Hello All,
I don't know what is the problem. It seems ok for the first time after i installed the version 4.0 that comes with the CD. It works fine. But for the second time, it just 'connecting'. Have gone thru' the troubleshooting processes but without success. Also tried to install the new version 4.1 but won't work.
Pls can someone help me on this.
rgds.
zainal.
does it sync over BT?
i had the same problem before & i still do, but soem other guy here in the forum said it worked for him when he uninstalled AS then reinstalled it again.
try it, it might work with you.
until now i'm still stuck with BT syncing, i cannot sync over USB.
i still get "connecting" message all the time with no progress.
Hi Guys
I had EXACTLY the same problem, alhough I could not get BT to work but could get IRDA to work.
Here is what I THINK the problem is, by the way i-mate were useless it was a colleague at work that had finally found this problem on his device.
WM5 devices when connecting via USB create a NETWORK. Strange but true.
SO, open Control panels, open Network Connections.
Attach your K-JAM (or other WM5 device) you SHOULD see a new network get created with a random number at the end of it (the number changes depending on the USB port you use so you MAY need to do this procedure again if you connect via a different USB port).
Get the properties of this new network when it opens you should see that NONE of the services are checked.
Check them all.
Close.
Everything SHOULD suddently spring into action, it certainly did for me.
It appears that some PC config's (all our work ones) need to be configured this way were as otheres set themselves up fine.
Let me know if this works.
Cheers.
Robin
the wierest thing just happened.
i wanted to try your solution, i opened the network connections folder, connected my kjam, and for my surprise it just connected without me doing anything, and i had it sycronised over the USB.
BUT, the wierd thing, is even though i have the connection, and it is syncronizing with my laptop, i don't have the connection icon on my kjam, instead i had this message (attached).
what does this mean?
Don't know, I have never seen this!!!!
Robin
the strange things keeps coming...
when i wanted to sync my device again this evening, my whole laptop freezes without any responce.
can someone here tell me what's the problem i'm having here? & how to solve it?
i don't wonna format my PC over this.
thanks all in advance.
I have noticed that the synchronisation only happens properly if I connect to the SAME usb port. If I connect to another port, the laptop picks up the connection but won't synchronise.
Connect to the same USB port and voila!!
Hope that helps.
See my reply earlier.
Each different USB port you connect too AS creates a NEW network with a different number on the end of it.
You have to open the network properties for all the networks (with numbers) you intend suing and make sure all the properties are checked.
I use 3 different USB ports on my laptop depending on wether it is docked at home the office or undocked.
I have had to do this procedure for each port but now they ALL work smoothly every time.
Regards.
Robin
i did connect it to the same USB port, but no luck there, the same problem. i uninstalled the AS twice and re-installed it but it's the same.
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
mzk78 said:
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
Click to expand...
Click to collapse
Strange.
I know a number of people this worked for.
You could/should also try disabling your firewall and giving it another go.
Robin
Related
This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
Now I have the MDA and have installed Active Sync 4.1 (even tried 4.2). When I plug in the MDA, Windows makes the 'donk' sound to advise something's been connected but it just shows a 'Generic RNDIS' device connected and the add hardware wizard says the device cannot start (yes it's turned on).
I don't see any drivers on the T-Mobile CD that came with the product....is there something else I have to do to install this thing so Active Sync recognizes it?
<edit> I've attached a picture of the hardware manager...
When I uninstall the driver and re-plug in the device, it's immediately recognized as a Windows Mobile-based device but then I get the error: "A problem occured during hardware installation. Your device may not work properly." This happens each time I try it, even after a restart.
thanks,
Tim
hi buddy
i've had that XPerience when i've connected my brand new prophet (o2 xda neo) to my pc via usb 2.0 hub. i was going nuts, because all older partnerships to devices i've established before i've bought the hub did work... if you do the same - change it! at least one time you should connect the ppc directly to an available usb connector on your pc until you have established a partnership. also i would recommend to install active sync 4.2 beta (use the search here to find the link), it fixes some connecting trouble... let us know if any of these tips helped at all or if you found your own solution...
cheers, lutz
Try disabling your firewalls these are the usual culprits to stop syncing. You can add activesync to the list of acceptable programs if you use something like zone alarm firewall etc.. I have the windows firewall disabled.
Thanks for the suggestions. I've tried connecting directly to the USB port -- no dice. I only have the Windows Firewall which was already showing ActiveSync as an allowed application but I turned it off and still nothing changes.
The device manager reports:
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
The troubleshooter basically instructs me to delete the device and try again, which I've done a dozen times, restarted both phone & computer. Still nothing.
Another trick that worked for me, if you have a network socket even if you dont have a network cable attached, enable network connections on your computer and try again. Whenever you change settings on your computer uninstall activesync and reinstall it. Hope that helps.
AS not connecting
For some reason, I had to repair/re-install AS. After re-booting, XP Pro/AS 4.2Beta recognized the Wizard again (Cing 8125) as all was well.
It's been stable the past few days, I think because I'm not trying to sync at work (I just cancel and use Guest).
Not a great answer, but good luck...
paul
Thanks, still no go. I do have an active Internet connection. I'm not so sure this has anything to do with ActiveSync as the computer doesn't even get to a successful install of the hardware....it always says a problem occured and the hardware may not work properly.
Succes...almost. I left the phone plugged in and restarted (after deleting the hardware profile) and when the PC rebooted it made that oh-so-sweet ActiveSync connected sound. Then AS quit and I was back to where I started in the post before....doh!
Just for kicks I plugged in my old Jam and it worked just fine, the hardward was recognized right away.
This leads me to believe something may be hosed on my MDA? Weird because it charges fine and everything else is great...it was a brand new unopened box from the local T-Mo retailer.
Hmmm...
BNDIS Connector
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -
Re: BNDIS Connector
jkossowsky said:
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -
Click to expand...
Click to collapse
This happened to me too. ActiveSync 4.1 worked perfectly until my WinXP Machine crashed and I had to reload.
When I reloaded, ActiveSync acting in the same manner.
I'll try this tonight and see if works for me. Hope so.
timskrastins said:
This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
thanks,
Tim
Click to expand...
Click to collapse
You can still use your mac & missing sync 2.5 alpha & for most things it will work fine, but functionality is limited & sync only via BT. - it does ical, Address Book & tasks & time sync. & you can also install programs & documents as well. for media I just copy the songs straight to my mini sd card via a card reader.
Some programs will only install via windows, but as I have an intel iMac I run windows as well & activesync so far works well for me, but I have to disable the contacts/tasks/calendar or I end up with dupicate entries etc.
jkossowsky - awesome info. The problem I'm having is that the device does not show up in the network adapters. When I plug it in, it tells me there was a problem with the device and it could not be started.
Device Recognized
You need to install Active Sync 4.x before plugging in your device.
So, to be really really safe, go to Device Manager, look at the Unrecognized Devices section, find your unrecognized device and right click on it and remove it.
Install Active Sync 4.x
(if you already installed it, uninstall it, reboot and reinstall it again)
Once it is installed, plug in your device and it should be recognized as a Network Adapter.
If Active Sync does not automatically find the device, follow the instructions from my post above.
Uninstall Activesync, reboot, Reinstall Activesync, Reboot, plug in device.
pray
if that fails, attached are the proper INF files, manually update them to this, and see if that helps.
Thanks for the info, I'll give this a try. The thing that really killed me is that my old iMate Jam connected fine during this whole ordeal.
I exchanged the Wizard for a new one and still had the same issue. I finally tried syncing it on a new laptop running Win XP Pro and was able to get it to connect.
I'll try the suggestions above on the previous machine to see if I can get it to recognize the phone. Atleast I know the phone is not defective now.
Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'
timskrastins said:
Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'
Click to expand...
Click to collapse
try this;
http://forum.xda-developers.com/viewtopic.php?t=51649&highlight=
Hmmmm....
You may want to have a look @ support.microsoft.com
There's an issue with 4.x ActiveSync [AS] and Windows Firewall. Even though AS is listed in the exceptions, it doesn't work properly......
See here.......... http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
I had this also - bugged me for weeks.
I found that the AS suite I downloaded from the MS site - regardless of version - would never find the Wizard. Only when I installed the version on the CD that came with the dvice would it connect - even though I think it was only AS 4.0.
Although I imagine you've aalready tried the CD version if you have one...
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
Hi Friends and Gurus,
I'm stumped . I cannot get any connection to my PC via USB. I don't get the "du-duh" connect sound. The connection is not present in my network connections.
Here are the steps to reproduce:
Unlocked Cingular 8525, WM5 official update
ActiveSync 4.5 uninstalled and reinstalled on PC
Attach phone to computer via USB cable (in any of 3 USB PC ports)
Phone gets power via USB cable (light on Hermes turns amber), but..
Problem:
No connection sound (du-duh)
No connection visible in network connections
A bit more info:
In messing around, I could have set something incorrectly on the phone. But I'm afraid (and embarassed to admit) I don't know where to start.
I've searched this site and have not found the magic cure.
If you have any tips, suggestions, settings to try, etc., i'd really appreciate it.
Thanks,
Chris
as silly as this sounds... mine wont connect to activesync or mymobiler if I have WiFi enabled on the 8525.
Just pointing that out in case you hadnt tried it
Thanks densmore,
Mine used to work even with WiFi on (so for a while I was in better shape than you ) , but now, it doesn't matter either way (so now I'm much worse off than you ).
I'll keep hoping for other suggestions here, but appreciate your tip.
Chris
try this...
go to device manager and uninstall usb hub and then search for new devices and it will reinstall itself. reboot and try again.
I suppose you have 'enable advanced network functionality' unticked?
If not:
start/settings/connections/usb to pc/ untick
If you have, try ticking it, soft reset, try to connect again.
I suppose you have rebooted your pc/laptop?
deleted the partnership and reformed it?
tried another usb port?
also, this is a useful source of info:
http://www.pocketpcfaq.com/faqs/activesync/syncerrors.htm
If I think of more, I'll come back.
See http://forum.xda-developers.com/showthread.php?t=318425 for a complete review of MyMobiler
Just another thing to confirm. You have not used the likes of memmaid to remove notifications and accidentally removed repllog entries?
You can use the likes of sktools to confirm that the repllog entries to start Active Sync are present.
Mike
Hi All
I searched the Forum but couldn't find a solution to this problem.
1. Came back form holiday yesterday - synced up my HD" with Outlook no problem
2. Tried to do it this morning. By the normal 'connect PC' option didn't come up and activsync icon didn'tr light up on PC
3. Rebooted HD2 and PC..no change
4. Tried to repair/reinstall activ sync, but towards the end of the repair it says 'there was a network error reading from file 'setup/msi'. Guessing that the file may be corrupt, I downloaded it again..same problem..so I can't repair or reinstall
5. There is definitely a connection of some sort as the HD2 begins to charge when connected
Bottom line is that the HD2 is not syncing - and I can't figure out why not.
Any advice appreciated...
Thanks
Do you have a Norton (Symantec) firewall installed? I’ve found that the Norton product can interfere with ActiveSync.
Active Sync not working
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
ActiveSync is just a bit crap. It'll do this occassionaly, so if you use it a lot then get used to it.
A restart of the phone, whilst the USB cable is not plugged in, usually does the trick. Only plug it in again when it's fully started.
Also, try setting the AS connection to not allow USB connections, unplugging and plugging back in, and then setting it to once again allow USB connections.
Just messing with it like that usually works for me. Like I said, it's just a bit crap.
Activ Sync
Yeah, I seem to recall I had this problem a while back - I'll faff around with the settings and see if it makes a difference
Steve
stevep said:
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
Click to expand...
Click to collapse
Well if johncmolyneux's suggestions don't work then try disconnecting your phone from the PC, restarting both, disconnecting the PC from the network, disabling the firewall element of AVG (if it has one) and then connecting the phone to the PC again.
If that doesn't work I can only suggest removing ActiveSync, totally shutting down your PC, starting up, then re-installing ActiveSync.
I had a similar problem but I was able to narrow it down to Norton in the end but it's a real pain when you don't know why it won't work.
Good luck with this.
I also occasionally was not able to connect with Active Sync, but rebooting the HD2 always fixes that issue. You said that this did not helped you, so try messing with the settings on Active Sync, like johncmolyneux said, also try when plug the usb cable into the device by default it asks you what kind of connection you're establishing (Active sync, data transfer and internet sharing) - try using data transfer, if it connects, unplug and connect it again, this time use active sync.
Reinstall activsync and Try to disable faster data Synchonization on HD2
Active Sync not working (solved)
That'll teach me to not check the obvious! - It turned out that the cable had developed a fault. I changed the cable and it's now OK.
Case closed.
Steve