I was running an older Paramid version of dunphp's ROM, and right before swtching the ROM my touch screen start to not function. I could not pull the ring up to unlock the screen. I rebooted multiple times. Cleared Dalvik and fixed permissions. It finally worked after attemptiing to unlock it for what seem like abother 500 times.
I was going to change over to his latest Deisre HD ROM anyway. So I did a Task 29, and cleaned and reinstalled everything from scratch. It worked perfectly for about 5 days. Now I am getting the same issue with my touch screen. It just seems to go out. Is this typically what happens when it's about to die?
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
cmajewsk said:
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
Click to expand...
Click to collapse
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
lolkoz said:
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
Click to expand...
Click to collapse
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
cmajewsk said:
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
Click to expand...
Click to collapse
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
lolkoz said:
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
Click to expand...
Click to collapse
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
cmajewsk said:
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
Click to expand...
Click to collapse
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
lolkoz said:
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
Click to expand...
Click to collapse
How long do you hold the red button? Also, I am pushing down really hard. I didn't know you could get the digitizer replaced...I wonder who would do that (no way would I send it to HTC and wait a month), and how much that costs...?
HTC sends phones back crazy quick. Atleast that's how it was for me. They actually sent it back the day they got it from what I remember. It did take a while though for the phone to arrive to HTC (this depend who and from where you send it though) If your phone still has warranty I seriously recommended you send it yo HTC. Just remember to flash it 100% stock before sending it.
Sent from my HD2 using XDA App
Well believe it or not, after pressing the Red phone off button for an eternity and applying a ton of pressure, it's working. I am sure it won't be for long. I have a shortcut to lock the phone on the screen. So basically your saying I should stay away from hitting the Red phone off button, or else that will kill it again? What about the other hard buttons?
I am in the UAE at present, so it might be better for me to just order a digitizer and do the repair myself. I see there are a lot of YouTube videos on the subject.
Thanks everyone for your help!
Related
Just as i said - Argh! The screen is no longer responsive. What to do? I can no longer slide the lock across the screen. i have tried to flash the ROM with the 1.66 official but i cannot because it tells me to unlock the phone. I cant! argh! I've pushed the little red button by the battery a couple of times as well as removed the battery. Any suggestions? The hard buttons allow me to answer a call but that's it. i recently turned on the lock for the phone (today in fact) but I've unlocked it several times since doing so before this happened.
Sounds familiar...
Sounds like it is the same problem I had, as well as a few others on this forum. Even after a hard reset, it still didn't work. According to other people here, the solution is to have the screen swopped out for a new one. I've actually just sent mine in today to get it sorted out.
Just curious - I've got a suspicion that environmental conditions may have a role to play in causing the failure. What is the weather in your area like?
Very nice here today. Sunny, mid 50s(f).
I bought this off of ebay. Do i just send it in to HTC?
Try a hard reset, and if it doesn't help then make sure you have an official ROM and send it to HTC.
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
I would really like to wipe it before i sent it in. i dont want all my info, etc going into someones hands i dont know. anyway to do that?
No, that's a soft reset. Hard reset is pressing the red button while holding both volume keys until you get the "Restore factory settings?" prompt (when the device is on), then following the onsceeen instructions. This is what you're looking for to erase everything, including any possible software bug that could have caused the issue.
If the touchscreen still doesn't work then, send it in.
lythe123 said:
a hard reset is the little red button next to the battery, correct? ive done that.
and i cant very well change the ROMs at this point now, can i?
Click to expand...
Click to collapse
No! A hard reset is:
- Turn phone off
- Press vol up and down at the same time and then press power button (hold vol)
- follow the instructions on the screen
Be aware, that all you data on the phone will get lost. I recommend taking out the SD for that as well. After that u r done. By what you say i assume, that you didnt flash a custom ROM yet, right ?
Thanks! that didnt work either though.
I just want my money back now honestly. This thing, as pretty as it is, is just too much trouble.
Sorry double post...
A faulty device can happen to anybody, just bad luck... can't count how many times it has happened to me as well in the past.
I heard that there is a batch of phones that have a faulty screen, other problems are that without pressing anything the phone still registers clicks, phone doesn't always detect the correct place of where you pressed and the screen not responding.
I have got this on my phone and have arranged a pick up from HTC to pick up my phone for repair, hopefully in a week or two it will come back with a brand new screen that works
Ive had it a couple of months now. Im not sure if i can deal with the lack of apps that my iPhone has, pandora and the like, and the fact that teh HD2 would every so often change time and even date and i cant get weather in places my iPhone can.
In short, i love the HD2 for its specs but i no longer trust it at all.
So recently my HTC HD2 touch screen has been working on and off.. Sometimes it would work and sometimes it dosen't?? I have searched on Google for help but everyone gets different answers on how to fix it. Some say its a hardware problem, others say it is a Rom thing, and most say just send it back to HTC or your provider to get it fixed. But I dont have a warranty on mine anymore, and I live in Canada & use rogers, so they don't carry the phone?? So I am really stuck and have thought of a couple solutions but would like to ask you XDA forum people if it has worked for you??
I was thinking mine is a digitizer problem so I post some pics here to ask if anyone else gets these problems? and if so how it might be fixed
I also thought of buying a new Digitizer from ebay and replacing mine?? has anybody that and been successful with that??
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=350480051781&category=43304&_trksid=p5197.c0.m619
Thank You for reading and taking your time to help me
The pictures at the bottom if you notice the opinion menu should not have a selected silent mode when I haven't pressed it. and the home screen should not have the light blue button lite up because I haven't pressed it?? (its in the corner of the screen) and the last pic if i am correct the "turn on usb storage" should not be blue it should be white since i haven't clicked it..
Did you find a solution to your problem? The same thing happened to my sisters phone just recently. Did replacing the digitizer work for you? Somewhere I read that pressing the end button hard enough to 'nudge' the digitizer (which is located under the end button) fixes the issue. For how long and how much truth is in that? I don't know haven't tried it.
hey!
i had the same exact problem, my htc suddenly stopped working (touchscreen) and it was weird because I never spilled any water on it, so I tried what you said, pushing hard the red button and it worked! at least it worked for me
pressing hard on the end button works for me
Hi thanks for the tip. this works for me for now...
wonder is this a sign that it is going to wear off soon.
CRAZY!!!! It worked!
Wow! Thanks alot for the tip, screen fixed again..
Where id this red button?
I think it is or POWER button or red small restart button under battery cover.
kubekpop said:
I think it is or POWER button or red small restart button under battery cover.
Click to expand...
Click to collapse
its the red end call/ power off button
and the suggestions above work perfectly cause i have that problem
it worked!!!!
At first this sulotion seem like a joke...but it WORKED!!!!...
But for me pressing hard enough is not hard enough..so i press using my teeth..like bite it ...
And it worked...
i had this problem today
i stripped the phone down and the flex cable was not connected properly so i pushed it all the way in and now the screen is fully working,
only bad thing is that i snapped the volume flex cable so now i cant navigate through magldr ???
ex5dream said:
At first this sulotion seem like a joke...but it WORKED!!!!...
But for me pressing hard enough is not hard enough..so i press using my teeth..like bite it ...
And it worked...
Click to expand...
Click to collapse
I am amazed that this actually worked! I pressed it with my teeth a few times and the screen is now fully working again!! Before I found this thread I was on the phone with T-Mobile already setting up an exchange for a new phone. Which normally they would send you a new HD2 but T-Mobile no longer has the HD2 so they make you choose from the LG MyTouch, Samsung Exhibit 2 and the HTC Radar. I was soooo ****ing pissed because none of those phones are customizable like the HD2. I did a hard reset on my phone so now I'm redownloading all my apps...pain in the ass but at least I get to keep my phone.
---------- Post added at 05:24 PM ---------- Previous post was at 04:54 PM ----------
TrevorMcCauley said:
I am amazed that this actually worked! I pressed it with my teeth a few times and the screen is now fully working again!! Before I found this thread I was on the phone with T-Mobile already setting up an exchange for a new phone. Which normally they would send you a new HD2 but T-Mobile no longer has the HD2 so they make you choose from the LG MyTouch, Samsung Exhibit 2 and the HTC Radar. I was soooo ****ing pissed because none of those phones are customizable like the HD2. I did a hard reset on my phone so now I'm redownloading all my apps...pain in the ass but at least I get to keep my phone.
Click to expand...
Click to collapse
Okay, I might have gotten excited too soon. Cause now the touch screen is on and off working...I don't know what to do. I don't want a ****ty new phone. I want my beloved HD2.
it worked for me too...awesome thanks yall
EDIT: worked temporarily for me, touchscreen stopped working after few minutes
Mine is on/off working but I've found that screen works as long as end button is not used, when I use the red button I have to wait until it sleeps to wake it with any other button instead. Maybe a couple of times before finally get it to work.
Don't know if its related. Thanks in advance.
Sent from my HTC Glacier using xda premium
TrevorMcCauley said:
I am amazed that this actually worked! I pressed it with my teeth a few times and the screen is now fully working again!! Before I found this thread I was on the phone with T-Mobile already setting up an exchange for a new phone. Which normally they would send you a new HD2 but T-Mobile no longer has the HD2 so they make you choose from the LG MyTouch, Samsung Exhibit 2 and the HTC Radar. I was soooo ****ing pissed because none of those phones are customizable like the HD2. I did a hard reset on my phone so now I'm redownloading all my apps...pain in the ass but at least I get to keep my phone.
---------- Post added at 05:24 PM ---------- Previous post was at 04:54 PM ----------
Okay, I might have gotten excited too soon. Cause now the touch screen is on and off working...I don't know what to do. I don't want a ****ty new phone. I want my beloved HD2.
Click to expand...
Click to collapse
For everyone with this problem, It means that your hard buttons are wearing out, getting sticky. Its like if the esc key on a keyboard gets stuck, nothing can be done because it keeps esc'ing, well the same applies here on the HD2. Sh*t happens. Sorry.
I love this forum
I LOVE U ALL
COZ UMKE MY PHONE COMES ALIVE , & ME 2
THANK U ALL SOOOOOOOOOOOOO MUCH
thank you for above information
Thanks a lot, htc hd2 is in live again!
Thanks a lot, Htc hd2 is in live again!
After experiencing the same issue, I was also ready to buy new one, maybe Htc Desire HD.
I was running MIUI GB, I done hard reset several times, I downgrade the phone to W6,5, but nothing Happen, I went to HTC but the phone wasn't anymore under waranty and they ask me €240.00 to fix it, then I decide to change by myself the touch screen + Digitizer €45.00 average on Ebay, and/or keypad key button flex ribbon cable parts €7.00 average on Ebay.
And then waiting for the parts I'd just install Screen off an d Lock Apkdecided to don't use anymore the power red button until that I saw this thread. To simple to be true, but I tried, and it works, not every time but most of the time.
So it is just to change the keypad key button flex ribbon cable parts €7.00 average on Ebay.
Thanks again to all of you.
Screen Issues
My screen froze up occasionally as well. Seemed like more of a software issue rather than hardware; however, when I replaced the screen it went away completely.
cannot beleive it worked
pushed really hard on tghe call end button and now the key touchscreen works. God bless the internet.
So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???
AEBobby912 said:
So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???
Click to expand...
Click to collapse
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk
Try to install everything from scratch and how it goes.
Sent from my HTC HD2 using XDA App
10507 said:
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
Try using zMooth or Button Savior. This help your hardkey a lot. Since I have zMooth and Button Savior install on my phone, I no longer have to use the hardkey.
AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
for how long (holding of power button) ????
{edit}
!!!!! FIND SOLUTION !!!!!
The digitiZer is under the hangup button. press the button bit hard till it nudges the digitiser a little. it worked for me.
(found it from : http://www.htcphones.net/htc-hd2-problems-with-touchscreen/ )
I'm so cool now!!
I have been living on this solution for almost 2 months now.
However I can't take it anymore not because I am lazy!
but because when sometimes you need to make a quick call or grab that
camera instantly I tend to waste a good 5 minutes trying to make that hardpress on the end key work with the digitizer cable.
My question is, would changing the digitizer work? or is it something else?
Ever noticed that T-Mobile HD2 has soldered digitizer connection to the LCD vs. flex-cable socket in standard Leo?
My power button has been malfunctioning for about 2 months now. That isn't to say it is 100% dead, but at times it'll work if I smack the button about a few times, and sometimes it will be completely unresponsive. I have read up on the subject and found a thread with a response from a guy claiming to be an engineer who said the micro switches they use in these phones are somewhat weak and only work for a limited number of presses. Recently, I changed roms, and to my surprise the power button worked great for a short period of time. Since then, I've found that when my power button starts acting up, wiping the dalvik cache put it back to normal. This lead me to thinking, and I've come to believe it could very well be a hardware problem that is meant to happen. I am by no means a coder/programmer but I have studied it enough to know that certain code can be written for a device that sets a "timer" for a piece of hardware to die out or malfunction. If that's the case with this, then it makes sense somewhat that wiping the dalvik cache resets this timer for a short time. Anyone have any thoughts? Am I crazy tinfoil hat wearer or does this make some sense?
knarfrabot said:
My power button has been malfunctioning for about 2 months now. That isn't to say it is 100% dead, but at times it'll work if I smack the button about a few times, and sometimes it will be completely unresponsive. I have read up on the subject and found a thread with a response from a guy claiming to be an engineer who said the micro switches they use in these phones are somewhat weak and only work for a limited number of presses. Recently, I changed roms, and to my surprise the power button worked great for a short period of time. Since then, I've found that when my power button starts acting up, wiping the dalvik cache put it back to normal. This lead me to thinking, and I've come to believe it could very well be a hardware problem that is meant to happen. I am by no means a coder/programmer but I have studied it enough to know that certain code can be written for a device that sets a "timer" for a piece of hardware to die out or malfunction. If that's the case with this, then it makes sense somewhat that wiping the dalvik cache resets this timer for a short time. Anyone have any thoughts? Am I crazy tinfoil hat wearer or does this make some sense?
Click to expand...
Click to collapse
I AGREE! I thought it broke a while ago but I did a complete wipe and put a brand new rom on it. Heck I almost sent it to Sammy but for some reason it stared working. I dont think its the dalvik cache though. I have a feeling its ClockworkMod Recovery because sometimes it says a key was disabled and I had problems after that. I couldnt lock my phone.
knarfrabot said:
My power button has been malfunctioning for about 2 monthsnow. That isn't to say it is 100% dead, but at times it'll work if I smack the button about a few times, and sometimes it will be completely unresponsive. I have read up on the subject and found a thread with a response from a guy claiming to be an engineer who said the micro switches they use in these phones are somewhat weak and only work for a limited number of presses. Recently, I changed roms, and to my surprise the power button worked great for a short period of time. Since then, I've found that when my power button starts acting up, wiping the dalvik cache put it back to normal. This lead me to thinking, and I've come to believe it could very well be a hardware problem that is meant to happen. I am by no means a coder/programmer but I have studied it enough to know that certain code can be written for a device that sets a "timer" for a piece of hardware to die out or malfunction. If that's the case with this, then it makes sense somewhat that wiping the dalvik cache resets this timer for a short time. Anyone have any thoughts? Am I crazy tinfoil hat wearer or does this make some sense?
Click to expand...
Click to collapse
well, you solved your own theory in your statement. since when does smacking your phone equate to a software issue? my power button went in august, mostly. it started showing the behavior that you described about 4-6 weeks beforehand. i say mostly, because the physical button doesnt work anymore(rarely a response from it). but ive figured out how to work it to my advantage/needs. i can wake my phone by shaking it now, and put the screen to sleep. also can be done with a light smack in the right place on the back of the phone. but to be practicle, i remapped my search button to use as a power button and wake my phone with the volume button. really, the only hard part is navigating in the bootloader menu since the volume buttons wont work there with the power button broken. so ive learned to work it by lightly, very lightly, tapping on a certain place on the back of the phone near the power button. this "loosens" the volume buttons and lets me navigate the menu. then i tap the phone again to make a selection. this in no way indicates a software issue/conspiracy to me. when it just started displaying this behavior, i thought it might be a software issue too. but it turned out to be all physical damage.
You know, the funny thing about when it stops working is that it's never all at once.
It's a degrading process of malfunction until it takes repeated button pressing, not so much force, to work. After that it works so seldom that I'm forced to do something about it. It's for those reasons I think it's something more than a hardware problem.
From your experiences, even after a full wipe/new rom installation, your power button still doesn't work, if only for a brief time?
P.S. The new touch based recovery from team win works really well for those of us who can't use our power buttons
Sent from my Nexus S 4G using xda premium
@simms22
Hmm my guess is that there are multiple issues that result in a malfunctioning power button. Props to remapping your search button to lock your phone. It would be a great work around if my phone ever had this problem again. Have search to lock the phone and volume keys to wake it. I'm unsure how you remapped your search button though. Maybe you can tell me how?
knarfrabot said:
P.S. The new touch based recovery from team win works really well for those of us who can't use our power buttons
Click to expand...
Click to collapse
Agreed! If you have no access to a computer with adb/fastboot control the touch ClockWorkMod recovery would be very useful.
knarfrabot said:
You know, the funny thing about when it stops working is that it's never all at once.
It's a degrading process of malfunction until it takes repeated button pressing, not so much force, to work. After that it works so seldom that I'm forced to do something about it. It's for those reasons I think it's something more than a hardware problem.
From your experiences, even after a full wipe/new rom installation, your power button still doesn't work, if only for a brief time?
P.S. The new touch based recovery from team win works really well for those of us who can't use our power buttons
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
ive been using twrp recovery for a while. even the non touch version has a no power button option. but i dont believe that theres anything else but hardware issues here. it is a degradation. at first it comes and goes, later it mostly just comes( ) and doesnt go. i can even hear a slight rattle in the power button area now if i shake the phone.
about after flashing.. at first, 50% of the time it would work after flashing, but it was just coincidence. but now no. btw, i flash many times a day, even then when it first started acting funny. flashing, wiping, it just doesnt make a difference, its coincidence.
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
Tw1tchy said:
@simms22
Hmm my guess is that there are multiple issues that result in a malfunctioning power button. Props to remapping your search button to lock your phone. It would be a great work around if my phone ever had this problem again. Have search to lock the phone and volume keys to wake it. I'm unsure how you remapped your search button though. Maybe you can tell me how?
Agreed! If you have no access to a computer with adb/fastboot control the touch ClockWorkMod recovery would be very useful.
Click to expand...
Click to collapse
ButtonRemapper app, available here on xda for free http://forum.xda-developers.com/showpost.php?p=9399440&postcount=1
you want v0241. i have all the power button functionality with my search key except waking the device(volume rocker wakes my device). short press screen off, long press power menu, long press plus volume down for screenshots.
@tw1tchy, I totally agree it is multiple factors, which is why I can only speak for myself based on my experiences, although your overall experience seems to be similar to mine.
@simms22, I have never noticed a rattle in my phone, its likely that you and I have different causes attributed to the power button failure.
Not trying to beat a dead horse but just for the sake of being thorough, have you tried ODIN? I noticed a substantial difference when I ODIN'ed back to stock.
Sent from my Nexus S 4G using xda premium
Me everytime I drop my phone on concrete my battery door opens and the battery falls of my phone...And you know what's the most odd part ...I get scratches on my phone when I pick it up .....Does anyone else gets this ??
Envoyé depuis mon Nexus S avec Tapatalk
I really like my Nexus S, but I kinda hope this power button self destruct kicks in soon. I see it as a feature - to make buying a Galaxy Nexus easier to justify. Good looking out Sammy.
I've had a similar problem for the last 4 months or so. It started when I dropped my nexus without the cover onto concrete floor. Not good I know.
But anyway...ever since then the power button been funny. Sometimes it didn't work at all and I couldn't turn the screen off and on. It was really bad. It took a while but now I kind of know how to handle it. Still annoying mind u.
Basically with mine the trick is to press the button really really hard towards the top end and it works fine. I've also noticed what some others are saying about changing rooms and doing resets etc. It seems to help as well.
But yeah...I still love my nexus. Lol. I think by me dropping it is the reason for my problems. It probably landed badly and loosened some part of the connection in that section or something. But as I said...all Is good now that I know the trick to it.
Sent from my Nexus S using XDA App
I've had my NS since Christmas Eve 2009 and the power button completely stopped working 2 days ago. I did notice over the past few weeks that it wasn't responding properly. TBH, my NS has been through a LOT in the past 14-months (multiple impacts, spillages, kids etc), I'm surprised it's lasted this long
I'm now using the ButtonRemapper app to use 'search' as the power button. Works great! Plus my volume keys wake the phone up so all is ok.
I love my NS and wish I bought another one when CPW had them for £150 sim free!
It might be time for me to let go of the NS , just have to decide which phone is next (but thats for another thread lol)
ugh mine is under a year old. im very angry that this happened so quickly. im gonna try giving samsung a call. hopefully the will replace it. i shouldn't have to hack my phone in order to make it usable.
@rener78 You seem to have a vast misunderstanding of how sarcasm works. Just as future reference, posting dry, tasteless irony up on the internet as a smart-mouthed statement of ill will is about as practical as a chocolate teapot.
@staplebox Lol! Well played, sir or madam. I can't say posting a thread containing the words conspiracy theory doesn't grant me at least a well placed snarky comment. Although to be fair, I was kinda bored when I wrote it.
@ALL Yes, I get it, we've all dropped our phones before. I guess I expected a bit more from Sammy since my little old HTC hero that I beat halfway to hell is still going strong, while I pampered this nexus and its already giving me problems >1 year in but that's a whole different discussion I suppose.
Sent from my Nexus S 4G using xda premium
great mine just went out yesterday... had mine for a ltl over a year now.
No tapping certain areas or anything works.
I did notice it slowly degrade over the past few weeks.
I used the fix my power button app so my volume keys wake up my phone, but sometimes after using that 5 or 6 times it will stop working too so i have to plug my phone in the charger to turn it on. Is there another way of getting the volume keys to act as a wake button??
edit: i'm gonna try out that button remapper i saw in an earlier post.
tankmaster90 said:
great mine just went out yesterday... had mine for a ltl over a year now.
No tapping certain areas or anything works.
I did notice it slowly degrade over the past few weeks.
I used the fix my power button app so my volume keys wake up my phone, but sometimes after using that 5 or 6 times it will stop working too so i have to plug my phone in the charger to turn it on. Is there another way of getting the volume keys to act as a wake button??
edit: i'm gonna try out that button remapper i saw in an earlier post.
Click to expand...
Click to collapse
if you are using an ics rom go to the main settings, security, lockscreen.. now disable the lockscreen. you can now wake your device with the volume button. its a feature built into ics.
interesting did not know this. Thanks, I think I'm still gonna use the button remapper to change the function of the search key to the power so I can reboot and stuff and go into recovery and such easier since i'm running cm9.
tankmaster90 said:
interesting did not know this. Thanks, I think I'm still gonna use the button remapper to change the function of the search key to the power so I can reboot and stuff and go into recovery and such easier since i'm running cm9.
Click to expand...
Click to collapse
thats what i do. my search button has all the features of the power button but being able to wake the device.
Here's another question what if i need to pull the battery?? I'm rooted and running CM9 what if i go into a boot loop and i need to pull the battery with no charger around (i know how to do it with a charger) would the button remap solve this?
tankmaster90 said:
Here's another question what if i need to pull the battery?? I'm rooted and running CM9 what if i go into a boot loop and i need to pull the battery with no charger around (i know how to do it with a charger) would the button remap solve this?
Click to expand...
Click to collapse
no. the button remapper app doesnt do anything when off or the screens off. honestly, i no boot many times a week(because i test the trinity kernel as its being developed before release), ive figured out a system of light taps near the power button to let the volume buttons let me scroll, and to select in the bootloader.so for me its a non issue. to power up from being powered up, i dont do anything. a, pluging in powers it. b, tapping the back powers it when no usb is available. c, it powers up by itself usually, seconds to a few minutes after powering off.
Being a heavy user of my nexus s since July 2011, the power button died last Sunday.
One of the most important problems i had after that was that i was unable to lock bootloader before giving the mobile to samsung service, because the stuck power button caused problems to fastboot commands and the bootloater usage(menu) in general.
Finally i decided to go to the service and give the phone. The result was that in about an hour they replaced the button and gave me back the mobile. The repair was covered by the 2 years warranty and the unlocked bootloader did not cause any problem to that.
Up to now i have a "brand new" nexus s and i hope that the new button will last much longer.
Hi there guys
I am running sensation xl rom 5 months now. I am running custom android roms about two years now so I am not a complete noob.
As I was playing with backgrounds themes etc, just for a new feeling, I installed GO Launcher from market and few themes. I then noticed that the phone was becoming progressively unresponsive. Sometimes I had to press twice or wait and press again. At a point the phone became completely unresponsive. I thought that maybe the launcher did something bad to the rom so I did a clean install of the rom again. The rom was booted normally and when I reached the point were I needed to configure the rom by touching nothing happened.
Up until then I was thinking that there was something wrong with the flashing rom so I flashed another trustworthy NDT MIUI rom that I was using for over 8 months without any problems. However the exctly same thing happend when I reached the point to enter the pin the screen was unresponsive. I even went back to the original win mobile 6.5 rom (eek) but no luck.
The phone has never ever had a drop. It doesn't have a screen protector but it is good as new.
Any ideas?
Do you think that I have to replace the screen?
Please guys help, I love my HD2
It seems that your screen is dying - what is unfortunately typical in HD2. Topic was discussed many times here on xda, look for it. It also happened to me. Replacing the screen is the solution, but first you should try HR, and try to avoid pressing right (hang up) button
rexx87 said:
It seems that your screen is dying - what is unfortunately typical in HD2. Topic was discussed many times here on xda, look for it. It also happened to me. Replacing the screen is the solution, but first you should try HR, and try to avoid pressing right (hang up) button
Click to expand...
Click to collapse
thnx for the reply,
i looked before posting but nothing really helped me. Do you think that it is a coincidence that problems started when i installed the GO launcher?
Also I tried HR but nothing changed
And in the case you will have to change the touchscreen, be careful. Some new and some Chinese touchscreens are not supported by Android's kernel
try pressing alternately and simultaneously the power and call button
The "pressing the power button" trick worked but then stops working and then again and so on....Temporary fix.
I went to the HTC service and they asked 164 euros to change the screen's digitizer. No-way...
Thanx for the replies guys
HD2_TTs said:
The "pressing the power button" trick worked but then stops working and then again and so on....Temporary fix.
I went to the HTC service and they asked 164 euros to change the screen's digitizer. No-way...
Thanx for the replies guys
Click to expand...
Click to collapse
Interested in buying it : PM me if interested too!
bib*oops said:
Interested in buying it : PM me if interested too!
Click to expand...
Click to collapse
you have a pm