ok but if i use fresh kitchen to root my phone can i use DamageControl v2.07.2. ??
DamageControl v2.07.2 is Android 2.1
xxxk15 said:
ok but if i use fresh kitchen to root my phone can i use DamageControl v2.07.2. ??
DamageControl v2.07.2 is Android 2.1
Click to expand...
Click to collapse
Yes it just roots your phone for you,then you can install any rom you want!!!
also does fresh kitchen put a nandroid on my phone so i can put it onto my computer?? and does it put a backup on it??
fresh kitchen replaces your recovery image with a new one. this allows you to press vol down + power to get into 'recovery mode' from there you can make a nandroid backup.
really volume down? I have always just held the home button...i should try that sometime.
Yeah mines always been power off phone,then hold home hit power.
Related
hi guys i flashed my htc hd2 wm6.5 to nand android rom in 1st 1 week of usage i have no problem and enjoyed the nand android rom in my htc hd2 until one day my hd2 hang and when i reboot my unit it was hang on splash screen only....
i reflashed it using magdlr ver. 1.11 into the same nand rom im using but i have no luck...it still stock on tje android splash screen...what will i do guys?
im planning to flash it to wm6.5 rom,but what will i do?it never boot on tri color screen it only boot on magdlr screen
and how can i flash it wm6.5 rom cook or stock rom i want to revert it back to wm6.5
my hd2 running on gingerbread 2.3.3 nand(V1.8) rom before it malfunction..
Well, my forensic analysis has come up with the following technical and somewhat difficult solution to your present problem: "Click the search button"
Now I know it may sound intimidating, but I tested that feature out for you and came up with this:
http://forum.xda-developers.com/showthread.php?t=905841
matt
Shut down completely your phone (remove batter for 15 sec too)
Place battery back and now hold volume down button.
Still hold volume down button and switch on your phone.
You get 3 color screen.
Now attach your usb cable and connect it to PC
Find on this forum your phone stock win mobile rom (link to officila roms thread)
Run stock win 6.5 rom exe (this is sample name: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe)
Follow instructions on your PC screen. On final your phone reboots.
Enjoy your stock phone.
hi datasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
can i flash wm6.5 rom into magdlr usb flasher?
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
Switch off, hold vol down button in and switch on.
As ClydeB1, states you must hold the vol down only and not hold the power button.
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
when you get ready to power back on you have to hold volume down and keep holding it while is booting and it should switched to the tricolored screen, plug the usb cable and it should say usb at the bottom when it connects, and if you have hardspl which I know you have after running android, you can use any custom winmo6.5 rom it doesn't have to be an official rom.
can i flash wm6.5 rom into magdlr usb flasher?
No, flash from bootloader.
awts...i cant enter into booloader mode....im so sure what im doing i sure i follow the instructions of you guys....holding down the vol button and switch on
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
I don't think you can flash WM6.5 with flasher. You have to restore from recovery screen by remove battery and restore.
ClydeB1 said:
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
Click to expand...
Click to collapse
yeah im sure i was holding down the volume botton and switch the power on
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
ClydeB1 said:
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
Click to expand...
Click to collapse
volume botton is perfectly working it work around in magdlr mode actually i flashed my hd2 into android rom right now flashing is done without problems, but its not boot normarly it boot only in splash screen....
can you guys post a link of task 29...i will try this method and flash stock rom
but the main problem is i cant enter into bootloader mode
I use this tool for Task29 - http://forum.xda-developers.com/showthread.php?t=917807
Once you run Task29 though it will wipe the NAND memory and magldr and if you can't get back to bootloader mode then you will be stuck on the splashscreen.
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
temporary_24 said:
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
Click to expand...
Click to collapse
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
ClydeB1 said:
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
Click to expand...
Click to collapse
Hi,
Yes. I had one with a 8 on it. I've installed the other, and it worked (or the other way). Thanks.
Regards,
guys my phone revive with a jtag procedure i went to a technician shop here in the phillipines
my phone running in stock rom again...
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
May I redirect you to the Q&A section?
8times0 said:
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
Click to expand...
Click to collapse
This is the wrong section to post this.... but all you have to do is pick out a winmo rom you want from the winmo rom section...here: http://forum.xda-developers.com/forumdisplay.php?f=534
I always used energy rom... it's one of the more popular ones and works well with android on sd.... here's link to energy thread: http://forum.xda-developers.com/showthread.php?t=591784
Once you pick out rom, then to flash, go to bootloader by holding the down volume button while you turn phone on. It should go to tri-colored screen. Plug into usb on computer. Wait for any drivers needed to install. Word on bottom of phone screen should change from serial to USB. Once it says USB, then run the rom update utility that's in the rom folder you downloaded and follow directions. And it'll flash the rom and you'll have winmo back.
It may be a good idea to task 29 it too, but it's not necessary. Search about task29 to learn about that, or read the sticky rollup threads at top of winmo rom section.
8times0 said:
hello everybody,
i got a question about how to install windows 6.5 back on to my htc hd2 again..... i installed a android nand rom (ultimate on my phone the htc hd2)..
but i like the sd android install better (harret).
so my question is ..... how can i install windows 6.5 back on this phone again...
and which files i do need. and what to do.. cause i have NO CLUE!
i already want to thank you for re-directing me or helping me out!!!!
Click to expand...
Click to collapse
It's very simple.
- turnoff your HD2.
- Press "volume down" and press "power key"----> you HD2 go to bootloader.
- Plug cable into PC and your HD2.
- open folder rom_stock and run "ROMUpdateUtility".
- about 5-10 minutes, your HD2 is WM6.5.
And what do you do if vol down and power key doesn't bring you to bootloader but to reboot ? and if vol- vol + power does'nt reset ?
aldai2 said:
And what do you do if vol down and power key doesn't bring you to bootloader but to reboot ? and if vol- vol + power does'nt reset ?
Click to expand...
Click to collapse
It means your HD2 is going broken down.
Not really : nandroid works fine !!!!
You have to turn off your phone first, then turn on pressing vol - and power key and release the vol- only after seeing the tri color bootloader
The same question...
I have tried to use HTC reset tool.
However, it is not successful.
I have a HTC HD2 with android nand on my phone. my issue is can i update my radio to the newest version and how? I just had it updated to [27.MAR][CWM] NexusHD2-Gingerbread V2.5 [Android2.3.3][Kernel: tytung_r8.3]. And it it running great. I just need to get my radio version up to par. please help and leave step by step as i am new thanks to all....
firemanj79 said:
I have a HTC HD2 with android nand on my phone. my issue is can i update my radio to the newest version and how? I just had it updated to [27.MAR][CWM] NexusHD2-Gingerbread V2.5 [Android2.3.3][Kernel: tytung_r8.3]. And it it running great. I just need to get my radio version up to par. please help and leave step by step as i am new thanks to all....
Click to expand...
Click to collapse
1.Task29 (all internal memory of the phone will be wiped)
2.Download the latest/correct radio for your phone (*WARNING you may brick your phone if wrong version is downloaded and installed)
3.Enter bootloader "power button + up/down volume" while connected to pc.
4.Run/install latest radio version.
5.Reinstall your android room
http://forum.xda-developers.com/showthread.php?t=893948
No!!! Holy crap, Why on earth would you task 29 to flash a radio?? Task29 doesn't even wipe the radio partition.
@op, ,,, into bootloader, (power and voldown, not vol up), connect USB, flash radio, restart, done. New radio, same rom, no lost data, android never even notices what you just did.
Or unzip and rename the .nbh file from the radio to LEOIMG.nbh.
you only have to right click the file, select rename, and type LEOIMG, then hit enter.
Put that file in the root of your SD card and power on phone and hold volume down, follow directions. Soft reset after complete.
Sent from my HTC HD2 using Tapatalk
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...
hi friends
when i want to instal clk or orginal rom on my device from sd card on bootloader load my leoimg.nbh
and have 2 choise press power button to start or voldown to cancel
when i press power button do nothing
but when i press vol down it canceled
and i cant upgrade my phone
what is the problem?
tnx
how about magldr?
try the link below
un4giv3nb0y said:
hi friends
when i want to instal clk or orginal rom on my device from sd card on bootloader load my leoimg.nbh
and have 2 choise press power button to start or voldown to cancel
when i press power button do nothing
but when i press vol down it canceled
and i cant upgrade my phone
what is the problem?
tnx
Click to expand...
Click to collapse
are trying to install a nand or sd version of android? Or are you trying to install a wm 6.5 rom?
Sent from my HTC One X with Beats Audio using Tapatalk 2
un4giv3nb0y said:
hi friends
when i want to instal clk or orginal rom on my device from sd card on bootloader load my leoimg.nbh
and have 2 choise press power button to start or voldown to cancel
when i press power button do nothing
but when i press vol down it canceled
and i cant upgrade my phone
what is the problem?
tnx
Click to expand...
Click to collapse
You might have a problem with your power button. I know with my HD2 I have to press my power button pretty firmly and hold it for just a second also I have press the button slightly off center. Try pressing the power button several times and with different amounts of pressure and in different positions on the button. Also have you considered flashing cLK via USB by using a custom RUU? Go to here to download the custom RUU and here to download the most recent version of cLK. Take and create a file on your computer and put the custom RUU in it and extract the .nbh file from the lk.zip and put the .nbh in the folder as well. Then right click the RUU and select run as administrator then just follow the on screen instructions. You can also use the custom RUU included in the HD2 NAND Toolkit if you want.
rawdaddymagraden said:
are trying to install a nand or sd version of android? Or are you trying to install a wm 6.5 rom?
Sent from my HTC One X with Beats Audio using Tapatalk 2
Click to expand...
Click to collapse
yes im trying to install wm6.5
and the button work corectly in other programs but here doesnt
T-Macgnolia said:
You might have a problem with your power button. I know with my HD2 I have to press my power button pretty firmly and hold it for just a second also I have press the button slightly off center. Try pressing the power button several times and with different amounts of pressure and in different positions on the button. Also have you considered flashing cLK via USB by using a custom RUU? Go to here to download the custom RUU and here to download the most recent version of cLK. Take and create a file on your computer and put the custom RUU in it and extract the .nbh file from the lk.zip and put the .nbh in the folder as well. Then right click the RUU and select run as administrator then just follow the on screen instructions. You can also use the custom RUU included in the HD2 NAND Toolkit if you want.
Click to expand...
Click to collapse
my sub port doesnt work because of that i want to install wm6.5 from sd card in boot loader!
and the red button work corectly every where but it desnt in there
un4giv3nb0y said:
my sub port doesnt work because of that i want to install wm6.5 from sd card in boot loader!
and the red button work corectly every where but it desnt in there
Click to expand...
Click to collapse
Ok sorry I sd not know your USB port does not work.
un4giv3nb0y said:
my sub port doesnt work because of that i want to install wm6.5 from sd card in boot loader!
and the red button work corectly every where but it desnt in there
Click to expand...
Click to collapse
have you tried putting the stock ROM on your SD card and turning on to the bootloader?
I don't understand the problem. You are just trying to flash WM6.5 right?