Database Users

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.

I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work

a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?

Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?

Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...

MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.

Doesn't Work

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...

Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.

sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D

LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!

same problem doesnt work

[Q] Cannot start bootloader, HD2 stuck on HTC logo screen

WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?

Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App

unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)

help!i have the really same problem!thx!

This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card

could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.

Also post in the right section in the future

All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.

I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.

dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear

load the hard SPL than magledr than rom it works 100%

Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?

Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards

my volume key not work and now i cant use the bootloader,please

hey anybody here??????????????

now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help

now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127

[Q] Install magldr 1.13 with 1.11

Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks

you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,

i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?

mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.

thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen

first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.

when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything

You must hold power button untill menu apears!

magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo

comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.

samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo

Task29 maybe can help you!

[Q] noob question

which rom should i use?? and guide please
thank u
i am new so pls help

k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob

thank you i will try that later

Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...

help. stuck in magldr 1.11

cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????

What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?

lqtdc said:
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
Click to expand...
Click to collapse
You should really get your volume button checked. If its a hardware problem, then it can be fixed. Otherwise its bricked

If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..

smokers said:
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
Click to expand...
Click to collapse
no the button work ok. when i press in magldr 1.11 works ok.

shanman-2 said:
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
Click to expand...
Click to collapse
sorry, to do this i have to be in android, dont???

Yep
Sent from my Nexus One using xda premium

there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???

shanman-2 said:
Yep
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
sorry but i dont have a android to flash without recovery

lqtdc said:
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
Click to expand...
Click to collapse
No.
Have you got the hd2 Nand toolkit?
What s the set up on the phone?
Spl etc
Sent from my Nexus One using xda premium

i have the 2.08 SPL or HSPL i dont remenber but i can put the magldr 1.11 with the romutility from windows but now i cant put in bootloader screen to put the magldr 1.13. i dont check the value of the radio.

Just in case ..are you holding volume down button and pressing and releasing power button while still holding volume button?
It really looks like there is a prob with the volume. As was said already it can be fixed
A cracked volume ribbon cable is not uncommon! !
Sent from my Nexus One using xda premium

the button is not the problem. when the magldr 1.11 loads the button works ok.

Magldr does not change the radio!
What exactly did you so?
Sent from my Nexus One using xda premium

i dont check the radio when install the magldr 1.11.
first i install the 2.08 HSPL, then with the ROMUpdateUtility install MAGLDR 1.11.
i never can put the phone in bootloader mode, that is my problem. i dont know what is the radio

i would suggest making a clear install using the task29 or WM1.66 instal ect.
you have to hold the vol down button while loading
I hav had a problem with magldr1.13 which was caused by the radio - it didnt want to install on the 2.15.50.14 radio and i have had to downgrade my radio, install magldr1.13 and the update the radio to the 2.50.15.14.
but still consider a fresh install of all things to eliminate some stuff staying in the nand memory after such things ...

my problem is i cant put the phone in bootloader mode (Vol Down + Power).

Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.

powerofthink said:
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
Click to expand...
Click to collapse
I don't think auto loading to bootloader works in magldr.
lqtdc said:
the button is not the problem. when the magldr 1.11 loads the button works ok.
Click to expand...
Click to collapse
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?

You seem stuck and may have a bricked phone, try this
hengsheng120 said:
I don't think auto loading to bootloader works in magldr.
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
Click to expand...
Click to collapse
Seems you are stuck, maybe you want to try this:
1. Try to start your phone by holding Volume Down and then press the power button. Keep pressing the Volume down. You should you see the four-color (red, green, blue, white) bootloader screen
2. Check that it says 2.08.HSPL (if not, you should start by flashing the correct HSPL by connecting phone by USB and using HSLP4.exe (run as Administrator in Windows)
3. If you have the correct HSPL check that you have 2.15.50.14 Radio ROM installed. If not, you cannot proceed. (Tip: check every file you wodnload if has been correcty received)
4. If all the above things are correct you can flash MAGLDR 1.3) Still using Voluime Down and powes and the four-color (red, green, blue, white) bootloader screen
5. Now you can boot the phone by pressing and holiding down power. MAGLDR will boot, choos 5 USB Flash and flash your favourite version of Clockworkmod (250 Mb version recommended)
Now you are ready to use MAGLDR and/or Clockworkmod any way you want.
If you skip/downgrade and of use DAF update after 5, your phone will be confused as hell. In that case do a TASK29 and start again from step 1.
Alternatively get a copy of HD2-Tool and do all above steps with that. Its really good.