. It takes me about 15minutes. It should take you about half an hour but no more than half an hour.
HSPL3, -2.08.HSPL.
[Head to my guide on How to install HSPL3, if you haven't install HSPL3 yet.]
Radio Version that supports 576 RAM(Radio2.15.50.14).
[Head to my guide on How to install radio , if you haven't install a suitable radio version yet.]
Wipe phone memory completely.
Install DFT MAGLDR.
Install ClockworkMod Recovery.
Create EXT3 Partition with ClockworkMod Recovery. (This step will wipe everything on our SD Card.)
Transfer ROM(zip file) to SD Card with ClockworkMod Recovery.
Install ROM from SD Card with ClockworkMod Recovery.
Details will be provided for each of the 6 steps.
But the phone and computer cant communicate. I have tried a hard reset. So thats where I am at now.

temp removed.

Ok. So I tried to flash the stock ROM from the SD card. It didnt complete. It says that it failed. It says at the top
00018003
LEOIMG.nbh - FAIL

Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)

When I try to install HSPL3 I get this error
CRITICAL ERROR
FLOW: 00000006
Error code: 00000014
Description Unknown

I can not get HSLP on my phone. I have tried versions 2,3 and 4... Is the phone done???

So I know I am a pain. But I have searched and read just about everything I can. I have tried to flash the stock ROM, I get an error of Radio Fail. I can not flash any other ROMS because I can not install HSLP.... I can connect via USB. But Windows Mobile Device center does not acknowledge the phone. I have ran the Task29... well tried... it says image is corrupted. I have even stuck the dang thing in the freezer like I have seen in random posts. Nothing but a really cold phone.
When I try and install HSPL3 I get an option to choose 2.08.HSPL or 2.08.0000 I have tried both. I get the critical error... Error code 16 description unknown.
I have tried following every set of directions I can locate in xda... Nothing has worked at all.

McSpammer5 said:
temp removed.
Click to expand...
Click to collapse
???What does that mean???

Have you tried reflashing window mobile???
Sent from my LG-P999 using xda premium

Yes I tried to reflash several times. I went and bought a new SD card. Solved it. Got windows working properly... Now to move on to installing Android

yesiamanoob said:
Yes I tried to reflash several times. I went and bought a new SD card. Solved it. Got windows working properly... Now to move on to installing Android
Click to expand...
Click to collapse
Great...
Sent from my LG-P999 using xda premium

Hi to the experts!
I have a very similar problem, maybe "almost" identical...
My HD2 (Australian Telstra, stock in almost every way), and it has been reliable for 2 years from new.
Then last Saturday night it started "failing to load HTC Sense", but all the WinMo 6.5 stuff was still fine. This lasted for 2 days and I thought it was stable like this so I would have time to look for a new phone, but last night I turned it off and on again, and all I have is the white screen. Mine has the green htc on it, but the only way to make it go away is to take out the battery.
I tried the volume down / power ON and I get the RGB+W screen, and when I plugged it in via USB to my new laptop it loaded drivers and initiated Windows mobile device center - but it won't recognise that there is a device there.
Now my very strong desire is to somehow boot it to allow recovery of my contacts directory - I have just started a new job and have probably 40 or so new people in there since my last backup.
What are my options? Is there anyway to boot from SD card without erasing the whole of system memory??
Failing that, how do I flash back to stock?
thanks (in hope)
..Neil

Stock WM
Try installing stock WM 6.5. There are many links available for the same, google it.
Do this without the memory card.
Enter Bootloader by pressing volume down and power on button together.
Then run the WM ROM file on your computer. You must see the progress bar on your phone. Let it settle down.
Hope that helps..!!

[Q] Really need some help flashing to Win7.8 :-[

Hello
I'd really apprecaite some advice on flashing my HD2 to win7.8 i seem to keep running into the same roadblock. I've read and watched many tutorials but i keep getting the same error.
Basically i wipe my device, load magldr, boot into magldr and go to option 10 then option 4 for the last 24 option. I then go to USB flasher and attempt to flash a rom which always seems to fail the flashing on the 4th partition around 3quaters of the way with the following error.
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I've tried:
Formatting SD card on my laptop
Formatting sd card via magldr service menu
Tried a different smaller sandisk SD card.
Tried no SD card
Trying another win 7.8 ROM
installing hpsl4 and a custom RUU (not sure what they do but still got to the same stage)
Is anyone able to help me get this installed at all i'd be eternally grateful! Perhaps help me decipher what this error message alluds to?
Thank you for any assistance!

Just tried repartitioning in NAND to 300mb/45mb and instead of getting a red message when magldr first boots of "sd kernal failure" i get
nand kernal open failure could this be linked possibly?
Thanks again

Ok i'm about ready to give up if there are any experts around that could spare me 30 minutes of their time i'd glady reimmburse them for their time via paypal! Just need a little bit of troubleshooting help and confirm that the process i am taking is the correct one, i'm bound to be doing somthing stupid....

Managed to Flash win6.5 and also andriod Jellybean and Kitkit on the device but never win7.8 always get that error in the first post! :-[ insane!

Never disappoint there's always Somebody to help you ...
Tapley said:
Hello
I'd really apprecaite some advice on flashing my HD2 to win7.8 i seem to keep running into the same roadblock. I've read and watched many tutorials but i keep getting the same error.
Basically i wipe my device, load magldr, boot into magldr and go to option 10 then option 4 for the last 24 option. I then go to USB flasher and attempt to flash a rom which always seems to fail the flashing on the 4th partition around 3quaters of the way with the following error.
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I've tried:
Formatting SD card on my laptop
Formatting sd card via magldr service menu
Tried a different smaller sandisk SD card.
Tried no SD card
Trying another win 7.8 ROM
installing hpsl4 and a custom RUU (not sure what they do but still got to the same stage)
Is anyone able to help me get this installed at all i'd be eternally grateful! Perhaps help me decipher what this error message alluds to?
Thank you for any assistance!
Click to expand...
Click to collapse
My Dear friend ... First I'm sorry of seeing your thread late But now I'm here to help :laugh: ... as I read , you have problem with WPH installing ? ... so I'll give you some notes maybe you had left one of them ...
1- you should have HSPL 2.08 so if you don't have , Just install 2.08
2- you should do a Task29
3- install MAGLDR 1.13
4-enable "last 24 NAND" option in "services" menu of MAGLDR
5- format your SDcard
6- put it in the shut downed phone
7- install the WPH ROM but some times it gives errors at the beginning of the installation if you had that , it means the driver isn't installed so that you should install using Win XP but if the problem is that the process gives error in the middle / end of installation , it is usual and you have to install again and again to make it installed correctly ...
8- enjoy ( Due to being very hard , many people can't do this part so if you couldn't , just tell me to give you the Guide :laugh: )
NOTE : I tested that HD2O ROMs and usually have such problems so I recommend you to try PDAimatejam WPH 7.8 ROM , it is better and also all working ...
also you can Multi-Boot having both WPH and Android at the same time and it's the Best ( because WPH is really nice but has Battery drain and Android is good in battery and also nice :laugh: ) if were interested in that you can try this ... If had any Questions , I'll be Glad to answer ... Good luck
With Best Wishes
Hitman1376​

May you please tell me how to re-partition in nand ?