Database Users

After MAGLDR 1.13 doesn't boot!

Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!

Jigsaw8989 said:
Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!
Click to expand...
Click to collapse
did you use HSPL before it ??

i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?

Jigsaw8989 said:
i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?
Click to expand...
Click to collapse
do you have HardSPL 2.08 ??? because in magldr thread it is written as required

1. Wrong section -> There's a Magldr topic, search for it.
2. First read, then act?
Have you installed a rom yet? Does the phone boot to Magldr? A little more info is useful..
Booting into bootloader via: turn on the phone, hold volume down key while booting
Booting into Magldr: turn on the phone and keep the power button pressed down untill Magldr comes up.

Not sure...
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...

Jigsaw8989 said:
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...
Click to expand...
Click to collapse
Can you get to 3 color screen where it writes hspl version etc. ?? if yes try to install HSPL 2.08 and then the magldr

I have got 1.42. (i think that the problem! Im able to get in the boot loader but not to MAGLDR . I dont hava a NAND version of andird on my phone but i have got a Windows moble rom on it. Is there a possiblity to bot the WM throgh the bootloader that would be all i need!

im able to get in the bootloader (3 colourd screen) but how should I be able to install a new HSPL without a connection to my Mobile device center?

Do it within this way:
1. Make sure you have HSPL 2.08 installed
2. Install TASK29. If you need it search for this.
3. Install "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe" on your device. Do some settings within Windows and SHUTDOWN!!!
4. Press VOL-Down and press POWER ON until you will see the flash boot screen.
5. Now install MAGLDR 1.13 (v. 250MB Edition)
6. IF THIS FAILS - install Windows AGAIN and after all install MAGLDR 1.13 WITHOUT Task29.
Yesterday I have done a complete reset. Installed my O2 firmware and replaced my original bootblock. After all I have had the same problem that MAGLDR won't install on this device. I have tried it with 1.12 and 1.13. NOTHING, device boot until the WHITE HTC logo and nothing more. But ANDROID was installed bevore.
After that procedure I was able to flash MAGLDR 1.13 again.

thanks for your help imm try to do anything you have told me! I flashed HSPL 2.08 and Magldr also started. Thankl so much for your Help. Now i will try to install DiserZ andrid rom!

How is it possible to boot windows with MAGLDR? and how is it possible to remove MAGLDR?

If you want boot WINDOWS ONLY: you don't need MAGLDR.
If you want to delete MAGLDR: just use Task29 ROM.
If you want restore all to default:
1. Download your ORIGINAL ROM from your Provider or HTC.
2. Use 7zip and unpack the EXE file.
3. Search the file "RUU_signed.nbh" and rename it to "leoimg.nbh".
4. Format your SD Card with FAT32 format
5. Copy the "leoimg.nbh" to the SDCARD.
6. Insert Card into your device.
Now search the RESET button right next to the SDCARD slot on the back of your device:
7. Press the RESET button AND VOL-Down and when you see within the display "LOADING..." RELEASE both immediately and follow the instructions on the screen. It might be that you need 2 or 3 times until you got it
!!!! EVERYTHING !!! on your device will be erased after all. If you get an error that you are not able to flash "...bla, bla, bla..." don't cry - just download your OFFICIAL ROM by device serial number on the HTC website.
Unpack this EXE (again), rename the *.nb0 file and just do it again.

Bricked or?

Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?

Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App

froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.

froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.

thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?

froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2

Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated

Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.

It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......

orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???

froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.

[Q] HTC HD2 bricked, can load bootloader cant install any ROM

HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.

to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....

thanks for quick reply
I am trying to do what you instructed me.

Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.

I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.

Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium

The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...

leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!

freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills

Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks

First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse

If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...

Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.

I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?

Rom not booting, only magldr, need to get back to stock

Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!

irteza_h said:
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from the SD card? The procedure is outlined here, it doesn't seem too hard. Since you can't connect in MAGLDR use an SD card reader to copy the stuff across.

why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok

clio94 said:
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
Click to expand...
Click to collapse
I tried to go to recovery AD ... It says that boot sources could not be found..

irteza_h said:
I tried to go to recovery AD ... It says that boot sources could not be found..
Click to expand...
Click to collapse
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.

Nigeldg said:
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Click to expand...
Click to collapse
I was trying to use the USB Flasher earlier and the installation would fail halfway through with various errors.. Tried with 4 different roms.. So decided to do a stock rom from sdcard .. tried a WWE and got an error 28002...couldnt get into magldr even now... Anyways got Task29 ..booted in the red yellow green screen and doing a wipe+hspl+magldr+recovery. As of now it stuck on 0% at the wipe process but it does say 10 minutes for flashing and its been only 2. Lets see.....

Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??

irteza_h said:
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
Click to expand...
Click to collapse
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.

The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.

Nigeldg said:
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
Click to expand...
Click to collapse
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
Daycrawler said:
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Click to expand...
Click to collapse
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....

irteza_h said:
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
Click to expand...
Click to collapse
Yeah don't use the HD2 toolkit, go to the HSPL thread and download the HSPL4 package from there. Just select HSPL2.08 and flash it. The toolkit uses the older HSPL3 package if I'm not mistaken.

HD2 bricked!! Need urgent help from anyone!!!

Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!

back to winmo use sd card method..

If you can enter in bootloader (with color band) VOL.DOWN + POWER
plub usb to pc and flash a stok rom

I tried this with several Official Roms but no one function..
still hang on 0 % or get a Errormessage on 1% that Image is corrupt over USB
and over SD every try hang with "Errormessage 18003 and Radio_V2 - Fail
LEOIMG.nbh - FAIL
Update Terminate
UPDATE FAIL

You didn't brick it man. Just flash CLK or MAGLDR.

I tried DFT_LEO_MAGLDR113_DAF and it gone 100% but after it I got the Error [270] File is Corrupt over USB.
Try to install MAGLDR over HD2 Toolkit, but hang on 0 %
Try to install CLW over HD2 Toolkit, it gone 100% but after it I got the Error [270] File is Corrupt
Try to install MAGLDR over SD with renameing magdlr.nbh to leoimg.nbh
Update Success but still white screen.. try to open phone with holding power key to enter magdlr menu no sucess - still white screen

You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan

First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)

NLsalvador said:
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
Click to expand...
Click to collapse
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR

m4gnum87 said:
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
Click to expand...
Click to collapse
trying it on other computer with a good cable.maybe it's your laptop has something wrong.

try the goldcard method (you cannot generate it for free anymore, but you can google for a good one searching the CID for your sd, try several sd until you will find an sd with a know CID and a goldcard image ready to download for your CID) [try with sandisk/kingstone 2gb, goldcard is not supported with SDHC like 16gb one], and flash from sd in bootloader the nbh image extracted from wwe RUU (you will find *.nbh image under temp folders when you run *RUU*.exe)
maybe with goldcard you can force radio flashing
also try mtty and some tasks (like 2a if i remember well) that try to repair your bad blocks
if you can't solve with these 2 method, sell it on ebay and buy a new one for the same price

The official roms can be extracted with winrar, extract it and copy RUU_signed.nbh to the root of your sd card. Insert the sd and boot it holding volume down and when entered bootloader press volume up. Now it should put it back to WinMo. Then Flash HSPL and Magldr.

m4gnum87 said:
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=668347

ph03n!x said:
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
Click to expand...
Click to collapse
i tried as you told with reinstalling the drivers for WMDC and redownloading all other things but still the same s... I think the problem is the 2.08.SPL i cant change it or delete it.. or maybe a cache of anything is bricked so he hang on 0% or 1 %... i dont know im so frusted

look at my post, try goldcard method, should force flash process

pirlano said:
look at my post, try goldcard method, should force flash process
Click to expand...
Click to collapse
how i can go over the gold card method if my hd2 is not running? i see in the tutorial that i must get to storage mode and get the SD Cards Serial number..???

jak11 said:
Try this http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
The Rom is still no more avaiable to download and if start mtty i have no selection for USB :S

still not solved, i can guide you through skype it will be easier

Task29 ve HSPL 3 araçlarını tekrar indir. Belki sorun onlardadır.
Download Task29 and HSPL 3 again, the problem may belong them.

nphaibk said:
still not solved, i can guide you through skype it will be easier
Click to expand...
Click to collapse
for sure i will be avaible in 3 hours if you want?