Database Users

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.

I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work

a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?

Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?

Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...

MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.

Doesn't Work

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...

Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.

sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D

LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!

same problem doesnt work

[Q] Cannot start bootloader, HD2 stuck on HTC logo screen

WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?

Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App

unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)

help!i have the really same problem!thx!

This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card

could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.

Also post in the right section in the future

All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.

I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.

dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear

load the hard SPL than magledr than rom it works 100%

Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?

Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards

my volume key not work and now i cant use the bootloader,please

hey anybody here??????????????

now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help

now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127

[Q] Install magldr 1.13 with 1.11

Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks

you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,

i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?

mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.

thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen

first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.

when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything

You must hold power button untill menu apears!

magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo

comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.

samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo

Task29 maybe can help you!

What White screen Solution required for HD2 to run Windows 7?

Hello I have a new HD2 Telstra model.
I noticed the white screen is still a major issue and I have yet to solve it for my phone.
Flash memory size 512
OS 5.2.23152
Manila version 2.5.20191914.0
ROM kwbr WWE
Radio 2.07.51.22_2
My first question is why in Phone identity the phone shows as HTC HD2 T8585
It is definately a Telstra Model T9193 and I run on the Telstra 3G signal.
But here is the main issue / I cannot load "DFT_LEO_MAGLDR113_DAF"
I have "hspl 2.08" installed.
I instantly changed to "Kwbr_HD2_C3 ROM"
I can also load "Duttys_2.5_5.21916.5.0.95_3.14_HD2_ML_Family_ROM_(V12)_WWE"
So I have flashed it a few times.
When I apply "Task29 provided by doloop" it loads to only the HTC white screen and I have to remove the battery
--------------
Here is what I did, I did a Task 29 and then a hard re-boot.
From this point I can only load the 6.5 ROMS
If I try MAGLDR113 or MAGLDR112 it loads to 100% very fast/intant and then loads to HTC white screen and sticks
I have tried to hold down the right power key but that does nothing on the load.
It is the same after the Task 29
-------------------------------
Can someone walk me through the process to get the MAGLDR113 running?
Does it have to do with Flashing any Radio version?
If I wanted to load "LEO70_ROM" or "XBmod_LEO70_ROM_1.01" what do I have to do or get or delete?
Thanks Guys and Girls

well firstly your Radio is all wrong, you need to have a 2.14.50 radio
so read the forums to learn how to install that first. Make sure HSLP is installed
Then go for MAGLDR 1.12 install
Slap in a SD card you dont care about as it will get formatted
reboot phone and enter MAGLDR (do not have USB cable plugged in)
you want to install by usb mode, when its ready plug cable in, your PC may need to install a driver usually automatically
once thats all ready, run the installer of your choice and it should do the rest, important unplug the USB cable during boot or it will keep restarting.
but seriously, there are several video tutorials on here please read / watchj
everything because if you dont and you screw it up , its your own fault!

Ok thanks dude...
Just so I understand correctly what is a radio. It is the communication standard amongst the communication functions of the phone.
So is it correct that a rom will have to be compatable with the radio?
So why does a correct radio have an effect on a MAGLDR 1.12 install as it is not a standard ROM?
Also I have the standard memory card issued on the phone and I dont care if it gets wiped, is it a possibility of stopping the process if it has stuff on it?
The mystery for me is that MAGLDR 1.12 will not run and perhaps it is becasue the USB cord is still attached at the completion of the load. Everything leads to a white screen.
So will a Radio stop the MAGLDR 1.12 install?
Will a memory card stop a MAGLDR 1.12 install?
Will a USD 'still in' stop a MAGLDR 1.12 install?
Why is MAGLDR 1.12 needed when you already have a HSPL installed, I thought that was an installer?
Cheers
Peter

nope the radio shouldnt make a difference to magldr but you will need it to flash any WP7 ROM
Ok, first things first, Do you have the latest HSPL 3 installed?
next get the correct radio installed, it shouldn make a difference to magldr but its one less thing to worry about, ive always used the .50 Radios so perhaps that can make a difference yours being the .51 radio, either way get the correct Radio on it.
Ill gather you cant even install MAGLDR? so when you reboot as normal it goes straight to the OS load and not the 1..2..3..4 Go Go Go message?
If thats the case try this, turn off phone, hold vol down, then push power button, keep vol down pressed, you should see the RBG screen, connect your USb cable, (which version of windows are you using) windows 7 will install a new driver automatically that should allow you to run magldr by using the ROMUpdateUtility.exe
file
that will flash MAGLDR in much the same way as a new ROM
on reboot if you keep the USB cable plugged in it will keep restarting, unplug restart it, hold the power button down you will now have the various options to allow you to install and run various utilities, the one you want the one called USB flasher, use vol up /down to get there and hit the pickup phone button (one on left) to run it, once its ready you need to plug it in, try combos of plugged in then hit flasher and plug in after you hit flasher, cant remember which one works but one does but give windos a chance to install the driver.
once its in flashing mode and plugged in windows will install a driver, now your ready to run the ROM of your choice.

Want to install WP7 over existing gingerbread. How do I do it?

I have HD2 T Mobile and have installed gingerbread on it. I want to install WP7. can some one please help me with the procedure and which files to download.
Regards
Hemal
Sent from my HTC HD2 using XDA App

If you have a NAND Android ROM, you have MAGLDR installed on your device.
Just go into the MAGLDR screen and flash the WP7 ROM of your choice via USB.
If you run Android from SD card, WinMo still your core OS, you first need to install some other stuff (make sure to have a correct Radio ROM, HSPL 2.08 and finally MAGLDR).
Also, for a smooth WP7 operation, please check your SD card, if it´s one of the critical ones, you might have a bad experience.

WP7 ROM on Android 2.3 Nand
Hi, I tried gettin into MAGLDR screen by
1] removing battery and scard
2] Power on with vol down
3] it shows triband
4] I connect USB to phone and pc
5] I see USB written on Phone
6] Message on bottom status bar of phone identifying the phone
7] I run the DWI.exe on the desktop, but it just keeps on searching the phone on USB. does not proceed ahead
Please HELP
regards
Hemal
tictac0566 said:
If you have a NAND Android ROM, you have MAGLDR installed on your device.
Just go into the MAGLDR screen and flash the WP7 ROM of your choice via USB.
If you run Android from SD card, WinMo still your core OS, you first need to install some other stuff (make sure to have a correct Radio ROM, HSPL 2.08 and finally MAGLDR).
Also, for a smooth WP7 operation, please check your SD card, if it´s one of the critical ones, you might have a bad experience.
Click to expand...
Click to collapse

To flash from MAGLDR screen, you should not go into the standard bootloader screen (the tricolor one), but MAGLDR itself. After turning off your device, keep holding the power button, until you get the MAGLDR screen, select option 5 (flip through with volume buttons, confirm with phone button), and there you go.

patelhemals said:
Hi, I tried gettin into MAGLDR screen by
1] removing battery and scard
2] Power on with vol down
3] it shows triband
4] I connect USB to phone and pc
5] I see USB written on Phone
6] Message on bottom status bar of phone identifying the phone
7] I run the DWI.exe on the desktop, but it just keeps on searching the phone on USB. does not proceed ahead
Please HELP
regards
Hemal
Click to expand...
Click to collapse
You need to install MAGDLR by following the steps above to connect to your PC. Then restart your phone while holding the POWER button, which will get you into the MAGLDR options menu. Select option 5 with volume up/down and bottom left key.

thanks guys

OMG you flash it through MAGLDR, not BOOTLOADER.
First what you have to do is check whether your MAGLDR version is 1.12 or 1.13(recommended) if you want to install WP7, if not, flash it first and then enter USB Flasher in bootloader and run DWI.exe.

Thank u friends. I did it. Installed WP7. worked fine except the live services. Too much of a pain to activate live services on HD2. Not worth the efforts. Do we have key gen or a simple process? I just needed the gtalk. Have switched back to gingerbread.
Sent from my HTC HD2 using XDA App

Nope, there ain´t no keygen.
My own efforts actually were minimal: I sent an email to MS support, couple of hours later I had my activation code.

Look for .xap for gtalk and sideload it... I have an activation key but since there's a limit to each key on the number of activation. I'd rather have the .xap of the apps I use then like that I can use wp7 without live services... Because I know ima be switching between os's

@OP,
Please read the sticky guides in future before asking questions, there are MANY good guides on how to do everything, all you have to do is look at the sticky threads.
Thread closed.