Database Users

USB unable to connect; but able to charge

All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ

sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall

Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?

I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again

marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....

Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!

use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours

i don't think you need this program as it is already available in control panel -> connections -> usb-pc

hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.

pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ

Unable to connect
Hi,
I have the same problem. Anyone solve this?

I have a cable that just wont sync, try a different cable maybe.

wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!

I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?

I had a defective cable. It did exactly what you are describing. All other cables worked fine.

Unable to Syn with PC after upgrade ausdim's Rom!

Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.

I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know

Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...

vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...

Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card

YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !

i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?

..........anyone?

your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .

WM6 upgrade fails,need help,will donate if problem is solved (please help)

After I read http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
It says The WM6 does not work on PH20A2 (Harrier) (Audiovox PPC-6600 / PPC-6601 / XV6600)/ CDMA device! <-- that is my mistake
My mistake steps:
1. upgrade 2003 2nd edition to WM6 (I see 4 color strip with "NO GSM" at the bottom, stuck in there. The PPC will stop if I remove the battery for a few seconds and put battery back)
2. use mytt <-- may not hurt (I see 4 color strip with "NO GSM" at the bottom, stuck in there. The PPC will stop if I remove the battery for a few seconds and put battery back)
3. Do hard reset, format the PPC (stuck in white screen, then do soft reset. The PPC will ""NOT"" stop if I remove the battery for a few seconds and put battery back)

reflash
Have you tried re-flashing with the original ROM?

AbuGWM5 said:
Have you tried re-flashing with the original ROM?
Click to expand...
Click to collapse
What do you mean reflash?
Does it mean that Reinstall the WM6, or install other OS like WM5?
However,Without activesync how can I do that?
OR reflash mean formart?
I try to fomart my ppc, but stuck in the white screen

You got to revert back to WM 2003 SE with your original OS.

April 1 said:
You got to revert back to WM 2003 SE with your original OS.
Click to expand...
Click to collapse
I try to connect my phone under bootloader mode. However, both my computer and my notebook can not detect my Pocket PC.

king2004c said:
I try to connect my phone under bootloader mode. However, both my computer and my notebook can not detect my Pocket PC.
Click to expand...
Click to collapse
put you ppc into bootloader mode then put it into the craidle then go to startmenu on you computer
then go to computer then right ckick youll see properties click it
then system properties sould show click hardware then device manager
do you see windows CE USB Devices if you do then click it then you sould see microsoft USB Sync
if it dose then go here
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQhave

rickwyatt said:
put you ppc into bootloader mode then put it into the craidle then go to startmenu on you computer
then go to computer then right ckick youll see properties click it
then system properties sould show click hardware then device manager
do you see windows CE USB Devices if you do then click it then you sould see microsoft USB Sync
if it dose then go here
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQhave
Click to expand...
Click to collapse
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
Btw, I post the question to the FAQ too

try to take out first SD Card and SIM CARD from your BA first before connect to your notebook/PC

king2004c said:
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
Btw, I post the question to the FAQ too
Click to expand...
Click to collapse
You did very stupid thing, you have flashed GSM based rom to a CDMA device, the only thing you can do is to use WM2003SE, flash your device with its original or any CDMA (Harrier) based WM2003SE rom
Quick Howto:
Put your device in bootloader mode, put it on the cradle, start the upgrade including radio (the same version can be flashed on top of the previous one), this will fix your device, if it does not then after successful WM2003SE upgrade do the MTTY "set 14 0", "task 28", "task 0".
Keep me posted if you have problem
P.S.
WM5 and WM6 does not work on Harrier (CDMA Blueangel) device, i hope my instructions to help you to have at least usable device

xplode said:
You did very stupid thing, you have flashed GSM based rom to a CDMA device, the only thing you can do is to use WM2003SE, flash your device with its original or any CDMA (Harrier) based WM2003SE rom
Quick Howto:
Put your device in bootloader mode, put it on the cradle, start the upgrade including radio (the same version can be flashed on top of the previous one), this will fix your device, if it does not then after successful WM2003SE upgrade do the MTTY "set 14 0", "task 28", "task 0".
Keep me posted if you have problem
P.S.
WM5 and WM6 does not work on Harrier (CDMA Blueangel) device, i hope my instructions to help you to have at least usable device
Click to expand...
Click to collapse
I can reboot my device now, but the bluetooth does not work (all other main function seem works OK). I hope there is some solution that help me to fix the bluetooth becuase I have a external bluetooth gps receiver which I need to use it with my ppc all the time. Please help

king2004c said:
I can reboot my device now, but the bluetooth does not work (all other main function seem works OK). I hope there is some solution that help me to fix the bluetooth becuase I have a external bluetooth gps receiver which I need to use it with my ppc all the time. Please help
Click to expand...
Click to collapse
Please understand what xplode wrote to you, you can not use the GSM ROM on your device, so dont try to check bluetooth etc, go back and reflash your device with the original ROM following what explode said above. Dont you want to save your device?

April 1 said:
Please understand what xplode wrote to you, you can not use the GSM ROM on your device, so dont try to check bluetooth etc, go back and reflash your device with the original ROM following what explode said above. Dont you want to save your device?
Click to expand...
Click to collapse
I have already find a CDMA rom. Now the only problem in my phone is bluetooth

Well describe the exact problem, BT does not turn on at all, or maybe it returns error of some kind?
Please be more specific

xplode said:
Well describe the exact problem, BT does not turn on at all, or maybe it returns error of some kind?
Please be more specific
Click to expand...
Click to collapse
So far, I can use the phone without any problem. Previously, I tried to upgrade my phone because I want to use bluetooth headset to listen music. That can only be done in WM5 or later. Now I reinstall my CDMA version of WM2003. I find out that the bluetooth does not work due to expire of lincese key. Does anyone have any suggestion how I can over come it? I just want my phone back to exact a few day ago. Thanks
thanks

lincese
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself since I dont face such prob, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.

meehaa said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself since I dont face such prob, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
Thanks, but does not work on my PPC6600

Done all, can´t syncronize!!! Help

Hello to everybody!
After all I have to say that this is a fantastic forum for users of Qtek S200 (Prophet). I bought one last week and started to see what I could do. Therefor... I'm a newbie
This is my first thread, hope that some one can help.
After trying to understand the world of Prophet, I first changed the ROM to an official Qtek ROM.
Now I what to sincronize with my PC to transfer photos and put some software and apps in the card. Like I read here, I downloaded the activesync from microsoft site, instaled it and plugged the cable to my pda. Nothing happened. Than I went to activesync connections enabled USB connection and tapped in connect. After a search, the pda was simply not found. Even after turning down de AntiVirus and Firewall, nothing happened.
What happened? I have to do something in the PDA? Couldn't find that info in here.
Thank's in advance for the help
Heurd

Does the LED in the speaker at the top change to orange?
Does the computer react at all? (any sounds etc.)
If not, try putting the device into bootloader: Press and hold the COMM button and then soft reset, and then plug it into your computer and see if anything at all happens.
If nothing happens, the USB cable is damaged. If the computer responds when the device is in bootloader but not when it is in, the ROM may not have the required software installed in it.

Hi,
Yes, the Led turns orange. I can charge the battery with that cable. But i also read that it's possible in some cases to charge but the part to syncronize can be damaged!!!
But what really intregues me is that I used that cable to put the ROM that I have. Supposedly it's a Qtek official ROM, i don't know if you can conclude something with this:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.29
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
thanks to l3v5y for the sugestion... I will try and than post here what happened.
does anyone has anymore suggestions... I will try everything to put this at work.

In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
Click to expand...
Click to collapse
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.

l3v5y said:
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
Click to expand...
Click to collapse
That is surelly not the problem because I installed AS 4.5, restarted the computer more than once, removed that and reinstalled and nothing... I even had put de AS 4.2 to try and see if it worked - nothing.
Now I'm not in my computer... I will try what you suggested when I go home.

I think it may be something to do with the USB cable...

Had that problem a while ago, my solution was to reinstall windows xp and it worked. so backup your pc, format your hard drive and then install the os (windows xp/vista). i guess it was usb-driver related.

REALLY
Unbelieveble...
well, It's easier to try in another pc before formatting mine. I'm not in the mood (too much time to put like I like)
That way I will check and see if my cable and ROM are allright.
Thanks for the tip croco_64
Hope to tomorrow come in here and wright that it's everything ok

Hi there!
Well... I've tried what you proposed. It is probably a problem of the cable. I tried with a cable of a digital camera and finally the computer detected the phone (with mine it only went orange light in the top, but never recognized - despite I changed the ROM with it ). However it gives an error - the instalation is not complete!!! I went to device manager in the PC and there was a yellow (!) in the windows mobile device.
Is it of the cable!? Do the cable have to have specific properties to sync the pda and the pc? The camera cable isn't enough?
yes... I had put activesync 4.5 in the PC!!!
thanks again for the help

Need urgent help plz...

Hi, I tried to get answer for my problems, but none any specific
so I`m startin a new thread...btw
My JASJAR has the same problem as lots of folks around here like it shuts off at any hard work like starting the camera or charge at 60%. I came to an end that as it works ok with the charger on, then the problem must be on battery. Well I'll try that
But the another problem is PC connectivity...it doesn't recognize the device
I tried MS Active Sync 4.1, 4.2, 4.5, windows 2000 SP4, xp SP2, different computer...just no luck, in bootloader mode it shows "serial" and "0.60" and whenever I plug in the USB, it shows USB, and then same, device not recognized...what to do?
And when I start the device, on blue background imate logo..it shows Radio 0.00.00, what does it mean..I can't even upgrade it as USB is not recognized...waiting for flash from SD, but no luck. Can any one sort these things out

First problem, almost definitively the battery.
Second and third problems could even be correlated, first the third problem/doubt, even if I'm not a complete expert, this means that your device was "unlocked" with the aid of a specific program that does just that (if you're interested in knowind how, go to the uni's wiki and read about unlocking), the Radio version 0.00.00 is just a "by-product" of that process.
So, if you're asking about this, you didn't do this by yourself, so you don't know what and how much has been done to your PDA, then for your second problem, first try a soft reset (this is always windows, remember it!), the re-connect the device (to the PC) and see what happens, then verify that you have the active sync program installed properly (and running) in your PDA, just when you connect the PDA to the computer, the active sync should become available as a running program, so, connect the PDA to the computer, the PDA turns on and says connecting, even if it does not connect to the computer you should see active sync running in your PDA, go to settings, system, memory, running programs and verify that it's there.
Another cause could be hardware (on your PDA), this means, cables and port or even internal (but this is quite unlikely).
Perform these tests and see what happens, then we'll see what else can be done.

Thnz, I trued several soft reset even hard reset,
I tried connecting to the computer with ActiveSync on, with some other software which changes the active sync connection to something like USB serial (from RNDIS ...), even advance networking off, taking out the SIM and memory card...running the device search..no luck.
and btw in computer after installing active sync it gives a window with all menu disabled except "File>Connection Setting". I tried by using bluetooth connectivity. No luck.
I read the thread about unlocking..and tried to do the rest..I mean the second step of unlocking, it showed device successfully unlocked..but all the same.
Any help....

mamaich method
Try this,
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .