Database Users

exec goes into continuos loop thing

Just got a s/h exec and I think it is faulty. Whats happens is it starts up ok and works for a while and then for no reason that I can think of it goes into a loop which stops it from working.
When I say a loop I'm not sure thats the right terminology but imagine if you tapped the start button and the start menu opens... and then imagine you tapped the tab button , the next item would highlight. If you tapped the tab button again the next item would highlight and so on. Well its as if the tab button is being hit over and over because all the items in the start menu will be highlighted one after the other over and over again.... it just goes round and round in a loop.
Its possible to escape from this and go to another screen but the same looping will go on in that screen too.
If you switch off and leave for a while and come back to it it works ok for a short time and thens starts the carry on again.
Sometimes if you just wait a while it stops, but will start doing it again even if you dont touch anything.
I've noticed one way to force it to stop is to slide the volume button... this seems to stop the loop and allows normal function for a while.... then the crazy looping starts again.
Has anyone seen this or know anything about it.

Nope sorry, maybe you can have it replaced where you bought it as from your post, you can recreate the problem easily.
Side Note : Have you tried Hard Resetting? Or installing another ROM?

I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !

weegee said:
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
Click to expand...
Click to collapse
Just download a new ROM form imate or something, unpack all the files in the ROM update to a directory, put the attached file in same directory.
Enter bootloader mode (Backlight + Power + Reset Hole) you will see SERAIL on the screen but not backlight so look hard.
Plug into PC, the SERIAL will change to USB
Run the attached file. You will see a photo of an S100 but continue anyway....
Hard reset when finished... DOne

ok have installed latest rom... but exec still doing loop loop

Just for arguments sake, can you try installing Imate's newest ROM?

yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.

weegee said:
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
Click to expand...
Click to collapse
If you have tried different ROM flavors and still get the same problem, then it is definitely hardware related. Send your unit in and demand for a new one not a repair

Just been playing around with it again and notice that I can make the problem happen if i press any of the keys on the navigation pad except the top one.... and i can stop the loop by pressing the light button.
Weird or what.

My initial thought on this is maybe its got wet at some point

I have opened the xda up and stripped it down to all its parts. No sign of any dampness or dust dirt etc. Dont see anything missing or broken.
Put back together, but still doing this.
Driving me nuts.... its a great machine but is very tiresom to use with this going on.
Another think I notice about this machine, I have never used it as a phone, but I tried putting a sim card in and There is no sound through the earpiece. Only sound comes from the speakers when you set it to speaker phone.

I suggest just return it and have it replaced. It's probably a faulty button. Probably gets stuck whenever you press it.

Doesnt need a button to be pressed for it to start.. just starts by itself... and can stop by itself too.
Sometimes it can for ages without doing it, other times it does it all the time.
Cant figure if its hardware or software problem

GHOST-IN-THE-MACHINE

Yea... maybe I should get a priest !

I had this problem when i first got mine, if you move the sound slider down, then up, it seems to stop doing it for a while, and it hasn't happened in the last couple of weeks atall, maybe its because its new, and just needs to settle in?
Jay

Well at least I'm not the only one to have it.
My sound slider does stop it happening but only for a while and then it starts up again.
The machine is perfect in every other way, its just an annoyance I could do without.
I've tried everything, even stripped it down and left parts out, like buttons, to see if they are the source, but no difference.

I have the same problem!!!!!!!!!
Someone help please!!!!!!!!!!!!!!!!!!!!!!!

I have same problem. I send to service but until today they can't repair that problem.

x7501 trouble with wake-up.

I just got my advantage a couple of days ago. i haven't had much time to use it yet, because of work. i haven't installed any sofware. Sometimes my device simpy won't wake-up. After soft feset, the only thing i did was connect a bluetooth headset, which worked fine. I turned off the screen, and when i came back to my device, about two hours later, it would not wake-up. I had to soft reset. This has happened a few times. Also, its very slow with entering text (When i finished typing the word 'text', 'soft reset' was just being entered on the screen.) It would be worse, but i stop to let it catch up, and check for typos.
It is really annoying to buy a new device and have to put up with this crap. Any help is appreciated.

If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter

I'm not having the issues with it not waking up, but recently I've had the issues with randomly occuring extreme slowdown, similar slow text entry, quick battery run down and insanely slow screen redrawing and general responsiveness to hardware of screen based input. I've tried soft resets, hard resets, trying to isolate software that might be causing it. So far it seems that the Illiumsoft Newsbreak feed reader I had been using for months without issue might be related to the problem, but I'm wondering if the problem isn't software specific but actually just related to data downloading activity. Thus far, I'm a couple days in without Newsbreak and no occurances of the problem...

Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ

i am going to hard reset, but with no software installed i dont know that this will help. i am considering switching to the (whats it called, black touch) rom. i dont know f this will help my current issue, but it sure looks nice. on all of my previous devices, i've always used the factory rom, and i'm somewhat clueless and intimidated by the whole process. I just dont want to screw up my new device. if anyone can help with any of these issues, please do.

TrekkerJmm said:
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
Click to expand...
Click to collapse
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.

miterb said:
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
Click to expand...
Click to collapse
Concerning the warranty replacement, i bought this from a guy on ebay. It was still in the sealed box with compusa sticker on it, but i'm not sure if the warranty is transferable. Maybe if i could get him to send his receipt I would covered at least from his date of purchase. Anyone know specifics about the manufacturers warranty?

weaselcossey said:
i've always used the factory rom,
Click to expand...
Click to collapse
Well that's your first mistake...

Confucious said:
Well that's your first mistake...
Click to expand...
Click to collapse
Perhaps you could help me fix that problem by telling me how to install the black touch rom without screwing it up.

I'm obviously no developer, nor expert in any type of computer skills. I come to this forum because I love the device, my issues are usually resolved after some discussion here, the people are mostly friendly, and i'm interested in making my device better. I just need some help to do so.

weaselcossey said:
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
Click to expand...
Click to collapse
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.

bigtsr said:
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
Click to expand...
Click to collapse
i understand that the buttons respond differently depending on how you press them (press and release, press and hold, etc.) The problem is sometimes, usually when i'm working and away from my phone for awhile, the device simply won't wake-up (power button or any other button pressed in anyway does nothing.) after a soft reset eveything seems fine. this has probably happened 4-5 times in 3 days. After hard reset its only happened once.
Sometimes my device doesn't seem to respond when i plug in the charger, nothing lights up. I've also noticed everytime i check .the battery meter, its alway a denomination of 10 (10%, 20%, 30%). I was sure this was going to be a great device, but i'm beginning to have my doubts.

weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.

eaglesteve said:
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
Click to expand...
Click to collapse
i'm using wm6, i'm currently using the factory rom on my advantage x7501, but planning to upgrade this evening.

Leo won't boot anymore

Hi everybody!
Just got my Leo two days ago and I was bombed. Had a 4350 before and you can imagine what big a difference that is. But now this occured and I really don't know what the heck is going on here. Without any reason the Leo froze after not using it for two hours, just an active sync connec. So I grabbed it and it was frozen. Thus i did a soft reset. When it rebooted, for some reason it seemed like the first time I started the device, asked me for the time and google settings etc. Very confused. But then I came to the Homescreen, which was blank, just like after a hard reset. Ok, I thought. This is nasty but all my stuff was backed up, so what. I tried to switch to the settings panel and found it ultra super slow and the settings panel wouldn't even appear on the screen, just the title on top. I thought, this is wrong, very wrong and decieded for another soft reset. And now it won't boot at all. It stands still in the screen where it shows this pink circle and the RUU and whatnot version.
I am speechless. It just doesn't start, tried it like 4 times now. I didn't update RUU or anything since this thing is T-Mobile branded and it wouldn't let me. I tried it this morning but just got the error in windows that my device won't allow... After that I took it for a 3 hour ride outside and used it for like 10 more hours. And now this!
Has this ever occured to anyone else around here?
Any suggestions? I'm quiet angry right now, think I gonna return it tomorrow. Hopefully they don't say I tried to flash it or whatever since I did not. Cannot explain this to me.
Regards,
Zoimt

hi sounds like bad news have you tried a hard reset

Do a hard reset, press the up and down volume then at the same time press the power button. Keep all three pressed for about three seconds and a hard reset will start. If it happens again you have a faulty device.

I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did

zoimt said:
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
Click to expand...
Click to collapse
Take the battery out then put it back in. Once it's in press all three buttons at once until you see the hard reset begin. It will ask you to confirm by pressing the up volume button.

Oh boy! It started again! I thought I tried to hard reset it with the key combo you also adviced me and nothing happened but this time it worked. Thus I assumed it only works at a later point in the boot process. But thanks for showing me the opposite!
Man, this takes a load off my mind, thanks! Just hope this was a one time thingy and doesn't occur every 28 hours again.
Regards,
zoimt

HD2 frozen on boot

I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???

sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.

Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.

if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.

No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??

can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?

Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.

Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.

Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works

Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB

Have you tried a boot (all combinations!) without the sd card installed?

Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....

PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.

In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.

rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.

Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!

I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.

watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.

i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile

fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.

Is my touchscreen dieing?

I was running an older Paramid version of dunphp's ROM, and right before swtching the ROM my touch screen start to not function. I could not pull the ring up to unlock the screen. I rebooted multiple times. Cleared Dalvik and fixed permissions. It finally worked after attemptiing to unlock it for what seem like abother 500 times.
I was going to change over to his latest Deisre HD ROM anyway. So I did a Task 29, and cleaned and reinstalled everything from scratch. It worked perfectly for about 5 days. Now I am getting the same issue with my touch screen. It just seems to go out. Is this typically what happens when it's about to die?

Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...

cmajewsk said:
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
Click to expand...
Click to collapse
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.

lolkoz said:
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
Click to expand...
Click to collapse
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.

cmajewsk said:
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
Click to expand...
Click to collapse
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.

lolkoz said:
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
Click to expand...
Click to collapse
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.

cmajewsk said:
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
Click to expand...
Click to collapse
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers

lolkoz said:
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
Click to expand...
Click to collapse
How long do you hold the red button? Also, I am pushing down really hard. I didn't know you could get the digitizer replaced...I wonder who would do that (no way would I send it to HTC and wait a month), and how much that costs...?

HTC sends phones back crazy quick. Atleast that's how it was for me. They actually sent it back the day they got it from what I remember. It did take a while though for the phone to arrive to HTC (this depend who and from where you send it though) If your phone still has warranty I seriously recommended you send it yo HTC. Just remember to flash it 100% stock before sending it.
Sent from my HD2 using XDA App

Well believe it or not, after pressing the Red phone off button for an eternity and applying a ton of pressure, it's working. I am sure it won't be for long. I have a shortcut to lock the phone on the screen. So basically your saying I should stay away from hitting the Red phone off button, or else that will kill it again? What about the other hard buttons?
I am in the UAE at present, so it might be better for me to just order a digitizer and do the repair myself. I see there are a lot of YouTube videos on the subject.
Thanks everyone for your help!