Database Users

Stuck HD2 LEO only bootloader brick

Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.

Triceq said:
Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.
Click to expand...
Click to collapse
I know this might be a dumb question but is your sd card formatted to fat32?

nvm try to put on orignal SPL? and than try to flash to stock rom with Sdcard?

i suspect that.....
when it first wouldn't boot artemis 22 you needed to change the radio not the rom but then you flashed official rom by sd card it removed hspl and then failed because wrong region.
boot to boot loader
install hspl3 choose 2.08.hspl
return to boot loader
flash any radio mentioned in artemis thread using usb
return to boot loader
flash artemis
when phone starts to set up force hard reset
allow to boot
let us know how it goes

thank You for request
roloracer
there is no dumb question but dump anserwers . Yes, card's are formated using fat32
Veldmuus
how can I put only SPL? any solution?
samsamuel
"boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.

When you tried to flash the official stock rom back from the sd card did you make sure the rom image was called “LEOIMG.NBH” and on the root of the sd card.

Triceq said:
boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.
Click to expand...
Click to collapse
try all different usb ports. try to not use ports in the front of pc case, use one around back of the pc.
also right click hspl and choose "run as administrator"

My hd2 see sd card beacouse when slot is empty "Loading..." don't apear. When I plug card "loading..." is apear but only for one socond mayby faster.
root.. you mean file not in eny folder, just on starage card without any folders, yes?
I called leoimg.nbh every time I put file to sd card

What operating system is on the pc you are tring to flash hspl with?

samsamuel
how do You know i use front usb port?
I plug to other usb ports but effects are the same. What I discover... when the HSPL3 is searchin usb connetion and I pluget off hd2 from usb there apear Critical error from HSPL3 program. It mean probably HSPL3 connect to hd2 but stuck.
I work on Xp profesional SP3

hspl is picky about which port it uses.
Personally i would enter bootloader manually, connect to usb, wait for 'serial' to change to 'usb', and only then run hspl3.

what radio rom is currently on the hd2?

Well.. Every time i try to instal something I go manualy to bootloader. As I say hspl3 stuck at connetion with hd2, i can turn of program run again but nothing happends.
Probably radio was 2.10 or official now i dont remember but I gues 2.10

When you connect the phone to the pc the pc does detect it, right? becuase i had a couple of instances where i've tried to install updated radios, ran the installer and windows hadn't finished detecting the phone and that caused a connection issue and the radio installer to quit but when i ran it immediately after this it worked fine.
So i suggest you get the phone to the bootloader manually then connect it to the pc an then leave it a few minutes before you run the hspl3 installer.

Guys... all of You are brilliant. If I don't ask what the problem is on this forum probably I cry on my htc box. But I don't .
It's working... rom instal and everything goes well.
The thing i change to work: I change home I was in my second home and now I'm In my family home special to test instal HSPL3. I have here other USB cable and other computer with XP OS. I read all post and do all again.
First I plug usb cable to front panel... too fast, my bad. It's going wrong.
Then I read about chose different USB connector... too fast becouse when I try i fail, but read last post, plug htc to pc, go make coffe and back. Turn on HSPL3 and it's work, find my hd2 and give me a choose witch spl to instal.
Then I back to samsamuel post and make his instruction. When I end every thing work very well i restar my hd2 and by the now i don't see eny problems.
At finish I would like to thanks
roloracer
Veldmuus
and special for giving best tips
samsamuel
qwerty_7564
M3PH
Thank You very much Guys,

Good news! and now a long deep breath of relief.

No problem dude. The wait is caused by windows XP needing to install and then load a couple of drivers so it can talk to the phone in bootloader mode. If you're not amazingly rich like me (OK i'm not really) and can't afford a cutting edge PC like mine this may take a few minutes to complete.

What White screen Solution required for HD2 to run Windows 7?

Hello I have a new HD2 Telstra model.
I noticed the white screen is still a major issue and I have yet to solve it for my phone.
Flash memory size 512
OS 5.2.23152
Manila version 2.5.20191914.0
ROM kwbr WWE
Radio 2.07.51.22_2
My first question is why in Phone identity the phone shows as HTC HD2 T8585
It is definately a Telstra Model T9193 and I run on the Telstra 3G signal.
But here is the main issue / I cannot load "DFT_LEO_MAGLDR113_DAF"
I have "hspl 2.08" installed.
I instantly changed to "Kwbr_HD2_C3 ROM"
I can also load "Duttys_2.5_5.21916.5.0.95_3.14_HD2_ML_Family_ROM_(V12)_WWE"
So I have flashed it a few times.
When I apply "Task29 provided by doloop" it loads to only the HTC white screen and I have to remove the battery
--------------
Here is what I did, I did a Task 29 and then a hard re-boot.
From this point I can only load the 6.5 ROMS
If I try MAGLDR113 or MAGLDR112 it loads to 100% very fast/intant and then loads to HTC white screen and sticks
I have tried to hold down the right power key but that does nothing on the load.
It is the same after the Task 29
-------------------------------
Can someone walk me through the process to get the MAGLDR113 running?
Does it have to do with Flashing any Radio version?
If I wanted to load "LEO70_ROM" or "XBmod_LEO70_ROM_1.01" what do I have to do or get or delete?
Thanks Guys and Girls

well firstly your Radio is all wrong, you need to have a 2.14.50 radio
so read the forums to learn how to install that first. Make sure HSLP is installed
Then go for MAGLDR 1.12 install
Slap in a SD card you dont care about as it will get formatted
reboot phone and enter MAGLDR (do not have USB cable plugged in)
you want to install by usb mode, when its ready plug cable in, your PC may need to install a driver usually automatically
once thats all ready, run the installer of your choice and it should do the rest, important unplug the USB cable during boot or it will keep restarting.
but seriously, there are several video tutorials on here please read / watchj
everything because if you dont and you screw it up , its your own fault!

Ok thanks dude...
Just so I understand correctly what is a radio. It is the communication standard amongst the communication functions of the phone.
So is it correct that a rom will have to be compatable with the radio?
So why does a correct radio have an effect on a MAGLDR 1.12 install as it is not a standard ROM?
Also I have the standard memory card issued on the phone and I dont care if it gets wiped, is it a possibility of stopping the process if it has stuff on it?
The mystery for me is that MAGLDR 1.12 will not run and perhaps it is becasue the USB cord is still attached at the completion of the load. Everything leads to a white screen.
So will a Radio stop the MAGLDR 1.12 install?
Will a memory card stop a MAGLDR 1.12 install?
Will a USD 'still in' stop a MAGLDR 1.12 install?
Why is MAGLDR 1.12 needed when you already have a HSPL installed, I thought that was an installer?
Cheers
Peter

nope the radio shouldnt make a difference to magldr but you will need it to flash any WP7 ROM
Ok, first things first, Do you have the latest HSPL 3 installed?
next get the correct radio installed, it shouldn make a difference to magldr but its one less thing to worry about, ive always used the .50 Radios so perhaps that can make a difference yours being the .51 radio, either way get the correct Radio on it.
Ill gather you cant even install MAGLDR? so when you reboot as normal it goes straight to the OS load and not the 1..2..3..4 Go Go Go message?
If thats the case try this, turn off phone, hold vol down, then push power button, keep vol down pressed, you should see the RBG screen, connect your USb cable, (which version of windows are you using) windows 7 will install a new driver automatically that should allow you to run magldr by using the ROMUpdateUtility.exe
file
that will flash MAGLDR in much the same way as a new ROM
on reboot if you keep the USB cable plugged in it will keep restarting, unplug restart it, hold the power button down you will now have the various options to allow you to install and run various utilities, the one you want the one called USB flasher, use vol up /down to get there and hit the pickup phone button (one on left) to run it, once its ready you need to plug it in, try combos of plugged in then hit flasher and plug in after you hit flasher, cant remember which one works but one does but give windos a chance to install the driver.
once its in flashing mode and plugged in windows will install a driver, now your ready to run the ROM of your choice.

[Q] Possible Brick?? Some help if possible

Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??

suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio

samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.

hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.

Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???

I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?

Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot

QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.

Stupid question: you are holding down the volume down button to boot into HSPL right?

[Q] Computer won't recognize HD2 w/ WP7 to flash Android

Right now my HD2 is flashed with WP7 using Magldr. I want to get rid of the WP7 and try android. But when I plug my phone into the computer the computer won't find my phone. Zune finds it just fine, but when I search for devices nothing comes up, not even unknown. I've tried different cords, different ports and I don't know what to do.

caitiebugg87 said:
Right now my HD2 is flashed with WP7 using Magldr. I want to get rid of the WP7 and try android. But when I plug my phone into the computer the computer won't find my phone. Zune finds it just fine, but when I search for devices nothing comes up, not even unknown. I've tried different cords, different ports and I don't know what to do.
Click to expand...
Click to collapse
this is what actually did last night.....i downloaded a win6.5 rom i put the phone in bootloader(the tri color screen,u knw....volume down and power on at same time)....i then proceeded to Romupdate.....and let it flash win6.5....after that i booted...went to the win6.5 menu and reformetted the sd card....after that i mounted the sdcard and did the basic steps.....installed manglr then clockworld then install rom zip....well i hope i helped if u need help feel free to pm me

boot into the magldr loader and select usb flasher mode, see if it turns to usb

u can always flash via the microsd card.

Yes, thank you all so much!! I put it in USB Flasher Mode, and it worked!

cwm problem

when i try to instal it ,it wont do it via usb ive flashed hspl 2.08 and the right radio then magldr but cant get any further im not to sure if im doing it right as when i go to option 8 it says no boot devs

after installing magldr, how are you flashing cwm? phone is in 'usb flasher' not bootloader, right? you need to give details of your process to get any help.

ive tryd both the usb just sits doing nothing then it times out with a error and if i do it via the boot loader when the phone boots it just loads white writhing and wont go back to magldr

samuel79 said:
ive tryd both the usb just sits doing nothing then it times out with a error
Click to expand...
Click to collapse
You've installed the android usb drivers?
and if i do it via the boot loader when the phone boots it just loads white writhing and wont go back to magldr
Click to expand...
Click to collapse
theres a leoimg.nbh on the sd card.

If I am not mistaken only clk uses the Google Android drivers for USB connection. I think MAGLDR actually uses the drivers that are in Active Sync/WMDC. Plus when you use USB flasher I think MAGLDR actually auto installs the drivers that DFT included with MAGLDR. you may have to delete the drivers and let them re install.