Hello
At the first sorry for my english ! : )
I have the problem like in a topic with lg f70 d315. When phone was working i rooted him and then i download ROM Manager to make "current rom image recovery". The application show me the title window with the backup name, i approve this and then phone shut down - black screen and it's all. : (
Can't power up the phone nothing happend, can't go into the "download mode", adb interface also is dead, nothing happens.
When i plugin the phone to PC, PC detects as a storage memory with size smth like 7 0 mb.
I Think that the program "Rom Manager" change my partirion or overwrtie this in some way.
Made some screenshot with content of this "storage memory", and partitions (this from disk 1, F).
How i can repair my phone?? please ! and one more time sorry for english and be patient with me ! : )
thanks!
Today connect phone to PC ( with ubuntu) it's show's all partitions and files, screenshot attached. : |
did you solve your problem?
I have identical situation
Related
Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.
Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...
thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.
I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz
present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.
another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.
some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.
In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!
It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH
Hello
I instaled the XDAtools , Activesync and all the rest but it not works.My xda is working I think becouse it goes on Bootloader screen V5.15 , on test screeen and backup to SD screen.
When I connect it to the computer (Windows XP) it comes out an erorr mesage :
"One of the usb devices attached to this computer has malfunctioned , and windows does not recognize it"
What can I do , someone can help me please.
Thanks
Alessandra
I have a cid and sim unlocked T-mobile mda running Wm5. Problem is now when I boot up the device it hangs @ the T-mobile boot screen. I have
ipl 2.26
spl 2.26
Gsm 02.25.11
os 2.26.10.2
Any help plz guys
EDIT... FIXED THE PROBLEM Found this in and it worked...
Ok here´s how I done it.
First, I must explain what was the problem.
After update the firmware (not actually upgrade, I had the phone full of trash, so I decided to reflash same firmware v2.18 PTG), the Qtek 9100 / HTC Wizard freezed at 2nd splash screen (the one that shows OS versions IPL version, ect). Tried many different versions, upgraded to 2.24, 2.25, downgraded even to 1.6.7.3, but always same problem, freezed on second splash screen. I read many topics on xda-dev, and seen some people with same problem. Apparently there was 2 solutions. 1- send phone back to warranty. 2- write backup ROM from SD in bootloader.
Passed more then 15 hours asking for this SD backup everywhere, and COULDN´T find any help. Apparently no one had this "SD dump ROM Backup".
So here´s how I solved my problem
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
The only Port Selections available are:
COM1
COM2
COM3
COM4
COM5
What am I doing wrong?
i got the same problem too
only com1 and com2 r there
pleace help me
Yes please someone help!
I want to try this, too, but my mtty tool only shows some com-ports and not WCEUSBSH001 ! what's wrong?
Does this work with mini sd cards bigger than 128 mb, too? is there a limit?
ok, I have the right port in mtty tool now, but...
when I enter "r2sd all" and press enter it says this:
r2sd all
***** user area size = 0x77F00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
what can I do?
any help is greatly appreciated!
Hi, sorry, my english is very bad... So I update my pocket PC witch "Xda_II_172181_Final" of forum.xda-developers.com/showthread.php?t=229259 . And now it's dead because obviously lost connection with PC. My PDA shows Serial at the top and v 1.01 below. When I put it in the cradle, it displays usb at the top and v 1.01 below. I keep trying the reccord button, power, and hard reset but it nothing happen Plyzz help me.
Serius said:
Hi, sorry, my english is very bad... So I update my pocket PC witch "Xda_II_172181_Final" of forum.xda-developers.com/showthread.php?t=229259 . And now it's dead because obviously lost connection with PC. My PDA shows Serial at the top and v 1.01 below. When I put it in the cradle, it displays usb at the top and v 1.01 below. I keep trying the reccord button, power, and hard reset but it nothing happen Plyzz help me.
Click to expand...
Click to collapse
Don't be panic man just follow the below steps and your device working like charm
It is actually the disconnection error
1 - first fully charged battery.
2 - install mobile device center or active sync ( as per your OS )
3 - Enter in to the bootloader mode
4 - connect USB cable with ppc device.
5 - wait for detection of the device
6 - drivers are automatically installed if you are using windows7 it shows
driver installed successfully & device is ready to use.
7 - extract the rom update utility from the posts whichever you like ( remember choose it carefully as per your device )
8 - just double click on upgrade icon in extracted folder and yeah you done.
if still any problem persists then fell free to contact me on [email protected]
Hello,
I've tried to reload my TYTN with Vanilla Rom to resolve the 'no gsm' message on it. During the flash, Usb link is lost and now when I turn on the PDA, I've just the screen above.
Now, the USB port don't work, when I connect the PDA on PC it don't see it. Maybe it is possible to restore it with SD card but how?
Thank you for your help an sorry for my bad english (french...)
Hello,
Nobody coud help me?
Or is that mean than my TYTN is definitely out?
Thanks.
get a storage card less than 2GB, format it and in your PC rename the Signed.nbh file to HERMIMG.nbh. Insert the storage card and put the device in bootloader mode it will start the flash from the sd card
Thanks a lot +QuePPC.
I 've execute your instructions, it better but after bootloader, I have wrote in blue on white screen 'loading', few seconds after 'checking' and finally '00028002' 'not allow'.
After that, the pda return on 4 colored blocs, on the upper (red) there is writting :
in white : HERM200 IPL-1.00
in yellow : HERM200 SPL-1.04
On the lower bloc (white) 'Serial'
When I reset the pda, I have these instructions at the bottom of the screen :
M 05
B 04 No GSM
B 05 D 3.22.0.0
Maybe this malfunction is due to a wrong rom but how identifie the right rom and where found it ?
Maybe it's due to the hardspl not installed but how install it wihout usb connection. ActiveSync don't connect the pda.
Thanks a lot for your help, have a good day.
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Sisise said:
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Click to expand...
Click to collapse
you can start searching at .... http://shipped-roms.com/shipped/Kai....0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe