Hey guys,
I have a friend that has an HTC HD2 with an android rom on it:
SPL-1.42.HSPL XE 0x05
CotullaHSPL 0x30
It was working fine untill today when during a call it locked up and rebooted. However after the reboot it hangs on the white screen with the HTC logo.
We managed to get it to work again by removing the card, rebooting, then reinserting the card and booting after about 3mins the winmo booted. but when you try to boot into android it locks up again and just starts buzzing.
Anyone have any idea what's wrong and how to solve it?
Press volume (-) button and Power button to go to bootloader mode and you can flash 2.08hspl. Then flash MagldR 1.13 and install android again.
Or try to reset button on the back by remove battery cover you will see yellow button.
Thanks I'll give it a try and let you know how it goes.
Related
Hi everyone. I have a HD2 Tmobile branded. It was working fine until yesterday i turn the phone off and then turn it back on. It wouldnt full booted. It just stuck at the pink (or red) Tmobile logo screen. Its the first screen that appear when u boot the phone up. I tried to connect it with a usb cable to my laptop but nothing happen at all so i can't reflash the ROM. Has anyone able to fix this before? Is there any other way i should try. Thanks
bump. Still looking for help please
Go into Bootloader Mode: While phone is Off, hold Volume Down button then tap the Power button.
Tell us what it says.
i have th same problem its stuck on pink tmobile
went to bootloader n says
PB81120 hx-b3
SPl-2.10.000 8G XE
Micro(LED) 0x05
MIcro(Touch) 0x40
also shows in the bottom white partt serial plzz some one help
mostwanted512 said:
i have th same problem its stuck on pink tmobile
went to bootloader n says
PB81120 hx-b3
SPl-2.10.000 8G XE
Micro(LED) 0x05
MIcro(Touch) 0x40
also shows in the bottom white partt serial plzz some one help
Click to expand...
Click to collapse
Ok your chooses here are:
A: Do a hard reset of your HD2 by holding both the volume up and down buttons down while powering on the HD2 and then following the on screen instructions.
B: Put your HD2 into bootloader and connect it to your computer via USB cable and wait for the Serial to change to USB. Then flash either your stock ROM, a custom Windows Mobile ROM of your choose, MAGLDR if you want to run Android or WP7, or cLK if you want to run Android.
Hi,
I've tried to install Android on my HD2, and I guess something has bone wrong.
I've installed the HSPL 3 package, that was ok.
Then I've moved to MAGLDR installation, it was ok until the reboot, after seeing 100% on the installation process, it boot and then get stucked on the starting screen, where you can read HTC with their logo.
I've tried to perform a hard reset. Seems ok, then I press Vol Up. First, the restore time is really short (less than a second), then I press Vol Up again to boot, and I get back to HTC Starting screen...
Do you have any idea about what I'm supposed to do?
Thanks in advance for your help.
Edit :
And when I press Vol Down before power on, I got the 4 color screen with :
On the red box PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the green box Nothing
On the Blue box Nothing
On the white box Serial
Benj430061 said:
Hi,
I've tried to install Android on my HD2, and I guess something has bone wrong.
I've installed the HSPL 3 package, that was ok.
Then I've moved to MAGLDR installation, it was ok until the reboot, after seeing 100% on the installation process, it boot and then get stucked on the starting screen, where you can read HTC with their logo.
I've tried to perform a hard reset. Seems ok, then I press Vol Up. First, the restore time is really short (less than a second), then I press Vol Up again to boot, and I get back to HTC Starting screen...
Do you have any idea about what I'm supposed to do?
Thanks in advance for your help.
Edit :
And when I press Vol Down before power on, I got the 4 color screen with :
On the red box PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the green box Nothing
On the Blue box Nothing
On the white box Serial
Click to expand...
Click to collapse
Well, pardon me for saying this but you should have searched the forum and google before. So many people have seen this problem before. After hard reset, you don't have anything left on the device so just re-install.
Should work.
Thanks a lot for your reply I feel at least release, my Leo isn't dead
I did actually spent some time over google and this forum, but haven't identified any problems siilar than mine... Sorry about that.
Now you tell me that I'm supposed to reinstall, fine but... how? I know how to when you can connect the mobile to the computer with Active Sync, but without... no idea.
Could you please gie me a clue?
Read this thread carefully.
All of the steps you need are in there.
First you will need to flash a compatible Radio if you haven't done this already.
Then you need to flash the Android ROM you want to use.
sorry for my bad english
ihave hd2 t mobile
after ubdate my mobile from android nand room to win mobile 6.5
i made a task 29
ubdate to win mobile 6.5 by mu computer
the ubdate give me 100% and back to boot loder
i try hspl and it work 100% and back to boot loder
i try ubdate by sd card and the update give me sucsses and compleat and back to bootloder
i try many rooms for t mobile
when i use task 29 or hspl or any ubdate it seems to be done but after that
my hd2 back to boot loder .
iam sorry for my bad english ..........but blz i need some help ..
some help plz
so your handset bootes into the tri colour boot loader even if you dont hold down the volume key?
yes my handset bootes into the tri colour boot loader even if i dont hold down the volume key
any help with my problem
basemhanafy said:
any help with my problem
Click to expand...
Click to collapse
Yeah it sounds like your volume key is broken you will need to get it fixed.
volume key is not broken its from the task 29 update
Not really understood your problem. It is likely you have run Task 29 (which formats your phone memory), and never install any new ROM (neither WinMo 6 nor Android)?
i update my phone from winmo 6,5 to android nand after 5monthes
when i try to back to winmo 6.5 now
i use task 29 to format my phone ......after that when i press the power my phone go to boot loder ...i try to flash with winmo 6.5 using my pc and after done ....my phone back to boot loder......i try flash winmo by sd card and give me sucsses on the screen but when i power my phone he boot to boot loder ......i try to flash mglder 113 by my pc and it done sucssesful ....and when i power my phone it go to bootloder...
when the phone is off and i connect the computer cable it power to boot loder.....i dont press the power
if i insert the sd card with leoimg and power the phone it go to boot loder and start flash the room and give me compleet and sucsses...
but when i power the hd2 it go to bootloder agin and agin and agin....
plz help
Take the windows rom and rename it to "leoimg.nbh" then put it on root of your sd card. When you next go into bootloader it should flash your phone.
As previously said, it sounds as though your Volume Down button is faulty.
You may not be pressing the Volume Down button but it may be making contact and when you press the Power Button it will send the phone into BootLoader Mode.
when i press volume up and vol dowe together and press power the phone go to format screen
but when i press volum up it go to boot loder
if my volum down is prokin ...my phone must go to format screen..
befor i use the task 29 my volume key is working good
Remove the SD Card.
Put it into Bootloader Mode -what does it say on the screen?
Does it fully boot up without SD Card?
when i remove sd card the hd2 boot into boot loder
Put it into Bootloader Mode -what does it say on the screen?
my problem is.. the hd2 is boot to bootloder every time i press the power
and when i make update via pc or sd card the update is sucssesful...
..........................................
my phone Appears to be sound except that he boot to boot loder every time
Be sure that the vol dowen is sound.
basemhanafy said:
my problem is.. the hd2 is boot to bootloder every time i press the power
and when i make update via pc or sd card the update is sucssesful...
..........................................
my phone Appears to be sound except that he boot to boot loder every time
Be sure that the vol dowen is sound.
Click to expand...
Click to collapse
Dude, If you insist on ignoring simple questions or ignoring them how do you expect anybody to try and help you?
I apologize for the inappropriate response...........................
so sorry for my bad english
.........................................................................................................
the screen is like this
................................
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
Cotullahspl 0x50
.................................
basemhanafy said:
I apologize for the inappropriate response...........................
so sorry for my bad english
.........................................................................................................
the screen is like this
................................
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
Cotullahspl 0x50
.................................
Click to expand...
Click to collapse
Might be an HSPL bug, I would flash stock rom from SD, this will replace your stock SPL back on, then flash HSPL again, then try your ROM.
orangekid said:
Might be an HSPL bug, I would flash stock rom from SD, this will replace your stock SPL back on, then flash HSPL again, then try your ROM.
Click to expand...
Click to collapse
As I advised earlier but it got ignored.
I need help. I wanted to install android on htc hd2, i previously had WM 6.5. I formated sd card and put Android rom folder on it...run clrcad.exe and haret.exe. It came to black screen with some text, last line was something about jumping to kernel. It was there like 15 min, i pulled the battery...now it wont start...what to do?
When i plug in the usb it boots up to htc screen and then again shuts and boots to htc screen and keeps going like that.
Bent battery pin.
i now have another problem, i installed magldr 1.13 and now its stuck on htc logo screen...only can pull out battery and go to bootloader...i had radio 2.xx.50.xx...all the text on bootloader is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
what to do??
Go to tricolor screen. Install stock winmo ROM and make sure the phone boots up fine, etc. Then you can start messing with it again. Note - if you install a stock rom, your hard spl will be replaced.
Did you check the bent battery pin idea? And also, may want to try the thing stated above, but use a custom ROM.
Oh, and may seem obvious but you are holding the power button down when trying to boot MAGLDR right?
Okay, so I have been putting ROMs on my HTC HD2 problem is now i have is it says.
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0X05
COTULLAHSPL 0X40
Now what exactly do I do from here? I try to start normally but it just stays on "Stick Together" Screen. Help?
What was the last thing you did before it had stopped booting (stuck on "stick-together" screen lol) ?
It won't just stop booting for no reason.
check if you can still go to magloader...then re-flash the ROM, just follow thre requirements of the ROM before flashing
download hd2 toolkit, do a task29, and install magldr 1.3, then install wich rom you like
Here check out this guide I wrote. Basically your on step 8. Something has happened and you phone is wiped, but your still good.
This guide is for cLK and and CWM.
Hope this helps!
http://forum.xda-developers.com/showthread.php?t=1402975
If you do a t29 then the phone will be completely wiped of anything including MAGLDR and wm6.5 that would be why it just stays on the boot screen. The next step would be to boot the phone by holding the volume down button and power button until it boots into a tri-color (downloader) screen. Then you can flash MAGLDR and android
Okay so I fixed this problem. If you need to know send me a message.
Sent from my HTC HD2 using XDA App