Related
I have looked all around this forum, google, and youtube. my phone is running on cyanogen 6.1 via nand. I would like to go back to winmo so i can send it back to t mobile because the vibration stopped working. Tutorials, DL links will help.
From the Flashing NAND roms tutorial (link in my signature)
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from *HERE* or a Custom Rom from the HD2 Rom Development Forum (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
Click to expand...
Click to collapse
i think i love you
Yea but that will not remove the HSPL. If you have the latest HSPL you need to open it back up after you load the stock rom and then install the one that is 2.08.0000 at the end of it. Now they will have no Idea. As for the stock rom I just downloaded the one from T-mobile. (www.t-mobile.com/wmupgrade)
Then press the "Thanks" button for him to boost his meter.
i download the stock rom and then how do i do it? im usually an apple guy, im new to android.
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
I am trying todo this on my hd2, to get it back to "stock" wm6.5.
I am having some problems with this. I can get into the bootloader and from my pc initiate the flash. But then it just hangs at 0%.
Anyone got any ideas to what i can do to get it back to "stock" wm6.5 from Android?
Do you still have hspl installed? Are you using the orignal stock rom for your device? Try putting device into bootloader mode first and then connect to your pc, does usb appear on the phone screen when connected?
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
If you're having problems running the flasher executable, try the method mentioned by LiFE1688 above.
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
zatoor said:
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
Click to expand...
Click to collapse
Do you have spl 2.08.0000 or 2.08.hspl installed? You need the latter one if you are flashing a rom which is not officially meant for your phone.
That did the trick. Thank you very much.
zatoor said:
That did the trick. Thank you very much.
Click to expand...
Click to collapse
+1 Thank you!
I tried to reinstall it & my phone turned off. Now it won't reboot. I think it's broken now. Any suggestions?
You will also have to remove HSPL as it is a customized Special Program Loader. Just flash using the .nbh files and that should overwrite the HSPL with the stock SPL. If you use Customruu directly (without modifications) it will not replace the HSPL.
you have to make sure to use a 2gb sd card or less or else it wont work
LiFE1688 said:
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
Click to expand...
Click to collapse
Will this process delete everything from the sd card? Im going to do this process to sell to someone on craigslist and i dont want anything (contacts, texts, pics, etc) to be able to be accessed or seen.
Thanks!
ClydeB1 said:
From the Flashing NAND roms tutorial (link in my signature)
Click to expand...
Click to collapse
I cant find that link,
can you please post it here.
Thank you in advance....
I have HTC HD2 wich I want to rollback to Win mobile, I have androind on it wright now.
Hi,
Today I've tried to install android onto my HD2. After installing 'mgdlr' to my phone it stopped doing upgrades alltogether.
Mgdlr did install correctly but after the reset I only got that white HTC screen.
I know I have to press the power button really long etc etc (I've read the guide thoroughly).
Now, when I try to install anything it doesn't go any further than 0%. Not with any (official) ROM, radio etc.
I've done several hard resets, soft resets and re-installs but nothing gets past 0%.
Does anyone have any clue what happened and why I can't install a ROM and perhaps knows how to fix it?
What are you trying to install? An android rom? Are you going to the flashing mode in magldr? it's option 4 or 5, I think. Magldr was installed successfully? What radio do you have?
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Did you try task29? might help with your upgrading issues.
VioL3nZ said:
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Click to expand...
Click to collapse
Which NAND rom did you use?
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Kailkti said:
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Click to expand...
Click to collapse
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
if your spl is 2.08.0000, first, how did you get magldr to instal since it requires hspl? second, if you removed hspl after flashing magldr (hence 2.08.0000 and not 2.08.hspl as it should be), why?
enter bootloader, does it really say 2.08.0000?
You dont have to press the power button for 'really long' only about 5 seconds, so long as its the right 5 seconds, , , start the phone, first splashscreen appears, just as the first splashscreen is about to end, (after around 5/6 seconds) start pressing power, and keep it held till the magldr menu appears.
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Ive tried task29 but it does the same as any other update. It just wont let me flash anything, it keeps hanging at 0%
silverwind said:
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Click to expand...
Click to collapse
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
VioL3nZ said:
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
Click to expand...
Click to collapse
Ok. Let's start from the very beginning.
Find the CORRECT STOCK ROM first. You go to htc website and use your serial number to download the rom. Make sure your downloaded file is not corrupt.
Get micro sd and use PC to format it to fat 32.
Extract the stock rom and find file with the name: RUU_signed.nbh. Rename it to: leoimg.nbh.
Turn off the phone (make sure battery at least 50% capacity), put your micro sd.
Now, press the VOLUME DOWN BUTTON (don't release it), then press POWER ON button at the same time until white screen appear. Now, follow the on screen instruction.
If you succeed, check your spl by going into boot loader screen.
If your spl is other than spl 3.03, you can continue with next process. Installing SPL 3.03 HSPL.
Then, Do task 29. Then, flash radio 2.15.xx. Then install magldr 1.13.
All process can be done while in the boot loader screen.
If you succeed, you will be brought to mgldr screen. Select option no.5 (USB flasher) and press the green phone call button and connect it via USB, now run the NAND ANDROID you choose from your PC. If fails, retry the process from magldr screen and try different USB port. Also, make sure your anti virus, firewall, and Internet is turn off.
Good luck...
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
VioL3nZ said:
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
Click to expand...
Click to collapse
Glad you solved it
dear please help me too. i had wm 6.5 and android running on my hd2
i want to installa wp7 but when i want to update my radio it stucks at zero
i tried to put the LEOIMG.nbh and did as u said but it stucks at the white screen and says loading.... only
i cant uninstall hspl nor can i use the stock official rom to make my hd2 as normal.
pls help. thanks in advance
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.
It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......
orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???
froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.
Ok basically my phones completely Bricked.
It turns on and shows the HTC Logo and then sits there and does nothing.
I can get the phone into the Rainbow Bootloader however then it won't connect to my computer.
Im pretty sure the phone originally had Android 2.2 however that's all messed up and gone.
Is there a way to completely wipe and then reinstall Android or even the Original WM 6.5?
Im stuck here guys. The phone is a USA T-Mobile Leo.
Cheers
no your phoine is not bricked, if it was bricked it wouldnt even turn on
so you boot intothe boot loader plug inthe usb cable and does it change from serial to usb?
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
joooe said:
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
Click to expand...
Click to collapse
It should be an official rom, shouldn't it ?
kawazaki said:
It should be an official rom, shouldn't it ?
Click to expand...
Click to collapse
Probably yes. Sorry, then.
Either way, he can still download the official rom .exe file and uncompress it with winzip or winrar. After that, he should find the .nbh file and rename it to "leoimg.nbh" and put it in the sd root.
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed.
I also tried doing it from the SD Card the way you guys said to, it worked once, it got to about 3% and said something about Invalid Radio.
I'm guessing this should have worked, however it didn't
Any idea why??
Cheers for your help Guys
PS: When i load into BootLoader mode it does come with with Serial and then USB.
However it also now since the update failed comes up with 'Upgrade ROM Code Error, Please Try Again "
I Get Error Code 284 on the update utility
Cheers
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
pandollar said:
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
Click to expand...
Click to collapse
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
willymanilly said:
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
Click to expand...
Click to collapse
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
T-Macgnolia said:
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
Click to expand...
Click to collapse
ATM My SPL is 2.9
I think it may be corrupt, i took my phone into a phone repair shop and they had no idea how to fix it either.
So does anybody have some detailed instructions on how to do this, id love to get it going!
Cheers
It has to be the radio. If I'm not mistaken you flash the radio just like a ROM.
Here a thread with alot of Radios. Look for the one that says 2.15.50.14 Radio or something similar theres instructions in the thread.
THREAD: [RADIO] The HTC HD2 Master Radio Thread
Good luck!
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
happyhallsy8 said:
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
Click to expand...
Click to collapse
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
T-Macgnolia said:
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
Click to expand...
Click to collapse
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
willymanilly said:
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
Click to expand...
Click to collapse
Ok are you sure you have SPL 2.09 on your HD2 cause it should be one of these?
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
If you have that SPL you might have to flash a older ROM to get another SPL version that will let you flash HSPL as SPL 2.09 will not and I have not heaerd of that SPL so it must have been like a test SPL or something.
Go to "Leo 1.5 T-MOBILE Test & Stock ROMS"and start at the 2,07 ROM, download it and try to flash it via USB and SD card. If no joy, move to 2.09 ROM, if now joy with it move to 2.10.0 ROM and so on and so on until you get one to flash. try both flash methods with both.
Do not, I repeat do not flash or even download for that matter the 2.01 ROM marked not for TMOUS as it will brick/KILL your your HD2!
Recommendations from the SD flash your machine
Hello. I just bought a HTC HD2 really cheap, the only problem is that it is stuck on android logo.
The seller says that after he installed Android on it he was unable to uninstall it and install winmo again. and now it is stuck on android logo and its needed to pull the battery to continue.
That is the info i have got so far (havent recieved the hd2 yet)
Anything u can suggest me to do when i recieve it?
Thanks
Hi lobfredd.
U must be check your HD2 type (t mobile or EU) then check HPSL ready yet (Volume down + power on)
then with HSPL intalled U can format your phone with Task 29 with newest Radio here
http://forum.xda-developers.com/showthread.php?t=1018427&highlight=task
Click to expand...
Click to collapse
Use same way as flash as your rom flashing ^^
after Task29 your phone will be clean, it mean all partition deleted all data and all operation too.
all step for prepairing done
U can flash your Original Winmo Rom (remember chose right rom type EU or Tmous ) or Run Android NAND via MAGDR (search thà forum for useful threads)
Hey, Thanks!
I am pretty sure its EU (Since bought in norway)
I have read somewhere about ppl bricking their phone by flashing radio, is this the case? can i brick it by flashing new radio?
It depends. Really. If it's a TMOUS HD2, you can brick it. But you can't if it's EU.
Don't be surprised if you will see T-Mobile logo on the top - TMOUS HD2s aren't rare, even in EU.
Download a stock Rom from htc.com
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
(after it is done, install hspl 2.08, radio 2.15, clk/magldr, and from cwm wipe data/cache/dalvik cache)
Source
I just got the phone.
When i first turned it on i saw NRG's bootscreen then an android logo (where it became stuck)
I booted into the tricolor mode and saw that it had 3.03HSPL, so i used HSPL4 to install 2.08HSPL instead, when i turn it on now i get into the magldr v1.13.
Should i now do the task29 with radio 2.15?
(btw it was an EU HD2)
So with task29 you delete everything on the cell phone I have is with my htc hd2 android with task29 and then changed with original rom from www.htc.com on win6.5.
If the memory card
I think it may be radio bricked as it always fail on RADIO with when i try SD method with stock rom, or any radio.
however i have managed to get it success with Radio_2_07_51_22_2 and Radio_2_14_50_04.
but i havnt got any closer to booting the OS i think
i heard that if i install a rom without radio it may boot?
any1 know of any rom?
In magload do you have the option to enter clockwork mod?
lobfredd said:
i heard that if i install a rom without radio it may boot?
Click to expand...
Click to collapse
Most of the custom WM-ROMs are without radio.
And also all android ROMs.
I had the same problem with a mainboard.
Was not able to install a radio.
And no FW will boot without radio.
I never found a solution. When radio ist bricked, the mainboard is useless