Related
Hello,
because my posting in this forum wasn'n answered i tried to fix together with Mr. Wolf from Wolfsoft (www.wolfsoft.de - also great for fast XDA RAM-Upgrades) with the informations i found.
Everytime i write the i did something - i mean - we did it! We worked hard together for this solution.
-----------------
First:
Maybe, surely you can destroy you XDA-ROM more than it was destroyed before. I not guarrante or take responibility for any errors or damages occuring while trying the next steps.
Situation:
I upgraded my german O2-XDA in the wrong way. After this I had the following problem:
- The O2-bubbles appearing after soft- or hard resetting the XDA are displayed for 3 or 4 minutes. In the right bottom corner of the display the Version of WinCE ist dissplayed (3.14), after some times someting more was shown but that seemes to be from a crashed source.
- After the "pling" a white screen with a blue bar on the top is displayed. The screen-light doensn't turn off. Nothing more happened, after 20 or 30 Minutes the XDA performs a soft reset automatically - after this the same problems occuring
Requrements I needed to fix my problem:
- 1 (better 2 SD-Cards with minimum 32MB Capacity)
- XDA Cradle connected to the PC and Power
- in some cases 1 Charging cable (USB or Power) with a connector for the XDA
- The Program A and Program B - Files provided by german O2 website
- The repair.zip-File provided by XDA-Developers
- A second XDA or a SD-Card-Reader connected with your PC
- many time
- Your XDA must have a working bootloader (mine was Version 5.15), try it by holding the Power-button while performing a soft-reset.
What I did:
- After entering the Wallaby-Bootloader an "gsm-error" - message appears after 1 minute of "wait"
- I entered the SD-Card-Menu by pressing the Contacts-Button on the left-top of the XDA
- I choosed Write CE to SD in order to save my original CE in order to avoid unuseful Questions in case of repair-fail by O2-Support
- After this I performed a soft reset an waited for 1 or 2 Minutes after the white screen appeared
- While tis time write the contents of the unzipped repair.zip to the SD-Card using the SD-Card-Reader or the second XDA
- Now i pressed the "Volume" - Button on the left side for many times, after some trys (if it is not working perform a soft reset and try new) I saw a non-working Today-Screen
- Now insert the SD-Card on you have written the files from repair.zip
- There are 2 possibel reactions:
First: You get a message to format your SD - DO NOT!!!! In this case remove your SD-Card, connect your XDA with the Charging Cable and perform a soft reset. It is okay that there is no charging light. After you entered the Today-Screen insert the SD - do not remove the Charging-Cable! Then it will work.
Second: Installing beginns without any problems
Now your Radio Stack-Module will beginn to be updated. In my case I got the 1% Error discussed in the forum.
- Remove the Power cable, connect your cradle with the PC and the Power, perform a soft reset and wait what is happening. After the error occurs don't push the ok-button. Simply press the start-tab (or anywhere other excluding the message). Now take the XDA out of the cradle and after this put it in again, still with the error message on the screen. Now an active sync connection will be shown on both, your XDA and the PC! If you have this case, it looks good.
- If this doesn't work, replace the RSUpgrade.sa.cab-File from the repair.zip with the same named File, whats included in the program_B.exe (extract first, you will find the result in <Harddisk-Device:\Programme\Programm B) and writhe both on your SD
- Soft reset the XDA, ignore all errors, do not put the new written SD-Card in - open the Active sync-connection and delete the both newest files in the Windows-Directory of your XDA. If you can't delete, rename the file. After this perform a new soft reset.
- You will get a "file not found error". Try to temove and insert your XDA in the cradle to get an active sync-cennection. If this doesn't work insert the new written SD
- Try new flashing again again, maybe it works. If not try to push on the screen and remove and reinsert your XDA in the cradle to get a Connection.
- If there is no possibility to get a connection - i do not know any futher solutions - sorry.
If you get the connection, perform the normal Flashing with Program A provided by your Provider. After this is successfully completed you will see the loading-LED again! Congratulations!
If this is completed charge your Battery to at least 70% - be patient, it will take up to 1 Hour!
After this perform Programm B provided by your Provider. If this successfully completes - Congratulations - you are up and running!
I don't know, if I had happy circumstances, but this worked to gat my working XDA back!
If it do not work, use the first SD-Card containing your old CE to copy back your old ROM in order to not loose your support by your Provider. Simply insert the card into your XDA and perform a soft-reset while holding the Power-Button. Everything looks broken but original!
Please feedback in the XDA-Forum-Thread, if it worked at your XDA or if you have any hints for improvements this steps. Thank you!
Best regards from Berlin/Germany to all XDA-Fans like I am!
Miwu
Very detail.....thanks a lot ! :lol:
Tried your solution but i don't know which files i should delete cause when i delete the latest two files i get no error message...
When trying to install Programm a anywway i get a Connect Power Message and the installation stops.
Edit:
I managed to get the file not found error by renaming the RsUpgrade executable but still get the Power Adapter not plugged in Error...
So it would be very important to know which Programm A you used.
Hello,
@ianrush
Have you been able to get an active sync connection as I described?
You have to delete the file causing the Radio-Stack-Update after restart, I think they are located in the Windows directory of your XDA. If you let your XDA order the files by date the 2 newest files are the ones for updating the Radio Stack and causing the 1%-error. In deleting these files you can get your XDA booting without starting the gsm and getting the Active-Sync-connection. To break up the Installation you must delete these files (i remenber that on (the one that must be renamed) was only 35k or in this area, the other one was much larger).
After deleting and restarting by soft reset you don´t get the 1%-error-message, but another one like "The file can´t be found). But if you see this message (do not press okay!!!!!) you can use your Active-Sync-Connection to flash with Programm A and after this programm B.
The files (germen version) are located here.
Klick at the link "Download Software-Update" and accept the conditions by clicking "Akzeptieren". After this a new window is displayed for downloading the Software. The versions are:
CE: Version 3.19.01 -
Radio Stack Version 4.21
"Teil 1" means Programm A
"Teil 2" means Programm B.
Remember, it is the german version with some german specials like the "Homezone". But you can turn it off and while I see, that you are from Austria, I think you won´t have any problem with the language...
Isn´t it very strange, that 2 german speaking people trying find solutions in english??? :?
Best regards from Berlin!
Michael
I have no problem starting an Active Sync Connection, my problem is, that i get this odd Error Message which tells me to plug in the Power Adapter, which is obviously connected...
There is a much easier way of getting rid of the Flash Prog bei simply deleting the RsUpgrade link in the Auto Start Folder in the wwindows directory and its also possible to start an Connection via AS.
My real problem is the battery charge check before the real flashing of the RSU.
I tried it with the mentioned O2 files and also with Tmobile.at/de files.
A solution may be to "crack" the installation file or to write a small prog wich tells PPC that the battery is chraged.
Many thanks for your help, but it didnt solve the problem for me.
PS: Well its an English Forum so i think we should stay in that language
Oh, I forgot to write that one.
The charging light, wich may be an indicator for the XDA-OS for the supplied Power came back as we installed the O2 Radio Stack via the Active Sync-Connection bevor performing Programm A - Upgrade. Try to perform Program B - Update first, in our case we got our lovely orange light back and then performed the Programm A and Programm B - Update again!
Regards again!
Michael
Didn't work for me either.
The BIG question is how the hell did you get your XDA charging his battery again ? I believe that this will help many people to get their 1% Flash failed problem solved.
Hi !
I will try this method tomorrow.
Sebi
Hello,
I do not know why, but after (failed) installing Programm B after connecting via Active Sync first it worked . Maybe because of the working version-combination of Radio Stack and CE.
Regards
Miwu
@Sebi Please post if it is working!
Hi !
Don't work for me.
My problem is same this:
Posted: Fri Aug 29, 2003 19:26 Post subject:
--------------------------------------------------------------------------------
I have no problem starting an Active Sync Connection, my problem is, that i get this odd Error Message which tells me to plug in the Power Adapter, which is obviously connected...
Click to expand...
Click to collapse
Best regards
Sebi
miwu
I followed your steps and got the following message on my device:
The file "\Windows\RSUpgrade.exe" is in use or is in ROM. If the file is not in ROM, please close the application using the file.
Please advise
Anaq8i,
if this messege appears then rename the file "\Windows\RSUpgrade.exe" with an new name like "\Windows\RSUpgrade_used.exe" restart the device and follow the further instructions.
Hope that helps
Regards
Michael
miwu,
I cannot rename it, nor can I delete it, I think because it is in ROM. Please keep in mide that the I have not closed the error message after the 1% halt.
I reached the point were I can access my device and can sync with my PC. If I try the Programme A install, I get the message " WARNING 001: POWER ADAPTER NOT PLUGGED IN, Please plug the power adapter into your Pocket PC". Every time I try the RSU upgrade I get the 1 % error. Any suggestions will be appreciated
Hi anaq8i,
please try to rename the file by using the Active-Sync-Connection an the Explorer of your big Desktop-PC. The file cannot be in the rom, it is located in the ram of your device in order to get deleted after upgrading. Try to rename the file this way, then perform a soft-reset (not a hard one) then you will get an error-message that sonds like "the file ... cannot be fount", then put your device in the crade for active sync and try to install the original Programm B of your Provider (not the file from repair.zip). That worked at my XDA.
Please answer how it worked.
Regards this time from Hamburg/Germany
Michael
thanx a lot, have the same error, now all worx fine!
czeky thanks for answer. I am glad that my description was helpful Doe it work for other users?
@ czeky
would you also please be so kind and tell us if u tried any other steps than mentioned by miwu ?
If i treally worked with your XDA there you must have done something different then anaq8i, Sebi and i did...
miwu
I reached the point that I can boot my XDA and can sync with my PC. But I still cannot install /upgrade the RSU software, I still get the 1% error. If I try to install Porgramme A, I get the "POWER ADAPTER NOT PLUGGED IN" error message. I never reached the orange light stage on the XDA.
Anything else I should do?
@anaq81
Did you try to rename the described file via Active Sync? I posted it some day ago ...
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Sell your Toshiba, and buy a HTC.
xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Hi,
I don't know what you can do replacing such files, ( I think you must first make a dump of the rom, reconstruct it with the new files and then repack an flash again ) anyway you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site... search with google for that if you don't have the link, I don't remember it now...
Really hope this help
Do you try to do a hardreset?
Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
As for the files themselves, you'll just have to hope someone sends them to you
a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again
Hey guys, thank You for Your help. Never expected this resonance after the first reply
@[email protected]
you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site...
Click to expand...
Click to collapse
just extracted it from WM5, but complete crash after replace
@THEVK
Do you try to do a hardreset?
Click to expand...
Click to collapse
a few times with no success
@Aquilo
Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
Click to expand...
Click to collapse
just replaced the files with pput, but after soft reset complete crash of the phone.
@dandycheung
a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again
Click to expand...
Click to collapse
after a hardreset just installed tomtom -> crash
TomTom 5.21 / 5.20 both worked on my old xda graphite with WM5 but with another AKU version, i think 2.xx (don'T know bc. it's in the cellphone-heaven)
Don't know further, i have no ideas, maybe you guys
sell this and DO NOT buy htc!
gwes.exe is device dependant, so your phone wil never work with another device's version.
gwes.exe is device dependant, so your phone wil never work with another device's version.
Click to expand...
Click to collapse
no. it's device independent, but can have different components.
Also you can't replace it directly.
just extracted it from WM5, but complete crash after replace
Click to expand...
Click to collapse
it contains relocations. Do you fix it?
Also it must be signed.
Maybe this is interesting for someone:
left software button + power on
RUU update!
Waiting USB Connection ......
connecting usb cable
Updating
Receive call + power on
Factory update!
udc_enable
usb connect
Error occured, usbdev ep0 stalled!
and on Windows -> Driver installer -> TFW USB Download DR/V -> no driver found
(1 + power on) or (vol + power on)
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: Get MAC address yyyy,yyyy,yyyy
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
usb connection + 1 + battery connect
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: PDDInit Success!
Rndis:: Get MAC address XXXX,XXXX,XXXX
xxxx -> maybe device specific numbers
.
.
and on Windows -> Driver installer -> Microsoft RNDIS KITL for Intel PXA27x no driver found
.
.
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
4 + power on
KITL Enable...
Cellphone remains in "Toshiba Startscreen"
* + power on
SDCard update!
.
.
TFW Windows Mobile PDA SW DOwnload!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
with MiniSD Card in slot:
* + power on
SDCard update!
Sectors per cluster: 32
First FAT Sector: 98
FatSectors: 31
First Dir sector: 160
First Data Sect : 192
Root DIR Entry Count: 512
...Dirctoy listing...
Search root dir fail!
fat search sector: Fail (fat_locate)
Find file fail!
Open file Error
Upgrade Fail!
0 + power on
------------------------
Xloader Version: MDOC4(mcp25) V1.00
Eboot Version: Eboot-1.02-00
(1) Download with USB_RNDIS
(2) Boot from IPL KITL enable
(3) Boot from IPL KITL disable (default)
(4) Test Key Value
(5) Test Memory
(6) Run ULDR. default FALSE
(7) Clean Reboot
(8) Abnormal Reboot
(9) Goto Sleep
----------from oallog------------
-----------------------------
Enter your selection:
This is your bootloader menu. All devices have some version of it.
Though all manufacturers put an option to upgrade in to their devices (just in case and for internal test purposes) few bother actually releasing updates.
There is no way to just replace gwes.exe and have the system working. What you need is a whole new ROM, so unless you can find someone cooking one I guess you are out of luck.
Thanks levenum,
i agree, there is no way just replacing it.
Just spoke to Toshiba support.
I asked for a hardware reset -> he searched and searched -> and told me "on this phone no way to do a hardware reset"
I ask myself WHO is working on toshiba support?
Why couldn't he say: press "0" + power on and then press 7
Does somebody know how to backup the rom e.g. on sd-card.
Flashing from sd card is possible with * + power on, but i don't know the filename the phone is requiring, and dont have one. Maybe after rom-dump the file will be known.
Toshiba also upgrades the G900 modell only by sending it in. There is no rom-update on the net. Maybe if someone tries (and knows) to backup the G900 rom maybe there is a chance to kook to WM6 for the G500.
Toshiba G500 Call outgoing problem
Toshiba G500 Call outgoing problem.But Idid formeted it "Format user partition" system. After have same problem & all incoming call ok.
any 1 will can give me solution for this problem ?
Dear all
I try to update my PPC 6600 from WM2003 2nd edition to WM6. I download and run WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT). After I try to finish the last step of the installation which is to cool reset the PPC, there are 4 color bands and only show "NO GSM", "D 5.70.11 WWE". I try to turn it off, but doesn't work. I try to connect back to PC, but PC can not find this device
Please help
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
imatrix said:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
Click to expand...
Click to collapse
I have tried, but not work, no format, no reset, stay the same
here is the message from the program. please help
USB>
USB>set 14 0
HTCST ÚÈHTCEUSB>set 14 0
HTCST ÚÈHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=EA0000
All:dwSize=1F20000
USB>task 0
USB>
I am very sorry, but I need help.
I am unable to fix this.
I am trying my best to follow the instructions and dont know where am i going wrong.
Like U said,
I went again with the Multi Port TTY utility and in the new USB text file window, ((stopped the wcescomm.exe application from taskbar)
I tried entering
set 14 0
USB>task 28
USB>task 0
USB>
Saved the file as USB
The phone in the cradle was still showing USB v1.02
I took the phone out of the cradle, removed the battery and inserted it back into the cradle
and i again starts showing USB v1.02
Where am i going wrong..
I also tried
USB>set 14 0
USB>task 28
USB>task 0
USB>
but in vain...
Please help in resolving this
I found http://forum.xda-developers.com/archive/index.php/t-273871.html online and the problem is almost identical as mine. Please help
i think u can flash it again
woi700 said:
i think u can flash it again
Click to expand...
Click to collapse
What do you mean flash it again?
It can not be detected by activesync
cables
Something like that happened to me a while back where i couldnt connect. The problem wasnt the BA but was the cable connections- usb cable connections. It stills happens today where i get a bad connection and i have to play around with the usb that is plugged into my laptop. Maybe you should check out how loose your usb connection is--try moving the cable around.
shazzy84 said:
Something like that happened to me a while back where i couldnt connect. The problem wasnt the BA but was the cable connections- usb cable connections. It stills happens today where i get a bad connection and i have to play around with the usb that is plugged into my laptop. Maybe you should check out how loose your usb connection is--try moving the cable around.
Click to expand...
Click to collapse
I have tried many time, but not work
reflash
get into boot loader mode, connect directly to pc with good direct usb connection, (screen should state, USB from SERIAL on connection), reflash.
ensure SD card is removed beforehand.
AbuGWM5 said:
get into boot loader mode, connect directly to pc with good direct usb connection, (screen should state, USB from SERIAL on connection), reflash.
ensure SD card is removed beforehand.
Click to expand...
Click to collapse
What do you mean reflash?
Does it mean that Reinstall the WM6, or install other OS like WM5?
However,Without activesync how can I do that?
OR reflash mean formart?
I try to fomart my ppc, but stuck in the white screen
Note: I have tried the following
http://wiki.xda-developers.com/index...UCK_AT_STARTUP
If you can get USB connection to your device, you can just try to reflash with same WM6. best of lucks.
restart your PC
Try reinstalling active sync on your PC or laptop and then shutdown your PC or laptop and then restart it. Then try connecting your BA afterwards.
shazzy84 said:
Try reinstalling active sync on your PC or laptop and then shutdown your PC or laptop and then restart it. Then try connecting your BA afterwards.
Click to expand...
Click to collapse
I did what you said, but my PC is still unable to detect my pocketPC.
In the pocketPC bootloader mode, I can see it change from serial to USB after I connect the usb bundle. What should I do?????
king2004c said:
Dear all
I try to connect back to PC, but PC can not find this device
Please help
Click to expand...
Click to collapse
try to disable windows firewall and any other firewall then try...
i have same problem my device can't connect to pc when i disable ISA firewall my ppc connected .
AddAn
addan said:
try to disable windows firewall and any other firewall then try...
i have same problem my device can't connect to pc when i disable ISA firewall my ppc connected .
AddAn
Click to expand...
Click to collapse
I have followed what you say, but still not work
I hear some people say that I can reflash the rom.
But
1. I don't know which rom they mean, my orginal one or updated one?
2. How can I get my original rom?
Someone say that if I try to connect via activesync under PPC bootloader mode, I could not see any connection in activesync, but I will hear some connection sound, then I can reflash my rom
But
1. How can I do anything if I can not see any connection in activesync
I have done what people say about using mytt1.24.
But,
What should I expect to see?
king2004c said:
Dear all
I try to update my PPC 6600 from WM2003 2nd edition to WM6. I download and run WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT). After I try to finish the last step of the installation which is to cool reset the PPC, there are 4 color bands and only show "NO GSM", "D 5.70.11 WWE". I try to turn it off, but doesn't work. I try to connect back to PC, but PC can not find this device
Please help
Click to expand...
Click to collapse
go here ftp://xda:[email protected]_1.15_Type_II/BA Radio 115 THIS WORKS.rar then use this to load your gsm extract BA Radio 115 THIS WORKS.rar somewere on your computer put your ba it to bootloader mode then put i into its craidle then run MaUpgradeUt_noID.exe wait till upgrade is done then take out of the craidle press reset button dont worry about activesync connecting
or not
update information
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
PPC6600 is a CDMA device and not a GSM, so you tried to flash a wrong ROM, sorry friend.
April 1 said:
PPC6600 is a CDMA device and not a GSM, so you tried to flash a wrong ROM, sorry friend.
Click to expand...
Click to collapse
could you please tell me where I can find the corret rom?
Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.
hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?
For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?
my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%
did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it
Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''
n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?
jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!
hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks
for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS
@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks
can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!
rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?
Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!
Hello
At the first sorry for my english ! : )
I have the problem like in a topic with lg f70 d315. When phone was working i rooted him and then i download ROM Manager to make "current rom image recovery". The application show me the title window with the backup name, i approve this and then phone shut down - black screen and it's all. : (
Can't power up the phone nothing happend, can't go into the "download mode", adb interface also is dead, nothing happens.
When i plugin the phone to PC, PC detects as a storage memory with size smth like 7 0 mb.
I Think that the program "Rom Manager" change my partirion or overwrtie this in some way.
Made some screenshot with content of this "storage memory", and partitions (this from disk 1, F).
How i can repair my phone?? please ! and one more time sorry for english and be patient with me ! : )
thanks!
Today connect phone to PC ( with ubuntu) it's show's all partitions and files, screenshot attached. : |
did you solve your problem?
I have identical situation