Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks
you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.
thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen
first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.
when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything
You must hold power button untill menu apears!
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo
Task29 maybe can help you!
Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work
a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?
Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App
dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?
Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Doesn't Work
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?
nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D
LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!
same problem doesnt work
Been trying to upgrade to MAGLDR112 from 111 but the installer cant find my device. The device is in flaser mode and awaiting usb connection but the Magldr112 installer fails to connect. I tried flasing two other Android nand roms and had no problems with both (just ran the installer right after Maglrd112 install failed with error 264). So this could very well be a bug with the latest version of MAGLDR.
Task29 and magldr 1.12. Nothing else
Ducalion said:
Been trying to upgrade to MAGLDR112 from 111 but the installer cant find my device. The device is in flaser mode and awaiting usb connection but the Magldr112 installer fails to connect. I tried flasing two other Android nand roms and had no problems with both (just ran the installer right after Maglrd112 install failed with error 264). So this could very well be a bug with the latest version of MAGLDR.
Click to expand...
Click to collapse
You need your device in bootloader, not in MAGLDR.
You would flash MAGLDR like you would any WinMo ROM.
What he said.
Sent from my HTC HD2 using XDA App
1. Turn off phone
2. Plug in phone
3. Told down the volume down button and press the power button
4. Wait till you see a three colored screen
5. Flash 1.12
6. Reboot and hold power
7. Notice it now says 1.12
8. Be happy
9. Push the thank you button
What does 1.12 do that 1.11 didn't?
Ducalion said:
Been trying to upgrade to MAGLDR112 from 111 but the installer cant find my device. The device is in flaser mode and awaiting usb connection but the Magldr112 installer fails to connect. I tried flasing two other Android nand roms and had no problems with both (just ran the installer right after Maglrd112 install failed with error 264). So this could very well be a bug with the latest version of MAGLDR.
Click to expand...
Click to collapse
+1 i agree with u i pass with this then i install 111 again
I don't see the reason to upgrade to 112 unless you are using Win 7 and if you are going to use NAND android then just wait for 113.
Guys, you OBVIOUSLY don't read...
Please read post 3 and 5 then try again....You will get MAGLDR 1.12 flashed onto your HD2. There are hundreds off people that can attest this method works.....
OMG! Only if I had known this method sooner I wouldn't have wasted so much time updating MAGLDR by downgrading back to WinMo then MAGLDR again..
Sent from my HTC HD2 using Tapatalk
Ducalion said:
Been trying to upgrade to MAGLDR112 from 111 but the installer cant find my device. The device is in flaser mode and awaiting usb connection but the Magldr112 installer fails to connect. I tried flasing two other Android nand roms and had no problems with both (just ran the installer right after Maglrd112 install failed with error 264). So this could very well be a bug with the latest version of MAGLDR.
Click to expand...
Click to collapse
I've had the same issues for 1.12. I think it has something to do with it being plugged in.
Before you boot, unplug. Then get to the magldr screen. Then go to USB flasher. Then plug in USB. Run DFT.
This has worked for me every time.
Read some posts people before you start flashing **** !
Solved!
Thanks everyone especially 'Mindstormmaster1'! I learn new things everyday with XDA!! Love this community!!
To UPGRADE boodloader follwo the steps below.
1. Turn off phone
2. Plug in phone
3. Hold down the volume down button and press the power button
4. Wait till you see a three colored screen
5. Flash boot rom
6. Reboot and hold power
7. Confirm the new boot loader version
8. Be happy
9. Push the thank you button for Mindstormmaster1
To flash a new nand Rom with existing boot loader follw the steps below,
1. Reboot and hold power until you see the boot loader menu
2. Use volume button and select Usb Flasher
3. Connect USB cord
4. Flash new rom
5. Reboot and be happy
6. Push the thank you button of someone (or Mindstormmaster1's of course)
Thanks!
anonuser1 said:
I've had the same issues for 1.12. I think it has something to do with it being plugged in.
Before you boot, unplug. Then get to the magldr screen. Then go to USB flasher. Then plug in USB. Run DFT.
This has worked for me every time.
Click to expand...
Click to collapse
wth are you talking about? You dont flash magldr with magldr, you flash it with bootloader.
So either you are talking out of your backside or you didnt even read the comment you are replying to.
mindstormmaster1 said:
1. Turn off phone
2. Plug in phone
3. Told down the volume down button and press the power button
4. Wait till you see a three colored screen
5. Flash 1.12
6. Reboot and hold power
7. Notice it now says 1.12
8. Be happy
9. Push the thank you button
Click to expand...
Click to collapse
thanks, looking for it now
Hello I have a new HD2 Telstra model.
I noticed the white screen is still a major issue and I have yet to solve it for my phone.
Flash memory size 512
OS 5.2.23152
Manila version 2.5.20191914.0
ROM kwbr WWE
Radio 2.07.51.22_2
My first question is why in Phone identity the phone shows as HTC HD2 T8585
It is definately a Telstra Model T9193 and I run on the Telstra 3G signal.
But here is the main issue / I cannot load "DFT_LEO_MAGLDR113_DAF"
I have "hspl 2.08" installed.
I instantly changed to "Kwbr_HD2_C3 ROM"
I can also load "Duttys_2.5_5.21916.5.0.95_3.14_HD2_ML_Family_ROM_(V12)_WWE"
So I have flashed it a few times.
When I apply "Task29 provided by doloop" it loads to only the HTC white screen and I have to remove the battery
--------------
Here is what I did, I did a Task 29 and then a hard re-boot.
From this point I can only load the 6.5 ROMS
If I try MAGLDR113 or MAGLDR112 it loads to 100% very fast/intant and then loads to HTC white screen and sticks
I have tried to hold down the right power key but that does nothing on the load.
It is the same after the Task 29
-------------------------------
Can someone walk me through the process to get the MAGLDR113 running?
Does it have to do with Flashing any Radio version?
If I wanted to load "LEO70_ROM" or "XBmod_LEO70_ROM_1.01" what do I have to do or get or delete?
Thanks Guys and Girls
well firstly your Radio is all wrong, you need to have a 2.14.50 radio
so read the forums to learn how to install that first. Make sure HSLP is installed
Then go for MAGLDR 1.12 install
Slap in a SD card you dont care about as it will get formatted
reboot phone and enter MAGLDR (do not have USB cable plugged in)
you want to install by usb mode, when its ready plug cable in, your PC may need to install a driver usually automatically
once thats all ready, run the installer of your choice and it should do the rest, important unplug the USB cable during boot or it will keep restarting.
but seriously, there are several video tutorials on here please read / watchj
everything because if you dont and you screw it up , its your own fault!
Ok thanks dude...
Just so I understand correctly what is a radio. It is the communication standard amongst the communication functions of the phone.
So is it correct that a rom will have to be compatable with the radio?
So why does a correct radio have an effect on a MAGLDR 1.12 install as it is not a standard ROM?
Also I have the standard memory card issued on the phone and I dont care if it gets wiped, is it a possibility of stopping the process if it has stuff on it?
The mystery for me is that MAGLDR 1.12 will not run and perhaps it is becasue the USB cord is still attached at the completion of the load. Everything leads to a white screen.
So will a Radio stop the MAGLDR 1.12 install?
Will a memory card stop a MAGLDR 1.12 install?
Will a USD 'still in' stop a MAGLDR 1.12 install?
Why is MAGLDR 1.12 needed when you already have a HSPL installed, I thought that was an installer?
Cheers
Peter
nope the radio shouldnt make a difference to magldr but you will need it to flash any WP7 ROM
Ok, first things first, Do you have the latest HSPL 3 installed?
next get the correct radio installed, it shouldn make a difference to magldr but its one less thing to worry about, ive always used the .50 Radios so perhaps that can make a difference yours being the .51 radio, either way get the correct Radio on it.
Ill gather you cant even install MAGLDR? so when you reboot as normal it goes straight to the OS load and not the 1..2..3..4 Go Go Go message?
If thats the case try this, turn off phone, hold vol down, then push power button, keep vol down pressed, you should see the RBG screen, connect your USb cable, (which version of windows are you using) windows 7 will install a new driver automatically that should allow you to run magldr by using the ROMUpdateUtility.exe
file
that will flash MAGLDR in much the same way as a new ROM
on reboot if you keep the USB cable plugged in it will keep restarting, unplug restart it, hold the power button down you will now have the various options to allow you to install and run various utilities, the one you want the one called USB flasher, use vol up /down to get there and hit the pickup phone button (one on left) to run it, once its ready you need to plug it in, try combos of plugged in then hit flasher and plug in after you hit flasher, cant remember which one works but one does but give windos a chance to install the driver.
once its in flashing mode and plugged in windows will install a driver, now your ready to run the ROM of your choice.
Hi,
I've been browsing this and other forums to cope without asking but it seems impossible.
When installing MAGDLR 1.13 I can't connect my phone to the computer. I have connection error 260. Switching ports didn't work. I'm running ROMUpdateUtility.exe as admin.
I have 2.08 hspl, radio 2.15.50.14 and nand android [DFT]LEO "Stock Desire" NAND Android ROM by Cotulla.
I wanted to change my present ROM for newer one with smaller battery consumption, but main reason is that my phone speaker is dead. It worked more and more silent and stopped finally. Sometimes when I blow in it hard it works again for few seconds but after that I have to turn on loud speaker again...I hope it's software issue somehow...
Thanks for any help!
Wait... why are you running the RUU if all you wanna do is flash a new ROM? An android one or WinMo? If its an Android one, go to MAGLDR and go to USB flasher then open the daf file on your PC. Make sure you have "Allow USB connections" unticked in ActiveSync.
I don't think the speaker is a software problem also. Its probably just ran its course now and blown.
Sent from my HTC Vision using XDA App
an android one, but as I understand/read they all need MAGDLR 1.13 that's why I want to install it. ActiveSync on phone or PC? SOry for that question but I'm not the smartest when it comes to this stuff. As I know I don't have ActiveSync on Vista.
Thanks for fast reply
Hold the power button, if all goes well, you Magldr the menu, go to option five (with the volume control keys, select option do you pick the''send'') put the USB cable into your phone, Start the daf, Have fun!
I'll try that and let you know how it went
thx
Same problem
I installed MAGLDR 1.13, the tried getting back to windows mobile. the speaker is dead.
bartjuhhbartyow said:
Hold the power button, if all goes well, you Magldr the menu, go to option five (with the volume control keys, select option do you pick the''send'') put the USB cable into your phone, Start the daf, Have fun!
Click to expand...
Click to collapse
But to get to DAF stage i,need to have magldr 11.13. Unfortuately i get 264 error. The same happens when i try from this 3coloured screen..any more ideas?
Sent from my HTC HD2 using XDA App
I have a problem with DFT MAGLDR Bootloader 1.13 version. I have HSPL 2.08 version and radio 2.15.50.14 version. I connect my HD2 and synchronize it with my computer but when I run ROMUpdateUtility the device is restarting and the progress bar is on 0% all the time. After about 30 minute the ERROR 262 appears on the screen. But the connection 'HD2->My Computer' is correct. Do you have any idea what the problem is ? Please help me.....
miod3k
Also are you right clicking the RUU and selecting run as adminastrator?
Also are you right clicking the RUU and selecting run as adminastrator?
Click to expand...
Click to collapse
Yes I do this, but it's no take effect.
HELP!!!!!
miod3k said:
Yes I do this, but it's no take effect.
HELP!!!!!
Click to expand...
Click to collapse
Hey, try re-downloading MAGLDR and connecting via another usb port or preferably another system with htc drivers installed...Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?
If you are still having trouble click on the link in my signature that says guide and it tells you step by step how to flash MAGLDR by flashing via bootloader. Also like the post above said try all the USB ports if you have trouble with one.
Hey, try re-downloading MAGLDR and connecting via another usb port
Click to expand...
Click to collapse
I do this but it's no take effect.
Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?
Click to expand...
Click to collapse
It's USB
You can also flash MAGLDR via SD card just like you can a Windows Mobile ROM. Just copy the magldr.nbh file and change the magldr.nbh file name to leoimg.nbh then copy the leoimag.nbh file to the root of your SD card. Boot your HD2 into bootloader and press the end button to comfirm when it ask if you want to flash the image.
Click to expand...
Click to collapse
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?
miod3k said:
I do this but it's no take effect.
It's USB
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?
Click to expand...
Click to collapse
Here r d steps and it has worked countless times...
1. U must have performed a HSPL 2.08 (not 3.03) using HSPL3/4 software. (connect usb & restart in bootloader mode)
2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
3. Flash MAGLDR 1.13 by powering up in bootloader, connecting usb and running "RUU.exe" as Admin.
Going CWM Way?
4. Flash CWM by launching MAGLDR (Press & hold down d end key), using volume keys, scroll down & select usb flasher...Run "Daf.exe" contained in CWM folder.
5. Copy android build to root of already full-formatted sd card.
6. Enter MAGLDR mode & scroll down to AD Recovery..Enter....CWM should load up.
7. Select "Install zip from sd card".
8. Select d desired build...Enter..Scroll down to Yes, Install.....
9. Flash Away.
10. Wait for successful confirmation then select "reboot phone" ..
ENJOY!!!
2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
Click to expand...
Click to collapse
I try do this, but after I run task29.exe I have this image on ma screen
And the progress bar was no changes(all the time is 0%). I must remove battery and put it into my HD2 again to run operating system.
Please help!!! :-(
It works!!!! I reinstall HSPL downloaded from another source and MAGLDR was install without any problem.
Thanks all of you for help....
Greetings
miod3k
problem with installation
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...
schnatterinchen said:
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...
Click to expand...
Click to collapse
change the HSPL to 2.08, it will not work with 3.03
but my device doesn't start ... when I push the power button, it hangs up so I couldn't connect it to my pc ...
take the battery out for 30 minutes and then try getting into the boot loader
how can I get into the boot loader? ...
schnatterinchen said:
how can I get into the boot loader? ...
Click to expand...
Click to collapse
hold down the volume key as per instructions when you originally flashed
Remove the cable from your device
try to to open ActivSync settings
and uncheck accept usb connection or something like that ...
reconnect your device again the try flash MAGDLR
i think it wil work for you
thx anyway ... but it won't work ... when I push the powerbutton, my device is vibrating like when it starts normally ... about one second later the tmo logo is fading up and then the diplay is freezing ... there is no other reaction ...
need help
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these (
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15