Database Users

[TUT]MAGLDR Help[TUT]

Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.

This wont help people with the stuck on go go go problem.
I fix however is being worked on.

bazgee said:
This wont help people with the stuck on go go go problem.
I fix however is being worked on.
Click to expand...
Click to collapse
Depends on which go go go problem it is. And if you follow the steps correctly, it should. But it should help alot of the people who have no idea where to start.

lamario said:
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it.
Click to expand...
Click to collapse
I understand you're trying to help people, but at least try not to feed them wrong information with typos and what not.
2.08 HSPL, not 2.80.
You're going to have new flashers pulling out their hair looking for a non existent HSPL.

lamario said:
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
Click to expand...
Click to collapse
not daf.exe... but ROMUpdateUtility.exe
And there are some issues to fix... the bootloop... for example!

My HD2 won't boot after installing MAGLDR, what should I do ? It's stuck at boot screen.

magldr.nbh said:
battery out.
back in.
hold down volume down and power button (red/end/power).
release power.
connect to computer in tri-colour hsplCOTULLA bootloader screen/mode.
use mtty drivers just like task 29 with signature enforcement off (see mtty thread etc etc etc).
do task 29 here first (see mtty thread also).
--- then once clean ---
run romupdateutility from magldr archive whilst in tri-color screen (as if you skipped task 29)...
re-flash magldr.
goto usb-flasher in magldr menu.
connect usb.
run DAF.EXE.
Click to expand...
Click to collapse
what can i do about the Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)?

lamario said:
Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.
Click to expand...
Click to collapse
Make sure that you run all programs on CPU as "administrator".
Sent from my HTC HD2 using XDA App

Installed and running perfectly. Thanks a lot. My phone feels like it was always meant to be an Android phone, a high end one at that.

magldr.nbh said:
NO. He is correct.
you do ruu to do magldr after/via hspl.
then sync with magldr and DAF.EXE
Thanks senior.
Click to expand...
Click to collapse
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...

sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help

Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.

USB init failed Info: .\RSPL\RSPL.cpp (723)
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)

sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Are you running xp? Go to Activesync and uncheck "allow usb connections". Reconnect phone, run daf.exe as administrator.

ViK210 said:
Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.
Click to expand...
Click to collapse
Its working now. I have updated the radio to 2.15.50.14 and everything is good. Its a must have ROM. Thanks everyone.

caedanne said:
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...
Click to expand...
Click to collapse
If I'm doing it wrong, then do it right yourself. Make a tutorial and put it up. It will phase mine out. I never said it was step by step, I just wanted to post something to help the people who were having problems, if you arent having problems why is my short tutorial giving you such grief?
jpack1983 said:
sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help
Click to expand...
Click to collapse
I havent had much luck with booting sd builds, sorry I couldnt be of more assistance.
sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Start everything from begining and try again. Flash stock shipped winmo rom to revert phone, then upgrade to hspl3 then continue through.

What White screen Solution required for HD2 to run Windows 7?

Hello I have a new HD2 Telstra model.
I noticed the white screen is still a major issue and I have yet to solve it for my phone.
Flash memory size 512
OS 5.2.23152
Manila version 2.5.20191914.0
ROM kwbr WWE
Radio 2.07.51.22_2
My first question is why in Phone identity the phone shows as HTC HD2 T8585
It is definately a Telstra Model T9193 and I run on the Telstra 3G signal.
But here is the main issue / I cannot load "DFT_LEO_MAGLDR113_DAF"
I have "hspl 2.08" installed.
I instantly changed to "Kwbr_HD2_C3 ROM"
I can also load "Duttys_2.5_5.21916.5.0.95_3.14_HD2_ML_Family_ROM_(V12)_WWE"
So I have flashed it a few times.
When I apply "Task29 provided by doloop" it loads to only the HTC white screen and I have to remove the battery
--------------
Here is what I did, I did a Task 29 and then a hard re-boot.
From this point I can only load the 6.5 ROMS
If I try MAGLDR113 or MAGLDR112 it loads to 100% very fast/intant and then loads to HTC white screen and sticks
I have tried to hold down the right power key but that does nothing on the load.
It is the same after the Task 29
-------------------------------
Can someone walk me through the process to get the MAGLDR113 running?
Does it have to do with Flashing any Radio version?
If I wanted to load "LEO70_ROM" or "XBmod_LEO70_ROM_1.01" what do I have to do or get or delete?
Thanks Guys and Girls

well firstly your Radio is all wrong, you need to have a 2.14.50 radio
so read the forums to learn how to install that first. Make sure HSLP is installed
Then go for MAGLDR 1.12 install
Slap in a SD card you dont care about as it will get formatted
reboot phone and enter MAGLDR (do not have USB cable plugged in)
you want to install by usb mode, when its ready plug cable in, your PC may need to install a driver usually automatically
once thats all ready, run the installer of your choice and it should do the rest, important unplug the USB cable during boot or it will keep restarting.
but seriously, there are several video tutorials on here please read / watchj
everything because if you dont and you screw it up , its your own fault!

Ok thanks dude...
Just so I understand correctly what is a radio. It is the communication standard amongst the communication functions of the phone.
So is it correct that a rom will have to be compatable with the radio?
So why does a correct radio have an effect on a MAGLDR 1.12 install as it is not a standard ROM?
Also I have the standard memory card issued on the phone and I dont care if it gets wiped, is it a possibility of stopping the process if it has stuff on it?
The mystery for me is that MAGLDR 1.12 will not run and perhaps it is becasue the USB cord is still attached at the completion of the load. Everything leads to a white screen.
So will a Radio stop the MAGLDR 1.12 install?
Will a memory card stop a MAGLDR 1.12 install?
Will a USD 'still in' stop a MAGLDR 1.12 install?
Why is MAGLDR 1.12 needed when you already have a HSPL installed, I thought that was an installer?
Cheers
Peter

nope the radio shouldnt make a difference to magldr but you will need it to flash any WP7 ROM
Ok, first things first, Do you have the latest HSPL 3 installed?
next get the correct radio installed, it shouldn make a difference to magldr but its one less thing to worry about, ive always used the .50 Radios so perhaps that can make a difference yours being the .51 radio, either way get the correct Radio on it.
Ill gather you cant even install MAGLDR? so when you reboot as normal it goes straight to the OS load and not the 1..2..3..4 Go Go Go message?
If thats the case try this, turn off phone, hold vol down, then push power button, keep vol down pressed, you should see the RBG screen, connect your USb cable, (which version of windows are you using) windows 7 will install a new driver automatically that should allow you to run magldr by using the ROMUpdateUtility.exe
file
that will flash MAGLDR in much the same way as a new ROM
on reboot if you keep the USB cable plugged in it will keep restarting, unplug restart it, hold the power button down you will now have the various options to allow you to install and run various utilities, the one you want the one called USB flasher, use vol up /down to get there and hit the pickup phone button (one on left) to run it, once its ready you need to plug it in, try combos of plugged in then hit flasher and plug in after you hit flasher, cant remember which one works but one does but give windos a chance to install the driver.
once its in flashing mode and plugged in windows will install a driver, now your ready to run the ROM of your choice.

Guide to Install wp7 on HD2

I saw a few people asking on how to install WP7 on their HD2 and thought I will try to help out by giving a short guide with links for those that struggle to find all the different information. Please make sure that you read the installation instructions for the ROM you wish to install as this does not replace those...its ONLY meant to help those looking for information. Also read the information in each link posted for each step. Please feel free to add any corrections, installation tips etc into this thread.
CREDITS
I would like to mention that everything you read in this post is just gathering of information from other threads and that the credit is not due to me BUT to those people that put in a lot of effort to make all this possible to us. When you thank people...thank those in the threads listed below as they are the ones deserving the credit. Also thanks to XDA for making all this possible to us the community and for running well organized forums...your efforts are appreciated.
WARNING
· When installing WP7 your SD Card will be formatted during the installation process. Please make sure that you have made a backup of your SD Card prior to installing.
· When installing WP7 your phones warranty will no longer be valid.
· Please know there is a risk of bricking your phone...however the risk is very slim, but its there.
Steps of installation
1) Install HSPL2
2) Install Radio (2.14.40.04)
3) Install MagLDR (Ver 1.12 or Ver 1.13)
4) Install WP7 ROM
5) Install Zune
6) Install WP7 SDK
7) Install XAP's
8) Video
9) Additional Information
10) Trouble Shooting
Step 1 – Install HSPL2
http://forum.xda-developers.com/showthread.php?t=611433
To check your HSPL version hold the volume down button...press the power button (red phone button at bottom left) till phone reboots.
· You need HSPL2.08 or higher
If you have to downgrade your SPL version in order to get to HSPL2.08 have a look here http://forum.xda-developers.com/showthread.php?t=898128 and at the bottom you will see a post explaining a bit more with this link to ROM's http://forum.xda-developers.com/showthread.php?t=623283
Step 2 – Install Radio
http://forum.xda-developers.com/showthread.php?t=611787
Make sure you read up on the radio's and that the radio you select will work on your phone. Example...don't use a USA radio (1024 ROM) for a 512 (ROM).
· Get Radio (I used Leo_RADIO_2.14.50.02)
· Reboot Phone – press volume down button to enter boot loader
· Run CustomRUU (From Radio folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing
Step 3 – Install MagLDR
http://forum.xda-developers.com/showthread.php?t=893618
· You need MagLDR 1.12 or higher
· Reboot Phone – press volume down button to enter boot loader
· Run ROMUpdateUtility (From MagLDR folder on PC)
· Follow instructions on PC screen
· You will notice on phone and PC that its installing (It might wait a bit on 96% but don’t worry about that its normal)
· Boot into MagLDR by holding power button down
Step 4 - Install WP7 ROM
I would recommend to install one of the ROM’s that has already unlocked your phone as it will ease your process. Choose a ROM from here: http://forum.xda-developers.com/forumdisplay.php?f=977
You need installed MAGLDR 1.12 or higher (Done in Step 3)
· Enter MAGLDR loader by pressing and holding the "Power button" if you aren’t already in it (End of Step 3).
· Choose point 5 - "USB Flasher" then press Green button
· Run DWI.exe (Vista/ W7 user should do that with administrator rights)
· Done, you have WP7 ROM on your device
Step 5 – Install Zune
http://download.microsoft.com/download/5/B/4/5B41E996-7CC5-400B-802C-69FBB3B492EF/ZunePackage47.exe
Step 6 – Install WP7 SDK
http://forum.xda-developers.com/showthread.php?t=920275
For installing the WP7 SDK on XP Scroll down to Basingwas post…its the 5th one in that thread…it worked for me on XP.
Step 7 – Install XAP’s
http://forum.xda-developers.com/showthread.php?t=860964
and a list of some Xap files here
http://forum.xda-developers.com/showthread.php?t=920845
Video
http://www.youtube.com/watch?v=Nac3Fnf-lY4
Watch this video if you are unsure what to do. Also the video doesn’t cover step 1 above which is needed. (HSPL2.08)
Additional Information
· Not all SD cards work well with WP7 and if you run into weird problem it might be that your SD card is not fully compatible with WP7. Try replacing it and see if it helps. It might be useful to read the following thread:
http://forum.xda-developers.com/showthread.php?t=914780
· Please make sure you read the HD2 Windows Phone 7 Q&A thread by mskip as a lot of valuable information is available in the links he provided.
http://forum.xda-developers.com/forumdisplay.php?f=987
Trouble Shooting
After step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all
· Make sure that HSPL2.08 is flashed or HSPL3 with 2.08 flashed
· Make sure you have the correct Radio installed by flashing the Radio again.
When Running DWI.exe it says error, USB Failed.
Try running as Administrator and read through http://forum.xda-developers.com/showthread.php?t=914026

I'll allow it seeing as how it helped me out ^>^

Thanks alot OMARZA
CrAzYiaN said:
There are threads about this already, Please don't make anymore.
Click to expand...
Click to collapse
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...

Tribulattifather said:
I'll allow it seeing as how it helped me out ^>^
Click to expand...
Click to collapse
Yes its a good thread, already sent a couple of newies there.

Thanks...I just thought seeing that so many people helped out with information I could give a bit back by trying to help others with some of the information consolidated in one place helping others.

Does radio 2.12.xx etc support 576RAM? Since this radio is somewhat best for battery life and reception in the UK i've heard?

Yes, I have used the 2.12.xx Radio as well and it should work fine.

Also after step 3, my phone is stuck on HTC logo, I cannot go into MALGDR at all :\?
Any help?

Try pulling out our USB cable and see if it gets past it. If not try reflashing Magldr...but USB cable still plugged in might stop you at the HTC screen while booting the phone...happened with me once. Let me know...

Still not working :\, I reflashed MAGLDR but it still stuck on HTC logo with white background. I tried removing usb etc as well. !!

Which Magldr did you use...and maybe try another radio. I used the 2.15 radio on installaton and after that flashed the 2.12 and then 2.14. Maybe see what happens if you use the 2.15 radio and flash magldr again after that.

Quick question...did you boot into Magldr by holding the power button down and keeping it in when powering up? Meaning...does that part work to get you into Magldr...

I could't get into MAGDLR at all. After it finishes flashing it gets stuck on HTC Logo. I took battery out waited 30 seconds, then tried going into MAGLDR but it goes straight into HTC Logo.
So far i've reflashed 2.15.xx, then flashed ROMUltility.exe etc and its still stuck on HTC Logo? Have I bricked my phone :O???
I used MAGLDR 1.13, the weird thing is that when I flash, it goes straight to 100% really quick, instead of getting stuck at 96% that you mentioned.
Please help me out xP
EDIT: Problem solved, I installed HSPL2 and flashed a 1.42. I needed to install HSPL3 and flash 2.08. My bad haha! Its all good now, downloading WP7 ROMs now ! mwhahahah

Great...glad you got it solved...was about to ask about HSPL

Finish window phone 7 on my htc hd2 !
Where do I activate my phone?

Might be...but before you call again...which ROM did you load?

omarza said:
Might be...but before you call again...which ROM did you load?
Click to expand...
Click to collapse
Twilight ROM?
I have not finished the SDK and Zune yet. I'll report back after !

Im currently downloading. But after reading some instruction, im stuck on the chevron jailbreak, I mean that the Twilight rom says its already have a devolper pre-installed? what should I do ?

colossus_r said:
Μ8...dont do that, and specialy to people that want to help others....
He did not ask a 1000times asked question..he just wrote a HowTo...
Another guide its not a bad post... its just a guide...
Please respect the time he spend on making this...
@omarza Thanks a lot m8...
Click to expand...
Click to collapse
your right, but seening as to their is alot of threads already about this i kinda get tired of seeing so many guides but your right. Credit is due. Nice guide tho.

MrPhilo said:
Finish window phone 7 on my htc hd2 !
Where do I activate my phone?
Click to expand...
Click to collapse
Call microsoft and ask them you need to activate your new windows phone, if they
ask you how you got it tell them you bought it off craigslist or ebay.

[Q] How can I boot WM 6.5 After Installing MAGLDR 1.13

It is said that you have to hold the power button to load MAGLDR after resetting the phone, but when I reset the phone it automatically boots to MAGLDR, instead of WM 6.5. Can you guys tell me how to access WM 6.5 from MAGLDR?

I forgot to mention that I always get this message before it boots to MAGLDR after resetting.
Rebooting Android from SD
Android loads at 11000000
From MicroSD
Load zIMAGE
K:\ zIMAGE
SD Kernal Open Failed.
Should I be concerned?
I haven't installed Android yet, but I'm in the process of installing Clockwork 1.3

I also tried to do a factory reset through MAGLDR, but it only goes back to the MAGLDR main screen. Help? Please?

First of all, use the "edit post" button to add text to the first post instead of making two new
Yesterday I got the exact same problem. Someone said that it is because the MAGLDR can't see the wrongly flashed ROM. However, I did not notice that it is something wrong with it.
What ROM do you have and which HSPL version ?
I had WinMo 1.46 stock and HSPL 2.08

my apologies.
stock? i'm using Radio 2.15 HSPL 2.08
did you correct your problem?
would it be safe to manually hard reset?

You can't boot Windows Mobile 6.5 if you have MAGLDR installed. But there is simply way back - just run RUU with stock 1.48 ROM on your PC, while having your HD2 connected to PC (phone has to be in bootloader, that rainbow screen).

I didn't correct my problem. I had to flash WinMo back from the SD card but the raven_raven's method is also possible.
So raven, why I can't boot into WinMo with MAGLDR? I've seen many people doing that by not keeping the power button pressed

From what I know, it's impossible to boot into WM6.5 if you have MAGLDR on your device. Its purpose is to load Linux kernel, not WM .

I'm kinda confused right now

If you flashed MAGLDR, why would you want to use WinMo? The main purpose of MAGLDR is to boot Android/WP7 on the NAND. It over-writes the WinMo you had on it before.
The error you're getting, you shouldn't be worried about it at all. All it is is that you haven't flashed a ROM yet. What do you mean you're in the process of flashing Clockwork? It's not hard... just flash the DFT file on your PC via the USB Flasher option and you'll have Clockwork. Then you install your .zip ROM, reboot and you won't get an error anymore as you'll have a ROM flashed.

Thanks for the help. It is greatly appreciated.
I can't access the USB Flasher. When I connect my phone to my PC, my SD card doesn't show up, instead, its recognized as an "unspecified" MAGLDR driver. I can't do anything with that.
But I can access my SD card through USB Mass Storage, but I don't want to install DFT on Mass Storage when I'm told to use USB Flasher. I don't want to do anything stupid

Abagnale said:
I'm kinda confused right now
Click to expand...
Click to collapse
yea i'm confused as hell. i'm seriously considering going back to 6.5, i didn't know the process was this frustrating.

SuicideFriday said:
Thanks for the help. It is greatly appreciated.
I can't access the USB Flasher. When I connect my phone to my PC, my SD card doesn't show up, instead, its recognized as an "unspecified" MAGLDR driver. I can't do anything with that.
But I can access my SD card through USB Mass Storage, but I don't want to install DFT on Mass Storage when I'm told to use USB Flasher. I don't want to do anything stupid
Click to expand...
Click to collapse
the usb flasher option is not to mount your sd card, it is just used to flash files/roms via daf.exe. use the usb flasher to install clockworkmod1.3, once that is done boot back into magldr and go to ad recovery, and recovery should start. from there you can mount as usb mass storage. i belive the one in magldr doesn't work very well, or at all for some, the one in clockwork always seems to work well for me.

guys its simple your not supposed to use MAGLDR if your going ot go back WM6.5.
tunr your phone off. hold the volume down button and press the power button, do not let go of the volume button, its going to bring you a tri colored screen. once your in that screen plug in your USB cable to the phone and to your computer. once that is doen flash a official WM6.5 rom let it do what it does,its going to restart and there you go back on WM6.5

there is no way you can boot Win 6.5 if you got MAGLDR, never seen it here
(unless someone shows a video or something)
the only way that can be achieved is to go into bootloader (tricolor screen)
and flash Win 6.5

I thought MAGLDR was for dualbooting. I wanted to go back to 6.5 in case I ran into any problems with the android builds Nontheless, I successfully installed Cyanogenmod, and it works perfectly. I dont think i'll be going back to 6.5.
Thanks for the help, it was greatly appreciated.

Hold volume down and power button when turning the phone on, it will get you into tree color screen...then plug your phone into pc .....on the of run rom installer for win 6.5 and after it is done you should be able to boot into win 6.5.
Sent from my Android Powered HD2 using XDA App

Hi guys!
I have the same problem.
my question is if I the official ROM is it going to erase/format the old one that I had?
The reason is that I did not backup everything and it would be nice if I could go back and get the rest of my contacts...
Is there any way of having a dual boot
BEWARE: complete noob!!!

skilimavro said:
Hi guys!
I have the same problem.
my question is if I the official ROM is it going to erase/format the old one that I had?
The reason is that I did not backup everything and it would be nice if I could go back and get the rest of my contacts...
Is there any way of having a dual boot
BEWARE: complete noob!!!
Click to expand...
Click to collapse
Are you honestly incapable of reading? What kind of complete MORON flashes something to their phone without a full knowledge of exactly what it will do?! If you install WinMo again you will have lost all of your data that is on the internal storage of your phone, and to be honest you deserve it if you are stupid enough to flash something without reading about what it does.
On a more positive note, you can flash NAND Android instead of reflashing WinMo if you want, using this guide. Since you would go ahead and flash this without reading up about it, I should probably warn you that IT WILL DELETE WINMO FROM YOUR PHONE! Is that clear enough for you?

Nigeldg said:
Are you honestly incapable of reading? What kind of complete MORON flashes something to their phone without a full knowledge of exactly what it will do?! If you install WinMo again you will have lost all of your data that is on the internal storage of your phone, and to be honest you deserve it if you are stupid enough to flash something without reading about what it does.
On a more positive note, you can flash NAND Android instead of reflashing WinMo if you want, using this guide. Since you would go ahead and flash this without reading up about it, I should probably warn you that IT WILL DELETE WINMO FROM YOUR PHONE! Is that clear enough for you?
Click to expand...
Click to collapse
Calm down. Experiance is everything. Share it, he just asked nicley.
But at least he now know that his contacts will never come back lol
Sent from my HTC HD2

[Q] HTC HD2 stuck on boot menu

I've already look through the other threads of users with the same issue, but none seem to have exactly the answer I'm looking for.
I was running windows phone 7 on my htc hd2, which was easy enough to do.
but yesterday I decided I wanted to put android back onto it, so I downloaded
Energy_2.8.2012.SensationXL from here. Followed all the steps in the thread, but now everytime I turn on the phone I get the error "NAND yaffs2 boot mount failed" and then just clicks straight over to the boot menu
so, as stated in http://forum.xda-developers.com/showthread.php?t=971268 I tried to "task29" the phone through the HD2 Toolkit app, and start again.
But all I get when trying to: task 29, update to/ install magldr 1.13 or clockwork, it just gives me an error [264] connection.
I'm unable to get onto the tri-coloured usb flashing screen that I used when I put WP7 on it, i've tried putting it in 'usb flasher' mode from the menu to no avail..
is there somehow a way to put the new ROM I downloaded ^^^^ onto the phone by switching it over to mass storage mode,
and then selectiong option 3: boot AD NAND?

how about return to WM,then try task29 and MAG or CLK

uyong said:
how about return to WM,then try task29 and MAG or CLK
Click to expand...
Click to collapse
I've always done the task29 and wiped it via HD2 Toolkit, but it's still stuck on the magldr boot menu
does the USB flasher option be the same at the bootloader (three-coloured screen) for flashing the new android rom?

If I simply loaded the android rom onto the SD card via an adapter, would that work if I went through the MAGLDR boot menu?
EG: 9: services, 1: boot settings, 1: boot source, 1: android from sd
..yes?
I'm at my wits end here guys!
I'm well aware of how to get into the three coloured bootloader screen, but the HD2 just wont do it!
I've done it numerous times before with this very handset from WM 6.5, then android (can't remember what version) , then WP7, and now it's decided to stop doing it when I want to go back to android, and the task29 has wiped it all, so I can't even simply revert back to WM6.5..
if someone could give me some step-by-step instructions on either a nand or SD android rom and the steps I need to take to get it working with that, bearing in mind the 'stuck on magldr' issue I have.
I can't remember if I stated it in my previous post but ever since I did the task 29, anything I try to do ie: update magldr to v1.13, update clockwork, or anything like that, it just give me an error saying it isn't connected via usb.
and now (started a few min ago) it isn't being recognised by the computer when I plug it in, even if i try and use 'mass storage' from the menu, whereas yesterday it was

julz1111 said:
If I simply loaded the android rom onto the SD card via an adapter, would that work if I went through the MAGLDR boot menu?
EG: 9: services, 1: boot settings, 1: boot source, 1: android from sd
..yes?
I'm at my wits end here guys!
I'm well aware of how to get into the three coloured bootloader screen, but the HD2 just wont do it!
I've done it numerous times before with this very handset from WM 6.5, then android (can't remember what version) , then WP7, and now it's decided to stop doing it when I want to go back to android, and the task29 has wiped it all, so I can't even simply revert back to WM6.5..
if someone could give me some step-by-step instructions on either a nand or SD android rom and the steps I need to take to get it working with that, bearing in mind the 'stuck on magldr' issue I have.
I can't remember if I stated it in my previous post but ever since I did the task 29, anything I try to do ie: update magldr to v1.13, update clockwork, or anything like that, it just give me an error saying it isn't connected via usb.
and now (started a few min ago) it isn't being recognised by the computer when I plug it in, even if i try and use 'mass storage' from the menu, whereas yesterday it was
Click to expand...
Click to collapse
Try flashing it back to window 6.5.... nbh.img?
Sent from my LG-P999 using xda premium

Yes, I agree with the others.
When I try a new ROM and it fails for some reason or another, I always just go back to win6.5 (http://forum.xda-developers.com/showthread.php?t=623283) and start over.
A bit of a hassle, but have found this to be the most reliable way so far.

how can I flash it back to 6.5 if I cant get to the bootloader/ when it doesn't recognise the phone when it's plugged in

julz1111 said:
how can I flash it back to 6.5 if I cant get to the bootloader/ when it doesn't recognise the phone when it's plugged in
Click to expand...
Click to collapse
When flash back to 6.5... you don't need a computer. All you need is an SD card. Download the correct file that matches to your country... extract the file... pull out the nbh file and rename it leo... then place it on the root of your SD... then boot.
This is a short run down of how to get it back to stock. Search a little... cause I know there is a thread that tells you how to do it in detail... plus it have all the files that you'll need.
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
Sent from my LG-P999 using xda premium