Hello I have a new HD2 Telstra model.
I noticed the white screen is still a major issue and I have yet to solve it for my phone.
Flash memory size 512
OS 5.2.23152
Manila version 2.5.20191914.0
ROM kwbr WWE
Radio 2.07.51.22_2
My first question is why in Phone identity the phone shows as HTC HD2 T8585
It is definately a Telstra Model T9193 and I run on the Telstra 3G signal.
But here is the main issue / I cannot load "DFT_LEO_MAGLDR113_DAF"
I have "hspl 2.08" installed.
I instantly changed to "Kwbr_HD2_C3 ROM"
I can also load "Duttys_2.5_5.21916.5.0.95_3.14_HD2_ML_Family_ROM_(V12)_WWE"
So I have flashed it a few times.
When I apply "Task29 provided by doloop" it loads to only the HTC white screen and I have to remove the battery
--------------
Here is what I did, I did a Task 29 and then a hard re-boot.
From this point I can only load the 6.5 ROMS
If I try MAGLDR113 or MAGLDR112 it loads to 100% very fast/intant and then loads to HTC white screen and sticks
I have tried to hold down the right power key but that does nothing on the load.
It is the same after the Task 29
-------------------------------
Can someone walk me through the process to get the MAGLDR113 running?
Does it have to do with Flashing any Radio version?
If I wanted to load "LEO70_ROM" or "XBmod_LEO70_ROM_1.01" what do I have to do or get or delete?
Thanks Guys and Girls
well firstly your Radio is all wrong, you need to have a 2.14.50 radio
so read the forums to learn how to install that first. Make sure HSLP is installed
Then go for MAGLDR 1.12 install
Slap in a SD card you dont care about as it will get formatted
reboot phone and enter MAGLDR (do not have USB cable plugged in)
you want to install by usb mode, when its ready plug cable in, your PC may need to install a driver usually automatically
once thats all ready, run the installer of your choice and it should do the rest, important unplug the USB cable during boot or it will keep restarting.
but seriously, there are several video tutorials on here please read / watchj
everything because if you dont and you screw it up , its your own fault!
Ok thanks dude...
Just so I understand correctly what is a radio. It is the communication standard amongst the communication functions of the phone.
So is it correct that a rom will have to be compatable with the radio?
So why does a correct radio have an effect on a MAGLDR 1.12 install as it is not a standard ROM?
Also I have the standard memory card issued on the phone and I dont care if it gets wiped, is it a possibility of stopping the process if it has stuff on it?
The mystery for me is that MAGLDR 1.12 will not run and perhaps it is becasue the USB cord is still attached at the completion of the load. Everything leads to a white screen.
So will a Radio stop the MAGLDR 1.12 install?
Will a memory card stop a MAGLDR 1.12 install?
Will a USD 'still in' stop a MAGLDR 1.12 install?
Why is MAGLDR 1.12 needed when you already have a HSPL installed, I thought that was an installer?
Cheers
Peter
nope the radio shouldnt make a difference to magldr but you will need it to flash any WP7 ROM
Ok, first things first, Do you have the latest HSPL 3 installed?
next get the correct radio installed, it shouldn make a difference to magldr but its one less thing to worry about, ive always used the .50 Radios so perhaps that can make a difference yours being the .51 radio, either way get the correct Radio on it.
Ill gather you cant even install MAGLDR? so when you reboot as normal it goes straight to the OS load and not the 1..2..3..4 Go Go Go message?
If thats the case try this, turn off phone, hold vol down, then push power button, keep vol down pressed, you should see the RBG screen, connect your USb cable, (which version of windows are you using) windows 7 will install a new driver automatically that should allow you to run magldr by using the ROMUpdateUtility.exe
file
that will flash MAGLDR in much the same way as a new ROM
on reboot if you keep the USB cable plugged in it will keep restarting, unplug restart it, hold the power button down you will now have the various options to allow you to install and run various utilities, the one you want the one called USB flasher, use vol up /down to get there and hit the pickup phone button (one on left) to run it, once its ready you need to plug it in, try combos of plugged in then hit flasher and plug in after you hit flasher, cant remember which one works but one does but give windos a chance to install the driver.
once its in flashing mode and plugged in windows will install a driver, now your ready to run the ROM of your choice.
Related
Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks
you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.
thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen
first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.
when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything
You must hold power button untill menu apears!
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo
Task29 maybe can help you!
I have HD2 T Mobile and have installed gingerbread on it. I want to install WP7. can some one please help me with the procedure and which files to download.
Regards
Hemal
Sent from my HTC HD2 using XDA App
If you have a NAND Android ROM, you have MAGLDR installed on your device.
Just go into the MAGLDR screen and flash the WP7 ROM of your choice via USB.
If you run Android from SD card, WinMo still your core OS, you first need to install some other stuff (make sure to have a correct Radio ROM, HSPL 2.08 and finally MAGLDR).
Also, for a smooth WP7 operation, please check your SD card, if it´s one of the critical ones, you might have a bad experience.
WP7 ROM on Android 2.3 Nand
Hi, I tried gettin into MAGLDR screen by
1] removing battery and scard
2] Power on with vol down
3] it shows triband
4] I connect USB to phone and pc
5] I see USB written on Phone
6] Message on bottom status bar of phone identifying the phone
7] I run the DWI.exe on the desktop, but it just keeps on searching the phone on USB. does not proceed ahead
Please HELP
regards
Hemal
tictac0566 said:
If you have a NAND Android ROM, you have MAGLDR installed on your device.
Just go into the MAGLDR screen and flash the WP7 ROM of your choice via USB.
If you run Android from SD card, WinMo still your core OS, you first need to install some other stuff (make sure to have a correct Radio ROM, HSPL 2.08 and finally MAGLDR).
Also, for a smooth WP7 operation, please check your SD card, if it´s one of the critical ones, you might have a bad experience.
Click to expand...
Click to collapse
To flash from MAGLDR screen, you should not go into the standard bootloader screen (the tricolor one), but MAGLDR itself. After turning off your device, keep holding the power button, until you get the MAGLDR screen, select option 5 (flip through with volume buttons, confirm with phone button), and there you go.
patelhemals said:
Hi, I tried gettin into MAGLDR screen by
1] removing battery and scard
2] Power on with vol down
3] it shows triband
4] I connect USB to phone and pc
5] I see USB written on Phone
6] Message on bottom status bar of phone identifying the phone
7] I run the DWI.exe on the desktop, but it just keeps on searching the phone on USB. does not proceed ahead
Please HELP
regards
Hemal
Click to expand...
Click to collapse
You need to install MAGDLR by following the steps above to connect to your PC. Then restart your phone while holding the POWER button, which will get you into the MAGLDR options menu. Select option 5 with volume up/down and bottom left key.
thanks guys
OMG you flash it through MAGLDR, not BOOTLOADER.
First what you have to do is check whether your MAGLDR version is 1.12 or 1.13(recommended) if you want to install WP7, if not, flash it first and then enter USB Flasher in bootloader and run DWI.exe.
Thank u friends. I did it. Installed WP7. worked fine except the live services. Too much of a pain to activate live services on HD2. Not worth the efforts. Do we have key gen or a simple process? I just needed the gtalk. Have switched back to gingerbread.
Sent from my HTC HD2 using XDA App
Nope, there ain´t no keygen.
My own efforts actually were minimal: I sent an email to MS support, couple of hours later I had my activation code.
Look for .xap for gtalk and sideload it... I have an activation key but since there's a limit to each key on the number of activation. I'd rather have the .xap of the apps I use then like that I can use wp7 without live services... Because I know ima be switching between os's
@OP,
Please read the sticky guides in future before asking questions, there are MANY good guides on how to do everything, all you have to do is look at the sticky threads.
Thread closed.
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
So i'm pretty new to the HD2, but have flashed various ROMS etc in the past. A friend gave me his HD2 to flash Android onto, and I'm having a few problems with it.
Basically, After trying to install the MAGLDR, the phone will not boot at all. It loads up, and just sticks at the "HTC" screen. I can get into the "tri-colour" boot loader screen by doing Vol-down at startup, but whenever I try to run MAGLDR again the status bar on both the PC and the phone stay at 0%, then it errors out :\.
Any ideas how I can get this back to working? Thanks guys.
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
connexion2005 said:
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
Click to expand...
Click to collapse
Thanks for the speedy reply!
It is switching to USB when plugged in, which is good o guess. When I try to use RUU or task29, it sits at 0% for a while then goes to "Error 262". When the phone switches on (NOT into bootloader) it just sits at the "HTC" screen, and I notice the R, G, D lines are not shown at the bottom of the screen like they used to be.
I don't have an SD with me at the minute, which ROM exactly would I need to place on there?
thanks again
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
samsamuel said:
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
Click to expand...
Click to collapse
Guys, thanks so much. I got her to boot into MAGLDR and I *think* I got Clockwork Mod Recovery installed. I can now boot to the MAGLDR screen.
As I don't have the SD card from the phone (or any other SD at the moment), can anyone suggest a stable gingerbread ROM I can flash via USB Flasher? (ie it will need to come with the installer exe bundled right?). I'd prefer stock Android over a Sense ROM if possible, but I'll take whatever I can get
Thanks again!!
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
back to winmo use sd card method..
If you can enter in bootloader (with color band) VOL.DOWN + POWER
plub usb to pc and flash a stok rom
I tried this with several Official Roms but no one function..
still hang on 0 % or get a Errormessage on 1% that Image is corrupt over USB
and over SD every try hang with "Errormessage 18003 and Radio_V2 - Fail
LEOIMG.nbh - FAIL
Update Terminate
UPDATE FAIL
You didn't brick it man. Just flash CLK or MAGLDR.
I tried DFT_LEO_MAGLDR113_DAF and it gone 100% but after it I got the Error [270] File is Corrupt over USB.
Try to install MAGLDR over HD2 Toolkit, but hang on 0 %
Try to install CLW over HD2 Toolkit, it gone 100% but after it I got the Error [270] File is Corrupt
Try to install MAGLDR over SD with renameing magdlr.nbh to leoimg.nbh
Update Success but still white screen.. try to open phone with holding power key to enter magdlr menu no sucess - still white screen
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
NLsalvador said:
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
Click to expand...
Click to collapse
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
m4gnum87 said:
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
Click to expand...
Click to collapse
trying it on other computer with a good cable.maybe it's your laptop has something wrong.
try the goldcard method (you cannot generate it for free anymore, but you can google for a good one searching the CID for your sd, try several sd until you will find an sd with a know CID and a goldcard image ready to download for your CID) [try with sandisk/kingstone 2gb, goldcard is not supported with SDHC like 16gb one], and flash from sd in bootloader the nbh image extracted from wwe RUU (you will find *.nbh image under temp folders when you run *RUU*.exe)
maybe with goldcard you can force radio flashing
also try mtty and some tasks (like 2a if i remember well) that try to repair your bad blocks
if you can't solve with these 2 method, sell it on ebay and buy a new one for the same price
The official roms can be extracted with winrar, extract it and copy RUU_signed.nbh to the root of your sd card. Insert the sd and boot it holding volume down and when entered bootloader press volume up. Now it should put it back to WinMo. Then Flash HSPL and Magldr.
m4gnum87 said:
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=668347
ph03n!x said:
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
Click to expand...
Click to collapse
i tried as you told with reinstalling the drivers for WMDC and redownloading all other things but still the same s... I think the problem is the 2.08.SPL i cant change it or delete it.. or maybe a cache of anything is bricked so he hang on 0% or 1 %... i dont know im so frusted
look at my post, try goldcard method, should force flash process
pirlano said:
look at my post, try goldcard method, should force flash process
Click to expand...
Click to collapse
how i can go over the gold card method if my hd2 is not running? i see in the tutorial that i must get to storage mode and get the SD Cards Serial number..???
jak11 said:
Try this http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
The Rom is still no more avaiable to download and if start mtty i have no selection for USB :S
still not solved, i can guide you through skype it will be easier
Task29 ve HSPL 3 araçlarını tekrar indir. Belki sorun onlardadır.
Download Task29 and HSPL 3 again, the problem may belong them.
nphaibk said:
still not solved, i can guide you through skype it will be easier
Click to expand...
Click to collapse
for sure i will be avaible in 3 hours if you want?