All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ
sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall
Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....
Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!
use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours
i don't think you need this program as it is already available in control panel -> connections -> usb-pc
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ
Unable to connect
Hi,
I have the same problem. Anyone solve this?
I have a cable that just wont sync, try a different cable maybe.
wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!
I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?
I had a defective cable. It did exactly what you are describing. All other cables worked fine.
Related
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks
Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.
zuza said:
Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.
Click to expand...
Click to collapse
I have made all that, but still nothing happens.
RRibeiro said:
I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks
Click to expand...
Click to collapse
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?
apd said:
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?
Click to expand...
Click to collapse
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.
RRibeiro said:
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.
Click to expand...
Click to collapse
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.
apd said:
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.
Click to expand...
Click to collapse
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.
RRibeiro said:
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.
Click to expand...
Click to collapse
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.
apd said:
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.
Click to expand...
Click to collapse
Is there any way to clean WMDC completly from my system?
I try'd uninstall, but it seams that some leftovers stay behind.
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
phlashlite said:
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
Click to expand...
Click to collapse
Have you tried to restart your PC and try different port?
Sometime this trick works
silverwind said:
Have you tried to restart your PC and try different port?
Sometime this trick works
Click to expand...
Click to collapse
Restarted the PC - worked like a charm. Thanks a million. I can breathe again.
...And I just made a modest donation. Thanks very much.
Troubleshooting Sync Connection with Your Computer
You can often solve any temporary sync connection problems by disconnecting your phone from the sync cable, waiting a few seconds, and then reconnecting it. However, sometimes you may experience persistent problems related to your network connection (for example, your Internet connection). You may be unable to sync your phone while there is an active network connection on your computer, or the network connection may be cut when you connect your phone to your computer. If this happens, you can try switching to a serial USB connection for your phone:
1. On the Home screen, slide to the Settings tab.
2. Tap Menu > All Settings > Connections > USB to PC.
3. Clear the Enable faster data synchronization check box.
4. Tap Done.