USB Sync - Touch Pro2, Tilt 2 Themes and Apps

I have searched this forum, found some Sync issues but nothing that relates directly to my issue. If I just didn't see it, point me in the right direction please!
I have a TILT2, stock ROM, I have made some reg mods for text msg notification, Data speeds & auto rotate via G-Sensor. My phone was syncing perfectly fine for a few weeks and I have the USB to PC "Enable Faster data sync" unchecked.
I lost sync a few days ago, I rebooted phone & computer figuring that would fix it as it has in the past only to find I only get charge light, no data connection. I don't hear the bum-bum audio indication that it is connected, and the device does not show under Device Manager nor mobile device manager and my connection methods include USB & Bluetooth.
Here is the caveat, I can sync to the computer through my bluetooth on my PC and I do hear the audio tone connection. I figure a reg change affected this, but I reviewed my changes, nothing dealing with USB, and I even reverted back to a Reg backup from prior to the problem occuring - no luck. I have swapped USB cords, nothing has helped.
Does anyone know of registry setting that would disable my USB sync? Do I have a defunct device?
Assistance appreciated - Dan

djwinn said:
I have searched this forum, found some Sync issues but nothing that relates directly to my issue. If I just didn't see it, point me in the right direction please!
I have a TILT2, stock ROM, I have made some reg mods for text msg notification, Data speeds & auto rotate via G-Sensor. My phone was syncing perfectly fine for a few weeks and I have the USB to PC "Enable Faster data sync" unchecked.
I lost sync a few days ago, I rebooted phone & computer figuring that would fix it as it has in the past only to find I only get charge light, no data connection. I don't hear the bum-bum audio indication that it is connected, and the device does not show under Device Manager nor mobile device manager and my connection methods include USB & Bluetooth.
Here is the caveat, I can sync to the computer through my bluetooth on my PC and I do hear the audio tone connection. I figure a reg change affected this, but I reviewed my changes, nothing dealing with USB, and I even reverted back to a Reg backup from prior to the problem occuring - no luck. I have swapped USB cords, nothing has helped.
Does anyone know of registry setting that would disable my USB sync? Do I have a defunct device?
Assistance appreciated - Dan
Click to expand...
Click to collapse
Is this of any help to you?
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting

Thanks for the link - I had found this before, and it really deals with no connection at all. I ran through most of the post, nothing helped. Considering I have sync via Bluetooth, it is not firewall.
Looking at restoring my computer to sometime last week, see if an update that came through caused this.
I'll post more when I done the restore.

OK - Update. I restored my PC to prior to issue, no luck. I disabled my security suite, no luck. I have tested the phone on another PC, it acts the same. communicates via bluetooth, but only charges via USB.
I am starting to work my way through the phone registry, is there any specific setting I should be looking for?

I'm just going to throw in a suggestion here: have you tried using a different cable? Often times the cable is the bad piece of the connection, but people don't even think to switch it out with another one.

And as well as the cable, have you tried a hard reset on your phone?

same problem!
i have the same problem. went to htc and they told me sorry you have a 3rd party rom so we are not going to help you.
yes i have treid 4 other pc's and 3 difrent cables and no luck.
please help!!!!!

Ferdi_H said:
i have the same problem. went to htc and they told me sorry you have a 3rd party rom so we are not going to help you.
yes i have treid 4 other pc's and 3 difrent cables and no luck.
please help!!!!!
Click to expand...
Click to collapse
I had the USB port go out on my TP2. I used the SD card to flash the sock hard SPL and then used the SD card to flash the stock T-Mobile ROM. Then I sent it in for warranty exchange. I suggest that you do this and then seek help from HTC.

cool can you perhaps help wit how to do it? please?

Ferdi_H said:
cool can you perhaps help wit how to do it? please?
Click to expand...
Click to collapse
Instructions are in this Forum:
http://forum.xda-developers.com/showthread.php?t=550540
Reversing hard SPL is here:
http://forum.xda-developers.com/showthread.php?t=649191

same problem here and the problem that the battery was draining even when the phone was off. call htc and the next morning the ups was at mine house to get the phone. 7 days later the phone was back with new motherboard. a had started a tread in general of this problem

Yep, mine too. I had to send it back to HTC UK for repair after the USB socket stopped working - came back with a new mainboard.
It looks as if it's prone to failure as I'm careful with connecting and disconnecting cables and it looks as if this one is already starting to go again!
Can't fail HTC UK Repair for it's great service though...

Related

can't sync. with my laptop

Hello All,
I don't know what is the problem. It seems ok for the first time after i installed the version 4.0 that comes with the CD. It works fine. But for the second time, it just 'connecting'. Have gone thru' the troubleshooting processes but without success. Also tried to install the new version 4.1 but won't work.
Pls can someone help me on this.
rgds.
zainal.
does it sync over BT?
i had the same problem before & i still do, but soem other guy here in the forum said it worked for him when he uninstalled AS then reinstalled it again.
try it, it might work with you.
until now i'm still stuck with BT syncing, i cannot sync over USB.
i still get "connecting" message all the time with no progress.
Hi Guys
I had EXACTLY the same problem, alhough I could not get BT to work but could get IRDA to work.
Here is what I THINK the problem is, by the way i-mate were useless it was a colleague at work that had finally found this problem on his device.
WM5 devices when connecting via USB create a NETWORK. Strange but true.
SO, open Control panels, open Network Connections.
Attach your K-JAM (or other WM5 device) you SHOULD see a new network get created with a random number at the end of it (the number changes depending on the USB port you use so you MAY need to do this procedure again if you connect via a different USB port).
Get the properties of this new network when it opens you should see that NONE of the services are checked.
Check them all.
Close.
Everything SHOULD suddently spring into action, it certainly did for me.
It appears that some PC config's (all our work ones) need to be configured this way were as otheres set themselves up fine.
Let me know if this works.
Cheers.
Robin
the wierest thing just happened.
i wanted to try your solution, i opened the network connections folder, connected my kjam, and for my surprise it just connected without me doing anything, and i had it sycronised over the USB.
BUT, the wierd thing, is even though i have the connection, and it is syncronizing with my laptop, i don't have the connection icon on my kjam, instead i had this message (attached).
what does this mean?
Don't know, I have never seen this!!!!
Robin
the strange things keeps coming...
when i wanted to sync my device again this evening, my whole laptop freezes without any responce.
can someone here tell me what's the problem i'm having here? & how to solve it?
i don't wonna format my PC over this.
thanks all in advance.
I have noticed that the synchronisation only happens properly if I connect to the SAME usb port. If I connect to another port, the laptop picks up the connection but won't synchronise.
Connect to the same USB port and voila!!
Hope that helps.
See my reply earlier.
Each different USB port you connect too AS creates a NEW network with a different number on the end of it.
You have to open the network properties for all the networks (with numbers) you intend suing and make sure all the properties are checked.
I use 3 different USB ports on my laptop depending on wether it is docked at home the office or undocked.
I have had to do this procedure for each port but now they ALL work smoothly every time.
Regards.
Robin
i did connect it to the same USB port, but no luck there, the same problem. i uninstalled the AS twice and re-installed it but it's the same.
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
mzk78 said:
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
Click to expand...
Click to collapse
Strange.
I know a number of people this worked for.
You could/should also try disabling your firewall and giving it another go.
Robin

ActiveSync cannot be completed successfully...

Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
try to install everything again and don't plug it on the usb hub...coz power is not sufficient on a usb hub .. just try.
I'm getting the same error exactly on my Cingular 8125. plugged into pc directly via USB, tried reinstalling AS several times to no avail. Please help. I don't want to have to hard reset. :? Thanks
As I mentioned in my OP, there is no USB hub involved in my setup. This is a direct USB connection from my PC to the MDA.
ooppppssss
hehehe.. Are you syncing via the cradle or a hotsync cable ?. Sometimes if the cable is also charging, the connection is not sucessfull until it's fully charge and the top light is green.
I've had this problem myself before now.
Rockshow...are you also running SPB Weather?
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Firewall
Hi,
Do you use a firewall (Windows XP or other one)
If so, check this out.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
It worked for me!
grtz,
Pfeffa-rah
I'm also facing the same problem with my tmobile-mda(us). I had spbplus but after this problem, uninstalled it. but the problem still exists.. any help ?
i noticed 2 things with my sync problems which are now resolved. one problem was with softick card export, it was causing some errors which were gone when i uninstalleed it. but then had another problem, it would disconnect while syncing randomly. i found out that my cable was damaged(some dirt was in the connector which thankfully ruined the cable and not the phone part) also when u first connect ur device it shows that network connection in the taskbar with the bouncing yellow ball. if u right click it and click on repair that helps some time.
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
RoCkShOw said:
No, i'm using spb pocket plus 3.1 though, but its the first thing I installed and i'm just now having problems after 3 weeks without any problems
Click to expand...
Click to collapse
What's the significance of PSB Weather? I've had sync problems, some days it works some days it doesn't. I can cope with that, but sometimes SPB weather doesn't update it self for days, which is a bit of a pain!
Incidentally I recently hard-reset my device, reinstalled SPB Weather and can nolonger select the option of syncing from weather.com, which limits my choic of available cities. Any ideas?
Try killing and restarting activesync on the phone. I've only had that problem once and that sorted it.
I had the same problem.
Found out it was my virus protection (TrendMicro PC-Cillin) When I disable my virus protection it syncs, otherwise it only connects and then gives the error you described.
I had the exact same problem untill a few minutes ago when I did a hard reset. I back up my all my data using Sprite but when I restored it gave me the same error message. I gave up and did another hard resetjavascript:emoticon(':x')
Mad. Right now I'm reinstalling all my programs. I would love to know how to fix this without a hard reset just in case it happens again....javascript:emoticon('')
Crying or Very sad
Hi:
Having here the same problem. Still looking for a solution... ANYBODY??
fadewiles said:
Sorry in advance for another AS issue. However, search as I may, I couldn't loacte anything like this...
Anyhow, my T-mobile MDA (US) has about driven me nuts with this issue. I was able to sync successfully a few times. However, now when I plug in the MDA via USB (direct, not through any hub), it will connect but when the device starts to sync, I get the following error from ActiveSync:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync troubleshooter in Microsoft ActiveSync help on your desktop computer".
I've uninstalled activesync, deleted all registry entries, reinstalled, ensured proper firewall configuration, changed com ports, disabled my internal WLAN card and BT card...and nothing. Short of a hard-reset, I am at a total loss.
Has anyone else experienced this issue? Any work-arounds?
Click to expand...
Click to collapse
I had the same error today. But luckely i was only using ActiveSync 4.0, so i just updated to version 4.2 (I had to because of the new rom upgrade). I haven't had the problem since. But i have only tried it once... so i donno.
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
same problems with my Neo today.
Funny thing is that I could sync for 3 days then it suddenly stops. USB is recognized but then the "connecting" sign is just on and on and on.
I've tried all the methods from Microsoft web and from you guys in this forum but hopeless. (except for Re-install XP sp2)
Still searching the solution
Cheers
Yeah,
I seem to be having the same problem. It connects, then just hangs at "Looking for Changes." It doesn't even load up the list of things that it normally used to showing what it's comparing to sycn up. It was working FINE until just now....I've resetted the PDA, and my comp a few times already, and I even allowed all those ports access in both directions, both TCP and UDP through Norton Firewall...I'm completely at a loss....Any ideas?
--Q

Cannot connect via USB

Hi Friends and Gurus,
I'm stumped . I cannot get any connection to my PC via USB. I don't get the "du-duh" connect sound. The connection is not present in my network connections.
Here are the steps to reproduce:
Unlocked Cingular 8525, WM5 official update
ActiveSync 4.5 uninstalled and reinstalled on PC
Attach phone to computer via USB cable (in any of 3 USB PC ports)
Phone gets power via USB cable (light on Hermes turns amber), but..
Problem:
No connection sound (du-duh)
No connection visible in network connections
A bit more info:
In messing around, I could have set something incorrectly on the phone. But I'm afraid (and embarassed to admit) I don't know where to start.
I've searched this site and have not found the magic cure.
If you have any tips, suggestions, settings to try, etc., i'd really appreciate it.
Thanks,
Chris
as silly as this sounds... mine wont connect to activesync or mymobiler if I have WiFi enabled on the 8525.
Just pointing that out in case you hadnt tried it
Thanks densmore,
Mine used to work even with WiFi on (so for a while I was in better shape than you ) , but now, it doesn't matter either way (so now I'm much worse off than you ).
I'll keep hoping for other suggestions here, but appreciate your tip.
Chris
try this...
go to device manager and uninstall usb hub and then search for new devices and it will reinstall itself. reboot and try again.
I suppose you have 'enable advanced network functionality' unticked?
If not:
start/settings/connections/usb to pc/ untick
If you have, try ticking it, soft reset, try to connect again.
I suppose you have rebooted your pc/laptop?
deleted the partnership and reformed it?
tried another usb port?
also, this is a useful source of info:
http://www.pocketpcfaq.com/faqs/activesync/syncerrors.htm
If I think of more, I'll come back.
See http://forum.xda-developers.com/showthread.php?t=318425 for a complete review of MyMobiler
Just another thing to confirm. You have not used the likes of memmaid to remove notifications and accidentally removed repllog entries?
You can use the likes of sktools to confirm that the repllog entries to start Active Sync are present.
Mike

ActiveSync not working (all of a sudden)

Hi All
I searched the Forum but couldn't find a solution to this problem.
1. Came back form holiday yesterday - synced up my HD" with Outlook no problem
2. Tried to do it this morning. By the normal 'connect PC' option didn't come up and activsync icon didn'tr light up on PC
3. Rebooted HD2 and PC..no change
4. Tried to repair/reinstall activ sync, but towards the end of the repair it says 'there was a network error reading from file 'setup/msi'. Guessing that the file may be corrupt, I downloaded it again..same problem..so I can't repair or reinstall
5. There is definitely a connection of some sort as the HD2 begins to charge when connected
Bottom line is that the HD2 is not syncing - and I can't figure out why not.
Any advice appreciated...
Thanks
Do you have a Norton (Symantec) firewall installed? I’ve found that the Norton product can interfere with ActiveSync.
Active Sync not working
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
ActiveSync is just a bit crap. It'll do this occassionaly, so if you use it a lot then get used to it.
A restart of the phone, whilst the USB cable is not plugged in, usually does the trick. Only plug it in again when it's fully started.
Also, try setting the AS connection to not allow USB connections, unplugging and plugging back in, and then setting it to once again allow USB connections.
Just messing with it like that usually works for me. Like I said, it's just a bit crap.
Activ Sync
Yeah, I seem to recall I had this problem a while back - I'll faff around with the settings and see if it makes a difference
Steve
stevep said:
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
Click to expand...
Click to collapse
Well if johncmolyneux's suggestions don't work then try disconnecting your phone from the PC, restarting both, disconnecting the PC from the network, disabling the firewall element of AVG (if it has one) and then connecting the phone to the PC again.
If that doesn't work I can only suggest removing ActiveSync, totally shutting down your PC, starting up, then re-installing ActiveSync.
I had a similar problem but I was able to narrow it down to Norton in the end but it's a real pain when you don't know why it won't work.
Good luck with this.
I also occasionally was not able to connect with Active Sync, but rebooting the HD2 always fixes that issue. You said that this did not helped you, so try messing with the settings on Active Sync, like johncmolyneux said, also try when plug the usb cable into the device by default it asks you what kind of connection you're establishing (Active sync, data transfer and internet sharing) - try using data transfer, if it connects, unplug and connect it again, this time use active sync.
Reinstall activsync and Try to disable faster data Synchonization on HD2
Active Sync not working (solved)
That'll teach me to not check the obvious! - It turned out that the cable had developed a fault. I changed the cable and it's now OK.
Case closed.
Steve

HTC touch HD Sync problems

Hello,
When I connect my HTC Touch HD to my pc via USB it DOES Charge, but it ISN'T recognized by my pc and it DOESN'T sync via ActiveSync.
Have tried multiple Pc's and even a Mac. Also I've tried multiple USB-Cables and I've also re-installed active sync.
When going into USB-to-PC settings al options have been tested and even a hard-reset didn't do the job.
When trying to flash my rom using my memory card it just keeps saying "loading" when in bootloader mode..
As you can see I'm desperate.
Does anyone have any sugestions? Or is it my phone simply broken?
when you plug in your phone thru usb to your comp, did anything come out from your HD, prompting to sync with activesync, file transfer.. or nothing at all?
pvz said:
Hello,
When I connect my HTC Touch HD to my pc via USB it DOES Charge, but it ISN'T recognized by my pc and it DOESN'T sync via ActiveSync.
Have tried multiple Pc's and even a Mac. Also I've tried multiple USB-Cables and I've also re-installed active sync.
When going into USB-to-PC settings al options have been tested and even a hard-reset didn't do the job.
When trying to flash my rom using my memory card it just keeps saying "loading" when in bootloader mode..
As you can see I'm desperate.
Does anyone have any sugestions? Or is it my phone simply broken?
Click to expand...
Click to collapse
Did you ensure that the "Allow USB connections" in the Connections Settings of ActiveSync was ticked?
I have found this to be a problem when flashing in the past.
Same issue here
I have the same problem... tired multiple cables, OS, systems, Hard Resetting but nothing. Only 1 time after one of the Hard Reset but then gone next time. Even in the boot loader it doesn't come up...
USB Hardware screwed?
Thanks for the replies!
when you plug in your phone thru usb to your comp, did anything come out from your HD, prompting to sync with activesync, file transfer.. or nothing at all?
Click to expand...
Click to collapse
Nothing at all... Just that it is now charging..
Did you ensure that the "Allow USB connections" in the Connections Settings of ActiveSync was ticked?
I have found this to be a problem when flashing in the past.
Click to expand...
Click to collapse
Yes I made sure it was ticked... Even ran the connect button in the rop right a couple of times. Not sure that would ever help though.
So maybe it is screwed up usb hardware as saliss sugested...?
pvz said:
Thanks for the replies!
Nothing at all... Just that it is now charging..
Yes I made sure it was ticked... Even ran the connect button in the rop right a couple of times. Not sure that would ever help though.
So maybe it is screwed up usb hardware as saliss sugested...?
Click to expand...
Click to collapse
okay. If so we better go into details. Please let us know which ROM you are using. And maybe some other useful information, such as what software you installed etc.
Sorry for the late reply.
The rom I'm using is:
1.14.172.1 (24011) NLD
I hard resetted the phone multiple times, so there isn't any software on it other than the normal stuff.
Any sugestions?
Which OS you have in your PC? XP, vista or 7?
Have you checked in your phone under, settings, connections, USB, which one is selected?
Which OS you have in your PC? XP, vista or 7?
Have you checked in your phone under, settings, connections, USB, which one is selected?
Click to expand...
Click to collapse
System: Win XP
USB to PC settings is set on syc with active sync and all other options are turned off (unchecked)
did you figure this out?
I have same issue, am thinking its USB hardware as I can charge but not connect to any PC yet I can with another device using same cable.. anyone know any reputable repairers in the UK?
Hmmm, I kinda remember that HTC released new USB drivers last year...
Not sure thou, but you might take a look at their site...
MOD EDIT - Moved to General discussion
sync from Outlook
I have a slightly different problem. I have managed to sync my emails and my contacts but not my outlook diary! I have tried everything, although I suspect it has something to do with the way my Outlook is set up so I am not worrying yet!

Categories

Resources