Database Users

I need help to repair my Qtek

Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.

Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...

thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.

I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz

present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.

another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.

some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.

In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!

It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH

Flashing the Radio / modem on ipaq 614 - first ideas

Hi,
Hp just released an update for the 614, only for englisch.
I have a german 614
I dont care about the OS part since I use a cooked 6.1.
But the update also contains a modem / radio update to version 0.88.
Currently out there i think there are 0.77 and 0.81 depending on language.
I believe the radio fw is language independent when it comes to functionality. But the hpruu says wrong language.
With the current universal hpruu tools you can only update the OS which is of no use.
I know you can update the radio by booting with the key combination:
lower left key on the side (record button) and the camera button.
Then turn on ... it shows : SD loader for modem
(similar on how you update the OS)
I also know that the radio update files are in the update.
They are called
amss.mbn
amsshd.mbn
maybe also partition.nbf
But I am not sure about this.
It might work with just copying the file to a non HC SD card and using the key combination.
There might be some file renaming involved.
I someone out there to try that and let us know how it worked ?!
Thanks
sax

hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull

Saxon,
File partition.nbf is for IpaqFileStore update.
Maybe you should try with the following way:
- extract the whole package from HP side
- remove from the obtained directory the OS file (the larger one)
- put your device into SDloader state (voice recorder + mute + power on)
- connect your device into PC via USB
- launch RUU utility
In my opinion there is a big chance it will work.
Such way (using the SDloader) was working for one polish case where the upgrade of firmware failed due to PC crash. The only chance to flash again was to use SDloader + HP tool.
Good luck.

Z!L0G80 said:
hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull
Click to expand...
Click to collapse
I used the qpst already and it worked that way that i could upgrade but phone didnt boot afterwards. so i am very careful with this tool now.
I am just wondering why your sd loader (the OS image) update didnt work. because i had no probs with it so far. also from the hp orig files.
did you try the qpst update ???
if yes did it work if yes can you send a step by step ?
thx a lot

hi , try my patched ROMUpdate.dll mayby it could help , i dont try QPST because i have succesfully update my 614c with hpruu utility --> http://rapidshare.com/files/139300161/ROMUpdate.dll.html

did you also try the cooked wm6.1 os on it already ? does it work with the new fw0.88 ?
thanks !

yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok

Z!L0G80 said:
yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok
Click to expand...
Click to collapse
No success ... either with the romupdate.dll oder with the other tools.
A bit stuck now ... anz other suggestions ?
thanks !

forwarded
29 Jul 2008 release on HP Official Site HP iPAQ 612c WM 6.0en OS 1.01.04 FW 0.88
HOW TO USE:
1. Download the FILE to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade)
3. Establish an ActiveSync connection between the iPAQ device and the host PC using a USB connection.
4. The ROM Update Utility (hpRUU.exe) starts automatically. Follow the on-screen instructions to complete the ROM upgrade.
NOTE: Once the update is complete, the FILE downloaded in Step 1 can be deleted, if desired
Download Link: http://www.mediafire.com/?sharekey=a65dc2a6e56aea29d2db6fb9a8902bda

Thats correct
But thats for english devices.
I have a german one where it doesnt work, and I am looking for a workaround.
Any suggestions ?

Get Hp Sp38905.exe http://h20000.www2.hp.com/bizsuppor...swLang=18&mode=2&taskId=135&swItem=hh-59339-1
Use winrar to unpack it.
You'll find an Eboot.nbf. This Eboot.nbf is language and SKU id independent.
Replace the file header of all .nbf files from hp 1.01.04 update by the header of this Eboot.nbf file.
The header is just the first 3424 bytes of .nbf files.
You do not need to change .mbn files.
Then you can run Hpruu.exe to update. The file names shown during updates are wrong, but results are right.

@kkwy
And what if, like in my case, sp38905 is reporting the same error.
product id: FB136AA#ABB

Just try to find one .nbf file that you can flash.
Then replace header file with the header file of that .nbf file.
The header seems to be useless (solely for checking) so you can replace then at will.

http://rapidshare.com/files/139300161/ROMUpdate.dll.html mayby now working ,try
EDIT> link updated

@ Z!L0G80
Yes, It works.
Thanx

Sucess!!
Now I have os 1.01.04, fw 0.88.
It takes a long time for radio firmware to flash, but, be patient.
Thanx again Z!L0G80

Thanx Z!L0G80's
It works for me to on the Dutch 614.
Strange thing is, that in de system config it stil says Dutch version of the mobile device (but it's UK now).
Very nice again.

ok great .... works ! thanks a lot !
would it also work with the 914 ? anybody tried ?
thx

My PDA already came with 1.01.04, fw 0.88 Rom, however I used the HP rom update utility to see if the rom would update without issues.
The rom update worked fine, however unfortunately something annoying is happening with this rom update. Now every time I try to do a clean boot, the first time the PDA turns on, after marking the screen, it would try to do some HP software update and right after the update I am forced to do a Reset, then I can use the PDA.
Previously I didn't have to do this, when I did a clean boot, the pda worked straight away after marking the screen, and I wouldn't need to reset it.
I think the reason for this maybe because this rom comes with extended rom, is there anyway of taking it back the way it was, or getting rid of the extra applications like the streaming player
This is the Rom I used
Type: BIOS
Version: 1.01.04 (22 Jul 2008)
Operating System(s): Microsoft Windows Mobile 6
File name: sp40097.exe (53 MB)
http://h20000.www2.hp.com/bizsuppor...3048-1&prodTypeId=215348&prodSeriesId=3544358
Am I the only one experiencing this issue, is there another rom that doesn't do this?
Thanks

anyone tried Sd loader modem with success?
what if the Activesycn not work?
I have tried copy the amss** files on SD, then sd loader modem. And wait so long time, 2 hours, and stay with the screen "write amsshd.mbn". I dont think it is working.
Anyone tried ?

[Q] hw6915 wm6.1 rom

Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.

hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?

For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?

my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%

did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer

You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.

Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it

Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).

my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A

jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''

n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?

oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?

jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!

hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks

for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS

@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks

can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!

rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?

Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!

How to unbrick a Dell Venue Pro

The following steps should unbrick your Dell Venue pro in most cases (this will not unbrick your phone if you updated the touch screen firmware via the EM app). You can do this at your own risk. I strongly suggest calling or e-mailing Dell Mobility Support before doing this. If your phone is out of warranty, you replaced the SD card, or did something else really silly to it then this might be your only option. You will lose all data on your phone with this method. Your contacts should be backed up on Live/Hotmail/Facebook/Twitter/Etc. and your images on SkyDrive. Everything else will be wiped. You phone will be wiped back to Version 7704 (or what we had when the phone launched back in October of 2010).
The following instructions are for Windows-based machines. There might be a similar utility for Mac’s but I have no way to find out. You are on your own if you have a Mac.
Unplug your DVP, Remove the battery.
If you replaced your SD card (and voided the warranty in the process) please insert your stock SD card at this time. If you never touched your SD card then you can obviously skip this step.
If your phone already has the stock SD card in it, please wait 10 seconds, and put the battery back in. You may put the cover back on as well if you like.
Now we are going to enter the boot loader (this is how your bricked phone can receive the FFU file) by holding the volume down (-), camera, and then power buttons. DO NOT RELEASE THESE until you see the image of a phone, USB cable, and laptop.
Connect your Dell Venue Pro to your computer with the USB cable that came with the phone or one that has the same or higher specs. I have seen it take up to 10 minutes for the phone to be recognized by your computer. If after 10 minutes your phone hasn’t connected, try another USB port and/or cable.
While your computer is installing the drivers/connecting to your phone download the following file and extract it.
http://www.multiupload.com/5YT27EHLZV
VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.zip (138.7 MB)
While this is downloading, close Zune if it is not already closed as it takes a few seconds for it to really unload from memory.
Once you think your phone has been connected, open up command prompt (you may need to start it in admin mode depending on your security settings) by typing “cmd” in the start menu or going start -> run and entering “cmd”.
Change directory to “C:\program files\zune\” by typing “cd C:\program files\zune\” and hitting enter
Then type “UpdateWp /list” and your phone should show up there. If it hasn’t be patient and read step 3 again.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory. You may wish to rename this file before copying it over to something shorter if you wish for the next part.
Now back in the command prompt window type “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu”. If you did not rename the FFU file you can type Venue and then hit tab to auto complete the name otherwise enter the name of the FFU file you renamed.
Hit enter and DO NOT unplug the phone. This process can take anywhere between 60 seconds and 10 minutes.
This should work and bring you back to the stock state. If it does not you can retry this a few more times but if after 2 or 3 times it does not work then you need to contact Dell as your phone is royally screwed.
You can now re-open Zune, pair your device, and update all the way back to Mango (this could take up to an hour).

Now I wonder if there is a way to edit that ffu file ...

domineus said:
Now I wonder if there is a way to edit that ffu file ...
Click to expand...
Click to collapse
That would be nice

I have a question:
My phone told me:
So I tried many of my backup (first boot,Nodo and mango beta backup) to restore it and the ffu backup file but my phone boot in 20mins and no access to EM or any other application but I have an home screen...
Can you tell me if I try to replace my sd card and flash with the ffu i can retreive a working phone?
(Dell doesn't respond to my mails)

There are other threads already dedicated to replacing the sd card.

'Then type “UpdateWp /list” and your phone should show up there. If it hasn’t be patient and read step 3 again'
I tried entering that but it said 'updatewp /list' is not a recognized as an internal or external, operable program or batch file.' Is there something I'm doing wrong? I've tried it on two different laptops.
Please reply as soon as possible

then you dont have the updatewp tool installed...update your zune.

MJCS said:
then you dont have the updatewp tool installed...update your zune.
Click to expand...
Click to collapse
I have the latest zune and there's nothing to update. Is the updatewp tool a seperate program?
nevermind I found it, working

I am glad I could help

totoropororo said:
I have the latest zune and there's nothing to update. Is the updatewp tool a seperate program?
nevermind I found it, working
Click to expand...
Click to collapse
hey i have the same problem you had. please could you tell me where you found it?

asim2462 said:
hey i have the same problem you had. please could you tell me where you found it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1262471
Here you go~!
The OP should make it clearer on the original post for newbies like us ._.

much appreciated. deserve my thanks!

Hello!
I replaced the broken screen on DVP. But now when you turn on DVP he says "Storage card not working".
I'm trying to apply the decision of the post, but if you type updatewp / list or updatewp / ffu ...... - I get an error message following items:
C: \ Program Files \ Zune> updatewp / list
UpdateWP version 4.8.2345.0
Error: System.IO.FileNotFoundException: Could not load file or assembly "In
terop.WM7UpdateLib, Version = 4.8.0.0, Culture = neutral, PublicKeyToken = null "or
din of its dependencies. Can not find the file specified.
File name: "Interop.WM7UpdateLib, Version = 4.8.0.0, Culture = neutral, PublicKeyTok
en = null "
in Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize ()
in Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance ()
in wm7update.Program.Main (String [] args)
Warning: check assembly bind off.
To enable assembly bind failure logging, set the parameter value
registry [HKLM \ Software \ Microsoft \ Fusion! EnableLog] (DWORD) to 1.
Note. Registration assembly bind failure can lead to some reduction
NIJ performance.
To turn this feature off, remove the registry value [HKLM \ Software \ Microsoft \ F
usion! EnableLog].
C: \ Program Files \ Zune>
Please help!

Gorokhovsky said:
Hello!
I replaced the broken screen on DVP. But now when you turn on DVP he says "Storage card not working".
I'm trying to apply the decision of the post, but if you type updatewp / list or updatewp / ffu ...... - I get an error message following items:
C: \ Program Files \ Zune> updatewp / list
UpdateWP version 4.8.2345.0
Error: System.IO.FileNotFoundException: Could not load file or assembly "In
terop.WM7UpdateLib, Version = 4.8.0.0, Culture = neutral, PublicKeyToken = null "or
din of its dependencies. Can not find the file specified.
File name: "Interop.WM7UpdateLib, Version = 4.8.0.0, Culture = neutral, PublicKeyTok
en = null "
in Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize ()
in Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance ()
in wm7update.Program.Main (String [] args)
Warning: check assembly bind off.
To enable assembly bind failure logging, set the parameter value
registry [HKLM \ Software \ Microsoft \ Fusion! EnableLog] (DWORD) to 1.
Note. Registration assembly bind failure can lead to some reduction
NIJ performance.
To turn this feature off, remove the registry value [HKLM \ Software \ Microsoft \ F
usion! EnableLog].
C: \ Program Files \ Zune>
Please help!
Click to expand...
Click to collapse
This arises from a previous installation of Windows Phone Support Tool. You have to uninstall it and then install/reinstall the file found in this link http://www.megaupload.com/?d=PL7H6FKJ) and then I copied the files in this link http://forum.xda-developers.com/showthread.php?t=1262471 to the Zune Directory.
Hopefully that solves your problem.

totoropororo said:
This arises from a previous installation of Windows Phone Support Tool. You have to uninstall it and then install/reinstall the file found in this link http://www.megaupload.com/?d=PL7H6FKJ) and then I copied the files in this link http://forum.xda-developers.com/showthread.php?t=1262471 to the Zune Directory.
Hopefully that solves your problem.
Click to expand...
Click to collapse
Thank YOU VERY MUCH!!!!
It's WORKED!!!
Here I took a Zune http://www.megaupload.com/?d=KY8J8SIY

Hello!
DVP restored, upgraded to the latest version. But phone does not see MicroSD HC 32Gb Class 10. Before that, everything worked fine. Now available in 32 Gb only 400 Mb: (
Put on the stock card 8Gb Class 4 - worked. But ...
Several times already rolling away in 7004, updated again - anyway, just out of 32Gb 400Mb ...
EM Test says SD Card - not installing, but the DVP should not run without the card!
Please, help me again...

DVP really work without a memory card But I do not need. So it does not work 32Gb ...

Seems Megaupload site has been taken down by the US Gov
Any other links for the Venu Flash File

Sorry guys, I can't seem to find another version of the first link I listed. I deleted mine unless someone can reupload it. The only suggestion I have is to try and check this link (http://www.multiupload.com/EQK2RPH3P6) file for the 'updatewp.exe', which should install 'Windows Phone Engineer Flashing Tool'. Why oh why did they shut down Megaupload, when it also had its legitimate reasons as well. But I can't blame them or agree with what those Pro-SOPA and PIPA are trying to do. There are always two sides to every story I suppose.

what was the name of the file you said that has to be uninstalled / reinstalled

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx

If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300

THX!
I will try ... downloading ...

So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...

I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(

Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.

YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415

so it´s over ... i send the phone back ...
Thank u very much 4 helping.