[Q] Leo stucked at HTC Starting screen - HD2 General

Hi,
I've tried to install Android on my HD2, and I guess something has bone wrong.
I've installed the HSPL 3 package, that was ok.
Then I've moved to MAGLDR installation, it was ok until the reboot, after seeing 100% on the installation process, it boot and then get stucked on the starting screen, where you can read HTC with their logo.
I've tried to perform a hard reset. Seems ok, then I press Vol Up. First, the restore time is really short (less than a second), then I press Vol Up again to boot, and I get back to HTC Starting screen...
Do you have any idea about what I'm supposed to do?
Thanks in advance for your help.
Edit :
And when I press Vol Down before power on, I got the 4 color screen with :
On the red box PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the green box Nothing
On the Blue box Nothing
On the white box Serial

Benj430061 said:
Hi,
I've tried to install Android on my HD2, and I guess something has bone wrong.
I've installed the HSPL 3 package, that was ok.
Then I've moved to MAGLDR installation, it was ok until the reboot, after seeing 100% on the installation process, it boot and then get stucked on the starting screen, where you can read HTC with their logo.
I've tried to perform a hard reset. Seems ok, then I press Vol Up. First, the restore time is really short (less than a second), then I press Vol Up again to boot, and I get back to HTC Starting screen...
Do you have any idea about what I'm supposed to do?
Thanks in advance for your help.
Edit :
And when I press Vol Down before power on, I got the 4 color screen with :
On the red box PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the green box Nothing
On the Blue box Nothing
On the white box Serial
Click to expand...
Click to collapse
Well, pardon me for saying this but you should have searched the forum and google before. So many people have seen this problem before. After hard reset, you don't have anything left on the device so just re-install.
Should work.

Thanks a lot for your reply I feel at least release, my Leo isn't dead
I did actually spent some time over google and this forum, but haven't identified any problems siilar than mine... Sorry about that.
Now you tell me that I'm supposed to reinstall, fine but... how? I know how to when you can connect the mobile to the computer with Active Sync, but without... no idea.
Could you please gie me a clue?

Read this thread carefully.
All of the steps you need are in there.
First you will need to flash a compatible Radio if you haven't done this already.
Then you need to flash the Android ROM you want to use.

Related

bootloader stuck

sorry to post again but i got to the part were you have to press the vol-down and power button and the screen with red-green-blue-wwhite comes on and has yellow writing in the red bar:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X30
Then in the white it has Serial in it
but thats it i just stays on there can anyone help please?
flunkyou2 said:
sorry to post again but i got to the part were you have to press the vol-down and power button and the screen with red-green-blue-wwhite comes on and has yellow writing in the red bar:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X30
Then in the white it has Serial in it
but thats it i just stays on there can anyone help please?
Click to expand...
Click to collapse
Hi
Why you press the Vol down and power button? Just press the power button it should load the rom. If it is fail to load the rom then you have to press Vol down+ power to get the Bootloader screen which shows three colour screen.
If that is your case then
Download your device's original rom from this forum or htc website Then connect the hd2 to the PC. THe "serial" sign will change to USB. then double click on the downloaded file. If you use Vista or Windows 7 on the pc Then right click on the downloaded file and Run as administrator. It will flash the rom for your HD2.
im just copying what the sticky says.... im trying to load 1.61, i have just turned the phone on and its still the old rom.
Wen i go in to then bootloader again should i just click the Ruu-1.61 (in windows) and follow the instructions?
ssorry im getting lost lol
flunkyou2 said:
im just copying what the sticky says.... im trying to load 1.61, i have just turned the phone on and its still the old rom.
Wen i go in to then bootloader again should i just click the Ruu-1.61 (in windows) and follow the instructions?
ssorry im getting lost lol
Click to expand...
Click to collapse
Try connecting your phone to pc via activesync and run RUU 1.61.
It worked for me and some other people here.
Good luck.
yeah it worked
the signal seems much better i get H all the time now

Strange Occurance HD2

Hi all - sorry to bother you all but i have had a starnge thing happen to my HD2 - it crashed not it wont even boot any more - i have not used any form of cooked or modded roms - i have tried soft resetting it, and hard resetting it, as a las tditched attempt i downloaded the official rom update from HTC but it just gets as far as 8% then gives an ERROR [262] which asks me to put into recovery (take out battery inster hold down volume - and turn device on) (get coloured bars then it just does the same thing all over again.
the bars tell me this
PB81100 HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade Rom code error
Please try again
i tried the task29 but that wont even go part 0% and gives the same error....
any ideas - bit noob at this :/
Cheers in advance - and help me get my baby back
^ Bump ^
No-one
D0Z3R2K4 said:
No-one
Click to expand...
Click to collapse
Hi!
I also have a problem with my phone.
I think the same as you described.
Mine also froze and after that, the phone won't go further then the white bootscreen. I also tried, several times, to hard reset it and install the latest ROM.
Mine doesn't go further then 0%. Today my phone is going to be picked up for repair. I think you should call HTC Repair service.
good luck!
D0Z3R2K4 said:
Hi all - sorry to bother you all but i have had a starnge thing happen to my HD2 - it crashed not it wont even boot any more - i have not used any form of cooked or modded roms - i have tried soft resetting it, and hard resetting it, as a las tditched attempt i downloaded the official rom update from HTC but it just gets as far as 8% then gives an ERROR [262] which asks me to put into recovery (take out battery inster hold down volume - and turn device on) (get coloured bars then it just does the same thing all over again.
the bars tell me this
PB81100 HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade Rom code error
Please try again
i tried the task29 but that wont even go part 0% and gives the same error....
any ideas - bit noob at this :/
Cheers in advance - and help me get my baby back
Click to expand...
Click to collapse
isn't that one of the tester (special) hd2's??? You might want to search hd2 gold card.
nrfitchett4 said:
isn't that one of the tester (special) hd2's??? You might want to search hd2 gold card.
Click to expand...
Click to collapse
sure you arent thinking of the ones that came with low RAM and 0.x spl?
However goldcard isn't a bad suggestion, assuming the OP has another winmo phone he can use to create it...

HELP: Phone wont start!

I need help. I wanted to install android on htc hd2, i previously had WM 6.5. I formated sd card and put Android rom folder on it...run clrcad.exe and haret.exe. It came to black screen with some text, last line was something about jumping to kernel. It was there like 15 min, i pulled the battery...now it wont start...what to do?
When i plug in the usb it boots up to htc screen and then again shuts and boots to htc screen and keeps going like that.
Bent battery pin.
i now have another problem, i installed magldr 1.13 and now its stuck on htc logo screen...only can pull out battery and go to bootloader...i had radio 2.xx.50.xx...all the text on bootloader is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
what to do??
Go to tricolor screen. Install stock winmo ROM and make sure the phone boots up fine, etc. Then you can start messing with it again. Note - if you install a stock rom, your hard spl will be replaced.
Did you check the bent battery pin idea? And also, may want to try the thing stated above, but use a custom ROM.
Oh, and may seem obvious but you are holding the power button down when trying to boot MAGLDR right?

[Q] Major Problem (N00B)

Okay, so I have been putting ROMs on my HTC HD2 problem is now i have is it says.
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0X05
COTULLAHSPL 0X40
Now what exactly do I do from here? I try to start normally but it just stays on "Stick Together" Screen. Help?
What was the last thing you did before it had stopped booting (stuck on "stick-together" screen lol) ?
It won't just stop booting for no reason.
check if you can still go to magloader...then re-flash the ROM, just follow thre requirements of the ROM before flashing
download hd2 toolkit, do a task29, and install magldr 1.3, then install wich rom you like
Here check out this guide I wrote. Basically your on step 8. Something has happened and you phone is wiped, but your still good.
This guide is for cLK and and CWM.
Hope this helps!
http://forum.xda-developers.com/showthread.php?t=1402975
If you do a t29 then the phone will be completely wiped of anything including MAGLDR and wm6.5 that would be why it just stays on the boot screen. The next step would be to boot the phone by holding the volume down button and power button until it boots into a tri-color (downloader) screen. Then you can flash MAGLDR and android
Okay so I fixed this problem. If you need to know send me a message.
Sent from my HTC HD2 using XDA App

[Q] My HTC HD2 is stuck on the Stick Together screen.

Alright so my htc hd2 was given to me by a friend it already had android in it, but being me so stupid i wanted to use windows, and i thought hard resetting would do that, so i hard reset, by holding down the power and volume up and dwn, and it did and it said press volume up to boot and i did that and its been stuck on that screen ever since id appreciate any help i can get, and since its stuck on this screen windows mobile never recognizes it, so someone pleasee hlp me out. thankkss =)
The other thing is I can still access bootloader......
that blue red and green screen when i connect it says USB, but on cpu at device center it never shows up,
On the bootloader in the red area, its says:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
All i want is it to go back to windows mobile, please help mee!!! I already have the Windows Mobile zip along with Radio and all that stuff downloaded, but i need to be guided through so please help me
I appreciate your concern.
Question: When you enter bootloader - do you connect the cable before or after? And what happens when you try to start flashing radio or wm? Does the installer say phone not connected?
/Anders
rickeymann1 said:
Alright so my htc hd2 was given to me by a friend it already had android in it, but being me so stupid i wanted to use windows, and i thought hard resetting would do that, so i hard reset, by holding down the power and volume up and dwn, and it did and it said press volume up to boot and i did that and its been stuck on that screen ever since id appreciate any help i can get, and since its stuck on this screen windows mobile never recognizes it, so someone pleasee hlp me out. thankkss =)
The other thing is I can still access bootloader......
that blue red and green screen when i connect it says USB, but on cpu at device center it never shows up,
On the bootloader in the red area, its says:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
All i want is it to go back to windows mobile, please help mee!!! I already have the Windows Mobile zip along with Radio and all that stuff downloaded, but i need to be guided through so please help me
I appreciate your concern.
Click to expand...
Click to collapse
If you run the windows mobile installer (using CustomRUU) when you are in bootloader mode, it will install winmo for you.
Yeah, I installed Windows mob, but when im tryin to install it the first step is to connect to the usb the usb is connected and it still said try8ing to connect then it went staright to error those letters i wrote come up on bootloader screen, somone guide me through this pleaseeeee.

Categories

Resources