Database Users

After MAGLDR 1.13 doesn't boot!

Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!

Jigsaw8989 said:
Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!
Click to expand...
Click to collapse
did you use HSPL before it ??

i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?

Jigsaw8989 said:
i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?
Click to expand...
Click to collapse
do you have HardSPL 2.08 ??? because in magldr thread it is written as required

1. Wrong section -> There's a Magldr topic, search for it.
2. First read, then act?
Have you installed a rom yet? Does the phone boot to Magldr? A little more info is useful..
Booting into bootloader via: turn on the phone, hold volume down key while booting
Booting into Magldr: turn on the phone and keep the power button pressed down untill Magldr comes up.

Not sure...
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...

Jigsaw8989 said:
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...
Click to expand...
Click to collapse
Can you get to 3 color screen where it writes hspl version etc. ?? if yes try to install HSPL 2.08 and then the magldr

I have got 1.42. (i think that the problem! Im able to get in the boot loader but not to MAGLDR . I dont hava a NAND version of andird on my phone but i have got a Windows moble rom on it. Is there a possiblity to bot the WM throgh the bootloader that would be all i need!

im able to get in the bootloader (3 colourd screen) but how should I be able to install a new HSPL without a connection to my Mobile device center?

Do it within this way:
1. Make sure you have HSPL 2.08 installed
2. Install TASK29. If you need it search for this.
3. Install "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe" on your device. Do some settings within Windows and SHUTDOWN!!!
4. Press VOL-Down and press POWER ON until you will see the flash boot screen.
5. Now install MAGLDR 1.13 (v. 250MB Edition)
6. IF THIS FAILS - install Windows AGAIN and after all install MAGLDR 1.13 WITHOUT Task29.
Yesterday I have done a complete reset. Installed my O2 firmware and replaced my original bootblock. After all I have had the same problem that MAGLDR won't install on this device. I have tried it with 1.12 and 1.13. NOTHING, device boot until the WHITE HTC logo and nothing more. But ANDROID was installed bevore.
After that procedure I was able to flash MAGLDR 1.13 again.

thanks for your help imm try to do anything you have told me! I flashed HSPL 2.08 and Magldr also started. Thankl so much for your Help. Now i will try to install DiserZ andrid rom!

How is it possible to boot windows with MAGLDR? and how is it possible to remove MAGLDR?

If you want boot WINDOWS ONLY: you don't need MAGLDR.
If you want to delete MAGLDR: just use Task29 ROM.
If you want restore all to default:
1. Download your ORIGINAL ROM from your Provider or HTC.
2. Use 7zip and unpack the EXE file.
3. Search the file "RUU_signed.nbh" and rename it to "leoimg.nbh".
4. Format your SD Card with FAT32 format
5. Copy the "leoimg.nbh" to the SDCARD.
6. Insert Card into your device.
Now search the RESET button right next to the SDCARD slot on the back of your device:
7. Press the RESET button AND VOL-Down and when you see within the display "LOADING..." RELEASE both immediately and follow the instructions on the screen. It might be that you need 2 or 3 times until you got it
!!!! EVERYTHING !!! on your device will be erased after all. If you get an error that you are not able to flash "...bla, bla, bla..." don't cry - just download your OFFICIAL ROM by device serial number on the HTC website.
Unpack this EXE (again), rename the *.nb0 file and just do it again.

[Q] Installation DFT MAGLDR Bootloader 1.13 - PROBLEM

I have a problem with DFT MAGLDR Bootloader 1.13 version. I have HSPL 2.08 version and radio 2.15.50.14 version. I connect my HD2 and synchronize it with my computer but when I run ROMUpdateUtility the device is restarting and the progress bar is on 0% all the time. After about 30 minute the ERROR 262 appears on the screen. But the connection 'HD2->My Computer' is correct. Do you have any idea what the problem is ? Please help me.....
miod3k

Also are you right clicking the RUU and selecting run as adminastrator?

Also are you right clicking the RUU and selecting run as adminastrator?
Click to expand...
Click to collapse
Yes I do this, but it's no take effect.
HELP!!!!!

miod3k said:
Yes I do this, but it's no take effect.
HELP!!!!!
Click to expand...
Click to collapse
Hey, try re-downloading MAGLDR and connecting via another usb port or preferably another system with htc drivers installed...Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?

If you are still having trouble click on the link in my signature that says guide and it tells you step by step how to flash MAGLDR by flashing via bootloader. Also like the post above said try all the USB ports if you have trouble with one.

Hey, try re-downloading MAGLDR and connecting via another usb port
Click to expand...
Click to collapse
I do this but it's no take effect.
Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?
Click to expand...
Click to collapse
It's USB
You can also flash MAGLDR via SD card just like you can a Windows Mobile ROM. Just copy the magldr.nbh file and change the magldr.nbh file name to leoimg.nbh then copy the leoimag.nbh file to the root of your SD card. Boot your HD2 into bootloader and press the end button to comfirm when it ask if you want to flash the image.
Click to expand...
Click to collapse
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?

miod3k said:
I do this but it's no take effect.
It's USB
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?
Click to expand...
Click to collapse
Here r d steps and it has worked countless times...
1. U must have performed a HSPL 2.08 (not 3.03) using HSPL3/4 software. (connect usb & restart in bootloader mode)
2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
3. Flash MAGLDR 1.13 by powering up in bootloader, connecting usb and running "RUU.exe" as Admin.
Going CWM Way?
4. Flash CWM by launching MAGLDR (Press & hold down d end key), using volume keys, scroll down & select usb flasher...Run "Daf.exe" contained in CWM folder.
5. Copy android build to root of already full-formatted sd card.
6. Enter MAGLDR mode & scroll down to AD Recovery..Enter....CWM should load up.
7. Select "Install zip from sd card".
8. Select d desired build...Enter..Scroll down to Yes, Install.....
9. Flash Away.
10. Wait for successful confirmation then select "reboot phone" ..
ENJOY!!!

2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
Click to expand...
Click to collapse
I try do this, but after I run task29.exe I have this image on ma screen
And the progress bar was no changes(all the time is 0%). I must remove battery and put it into my HD2 again to run operating system.
Please help!!! :-(

It works!!!! I reinstall HSPL downloaded from another source and MAGLDR was install without any problem.
Thanks all of you for help....
Greetings
miod3k

problem with installation
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...

schnatterinchen said:
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...
Click to expand...
Click to collapse
change the HSPL to 2.08, it will not work with 3.03

but my device doesn't start ... when I push the power button, it hangs up so I couldn't connect it to my pc ...

take the battery out for 30 minutes and then try getting into the boot loader

how can I get into the boot loader? ...

schnatterinchen said:
how can I get into the boot loader? ...
Click to expand...
Click to collapse
hold down the volume key as per instructions when you originally flashed

Remove the cable from your device
try to to open ActivSync settings
and uncheck accept usb connection or something like that ...
reconnect your device again the try flash MAGDLR
i think it wil work for you

thx anyway ... but it won't work ... when I push the powerbutton, my device is vibrating like when it starts normally ... about one second later the tmo logo is fading up and then the diplay is freezing ... there is no other reaction ...

need help
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these (
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15

Struggling to downgrade WP7, Please help!!!

I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000

Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.

GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??

rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...

ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks

flash hspl ... radio ... then mag ... then try the downgrade to winmo

rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!

I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.

GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?

No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!

GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck

Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next

task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks

Sounds like nand is dead. Looks as if you will have to return it to get it fixed!

i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!

GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......

know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?

anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks

Depends how old it is. It may need to go directly to HTC to get it fixed.

I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...

[Q] HTC HD2 bricked, can load bootloader cant install any ROM

HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.

to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....

thanks for quick reply
I am trying to do what you instructed me.

Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.

I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.

Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium

The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...

leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!

freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills

Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks

First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse

If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...

Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.

I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?

[Q] White screen without HTC and impossible to launch any soft

Hello everybody,
i am trying to install android and i have a lot a problem.
First of all, the phone belonged to my bro. One year ago, he wanted to install android but he failed and he bought an other phone. Because it's a good phone, i have decided to do it but it's not very easy....
The phone: white screen without HTC logo, hspl 2.08spl installed
My pc: W7 /usb ok
What i tried:
- change the hspl version : i tried to install an other version, just to try the soft and it was written on the screen that it's a success but nothing change on the version. I mean, i tried to install the 3.03 version but the version stay on 2.08spl even if the message is a success.
- lauch Task29: it's not working. I have a msg error
- install a rom: same problem
I dont remember exactly which error message it was. One was due to a communication error and the other because of the corruption of the imag(error 276).
Do you have an idea?

kam10 said:
Hello everybody,
i am trying to install android and i have a lot a problem.
First of all, the phone belonged to my bro. One year ago, he wanted to install android but he failed and he bought an other phone. Because it's a good phone, i have decided to do it but it's not very easy....
The phone: white screen without HTC logo, hspl 2.08spl installed
My pc: W7 /usb ok
What i tried:
- change the hspl version : i tried to install an other version, just to try the soft and it was written on the screen that it's a success but nothing change on the version. I mean, i tried to install the 3.03 version but the version stay on 2.08spl even if the message is a success.
- lauch Task29: it's not working. I have a msg error
- install a rom: same problem
I dont remember exactly which error message it was. One was due to a communication error and the other because of the corruption of the imag(error 276).
Do you have an idea?
Click to expand...
Click to collapse
My advice is for you to start over from scratch turkey...put the device in bootloader mode and run the AIO HD2 Toolkit and perform a Task 29; once done, put the device in bootloader mode again and run MAGLDR. If you're dead in the water at either of these...get drunk and sing to your cat!

berrywr said:
My advice is for you to start over from scratch turkey...put the device in bootloader mode and run the AIO HD2 Toolkit and perform a Task 29; once done, put the device in bootloader mode again and run MAGLDR. If you're dead in the water at either of these...get drunk and sing to your cat!
Click to expand...
Click to collapse
Like U said I run the AIO HD2 TOolkit and perform a task 29 but I have an error 286 The Nand Flasher Utility has encountered communication errors during the update process...)

Install last HtcSync version
After
If in the bootloader you read on the second line you can read SPL-2.08.HSPL
flash a radio Rom (2.12 or 2.15)
Try to install Clk 1.5.x (Leoimg.nbh on sd card root, you have to start your hd2 with power + vol- at the same time and follow the instructions)
After you can enter in Clk (power + arrow touch) , settings, resize system partition, and after go to recovery to partition your sdcard and install the zip of the rom of your choice....

bzhmobile said:
Install last HtcSync version
After
If in the bootloader you read on the second line you can read SPL-2.08.HSPL
flash a radio Rom (2.12 or 2.15)
Try to install Clk 1.5.x (Leoimg.nbh on sd card root, you have to start your hd2 with power + vol- at the same time and follow the instructions)
After you can enter in Clk (power + arrow touch) , settings, resize system partition, and after go to recovery to partition your sdcard and install the zip of the rom of your choice....
Click to expand...
Click to collapse
I installed the last HTCSync, I checked again my bootloader, and it's the 2.08 HSPL.
I try to flash a radio rom but it failed (ERROR 270- update error: the image file is corrupted.). I try again and it failed again but with an other error message(ERROR 286-update error: the ROM Update Utility has encountered communication errors during the update process).
May I have to try to install Clk or it's not neccessary because I don't have a sd card?

the easiest way is with a SdCard, but it's possible with Hd2 Toolkit ...

bzhmobile said:
the easiest way is with a SdCard, but it's possible with Hd2 Toolkit ...
Click to expand...
Click to collapse
It found a sd card. I will try with this method.

:good:

Nothing working... Still the same message error...

Is my phone dead? Someone can help me? Pleeeeeaaaaaase!!!!!!!!!!!!!!!!!

download stock windows mobile rom. if it's an eu hd2, download an international rom. if it's tmous (tmobile usa), download its' rom.
What i mean is to download the corresponding rom to your device. be sure not to flash the wrong one.
before you start, download hspl4 package from here
run it on your computer, and install 2.08 HSPL (i know you have it, reinstall it)
next run the ruu executable you downloaded (the windows mobile rom i told you to download)
if it flashes, you can flash magldr and try. try AFTER you flash windows mobile, and a RADIO (suggesting 2.15)
if that doesn't work, extract the nbh from the executable, install SPL3.03 , rename nbh to LEOIMG.nbh , in capital letters, put it on your sd<= 4gb
turn phone in bootloader, you should be able to flash the rom. after flashing it reflash hspl and magldr

bro..download windows mobile device center software..Install it on your PC..Then install hd2 toolkit. switch off your hd2. Press volume down and power button until it shows 3 coloured screen.then install hspl,repeat the step and then install magldr,then let it boot up. then select the usb flasher on magldr,repartition according the rom that you want to install.

Hello everybody, I tried your 2 last advices but nothing works. Any idea?

Read this:
http://forum.xda-developers.com/showthread.php?t=1251641
Don't have Sd card and sim card inserted while trying to fix it.
Try on other pc with windows, htc sync and windows Mobile device center installed.
Next thing, are you sure that you have HSPL and not SPL installed, its not same thing and task29 will not work.
Sent from my HD2 using xda premium

Thank you. I will try.