Hi to all
In rom update process (around 23%) my p3300 turn off with an error about FLASH and after it I can't turn on it and also I can't enter to boot loader.
Any idea?
Thanks a lot.
Did you run USPL before you flash?
Did you tried enter bootloader with Power+Voice speed dial buttons pressed together?
If you have the shipped ROM try to flash it.
Did you run USPL before you flash?
Click to expand...
Click to collapse
yes i run USPL before flash.
my ppc was cid unlock.
Did you tried enter bootloader with Power+Voice speed dial buttons pressed together?
Click to expand...
Click to collapse
yes, but no answer from my ppc !!!!!!!!!!!!!
If you have the shipped ROM try to flash it.
Click to expand...
Click to collapse
i have it. but i can't enter bootloader to flash my ppc!
any idea ?
any help !!??!!
hey is there any body ?
mehdirm666 said:
hey is there any body ?
Click to expand...
Click to collapse
Maybe you can use SD-card flashing? You could use that to flash a very small rom like YuE extra clean
Can you enter the bootloader via this method?
If not do you get an error msg?
Maybe you can use SD-card flashing? You could use that to flash a very small rom like YuE extra clean
Can you enter the bootloader via this method?
If not do you get an error msg?
Click to expand...
Click to collapse
hi
i can't turn on my ppc !!!
i can't enter bootloader !!! camera and power button not work !
even my ppc's battery not charge !
i guess my ppc's bootloader damaged!
any idea ?
this is not SPAM ! ()
Related
i used this flash
damn i killed my phone i tryed this flash
T-Mobile SDA Users: http://www.smartmobil.no/index.php?...eq=getit&lid=84 (Qtek 8300 ROM)
and now the phone wont boot any help now please please ????
You can try to reninstall your frimware. IF you follow the instructions in the upgrade thread it should be like upgrading your phone from nothing. Which is quite the upgrade
Moblin88 said:
You can try to reninstall your frimware. IF you follow the instructions in the upgrade thread it should be like upgrading your phone from nothing. Which is quite the upgrade
Click to expand...
Click to collapse
yes but i can't get in boot mode i mean phone is total put no power strange??
Hello,
See if you could get into Boot-loader mode. Then just Flash with a good suited ROM from ftp.
Carty said:
Hello,
See if you could get into Boot-loader mode. Then just Flash with a good suited ROM from ftp.
Click to expand...
Click to collapse
the ftp is not ok so how to flash without a boot mode i mean i need to click camera and power buton same time and to reset but after a bad flasg my phone is not powering on how to get into the boot mode thx
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
I am sorry to hear that, did you buy it in Taiwan, do you think they will give you a replacement? hope so.....good luck
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
Have you tried to hardreset?
c0rnholio said:
Have you tried to hardreset?
Click to expand...
Click to collapse
yes after hard reset satck in splash and no more,,,
i hope dopod replace it but,,,,
How about reflash from boot loader? Hav you treid it?
cornelius said:
How about reflash from boot loader? Hav you treid it?
Click to expand...
Click to collapse
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
But treid to flash Hermes Bootloader, on PDA / PC showed me seems succsessufuly, but aftter re-enter bootloader, nothing had changed.
sad to hear that... bricked first day
Have you tried to reformat storage from bootloader, or to flash a rom again?
Asukal said:
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
Click to expand...
Click to collapse
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
pof said:
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
Click to expand...
Click to collapse
thanks, tested and still can not boot.
i wonder why only registry canged by CAB can not boot any more ??
it should not damage to device!
(But i have expienrece Himalaya Extrom Unlocker make another device OS read only before)
Any way, tried ways i could think all! and keep on trying other ways.
booteddddddddddddddddddd!
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Asukal said:
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Click to expand...
Click to collapse
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
fallenczar said:
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
Click to expand...
Click to collapse
yes,, you guys save my life!
and thanks for your watching me this stupid one.
T mobile UK Ameo
Hi I did tried to unlock and now I get only a black screen and I can't boot again. I have the old flash image , but I can not connect with active sync my ameo. How can I pump the old flash image into my ameo ?!
Thank you in advance!!!
Hi
I recive SPV C500 when i power phone in display i have only Orange logo and Phone power off
I make updrate to MW6 phone alive but now i have Network problem
Please how to solve this problem if is it software problem
thanks
f6_gsm said:
Hi
I recive SPV C500 when i power phone in display i have only Orange logo and Phone power off
I make updrate to MW6 phone alive but now i have Network problem
Please how to solve this problem if is it software problem
thanks
Click to expand...
Click to collapse
can you get into bootloader?
hi
Yes i can put phone in boot mode
what can i do
thanks
f6_gsm said:
hi
Yes i can put phone in boot mode
what can i do
thanks
Click to expand...
Click to collapse
what dose it say on the screen when you go into thr bootloader
rickwyatt said:
what dose it say on the screen when you go into thr bootloader
Click to expand...
Click to collapse
IPL 1.00
SLP 1.01.0109
UI
f6_gsm said:
IPL 1.00
SLP 1.01.0109
UI
Click to expand...
Click to collapse
you need mtty.exe to flash yo ur phone you can use wm5 or wm6 go here
http://www.geocities.com/gggbitonti/typhoon.htm
Hi
I use Mtty1.42 and flash my phone with WM6 my phone power on now but don't have Network
rickwyatt said:
you need mtty.exe to flash yo ur phone you can use wm5 or wm6 go here
http://www.geocities.com/gggbitonti/typhoon.htm
Click to expand...
Click to collapse
I make all operation for http://www.geocities.com/gggbitonti/typhoon.htm
phone alive but now it have Network problem
f6_gsm said:
I make all operation for http://www.geocities.com/gggbitonti/typhoon.htm
phone alive but now it have Network problem
Click to expand...
Click to collapse
did you ever upgrade your c500 with the orange update? frist go to settings on your phone then go to about what is your radio version mine is 1337.0.42_0.03.28
rickwyatt said:
did you ever upgrade your c500 with the orange update? frist go to settings on your phone then go to about what is your radio version mine is 1337.0.42_0.03.28
Click to expand...
Click to collapse
No i no updrate phone with orange update
Windowns Mobile r 6
OS 5.2.318 (Build 15341.0.0.0)
Radio Version 1337.0.32_0.03.18
please need u contact
thanks
f6_gsm said:
No i no updrate phone with orange update
Windowns Mobile r 6
OS 5.2.318 (Build 15341.0.0.0)
Radio Version 1337.0.32_0.03.18
please need u contact
thanks
Click to expand...
Click to collapse
your going to have to go back to wm3 to get your radio upgraded
go here follow
http://www.user.cityline.ru/~ronswens/tutwm2003.html
to the letter, until you get to the part where you have to type in
format BINFS
if you get "Not allow operation" after typing
>format BINFS
then try this
>info 2 <--------- note the space between info and 2
then type in
>format BINFS
then restore this http://www1.orange.co.uk/c500patch/
this will upgrade your radio to the one i use then go here http://www.geocities.com/gggbitonti to go back to wm6
Now my phone don't connect with activesyn 4.1 when i try to install activesyn 4.50 i have error :
Error. There is problem with Windows Installer package; A DLL requiered for this install to complete could not be run. Contact your support personel or package vendor.
i have windows service pack1
f6_gsm said:
Now my phone don't connect with activesyn 4.1 when i try to install activesyn 4.50 i have error :
Error. There is problem with Windows Installer package; A DLL requiered for this install to complete could not be run. Contact your support personel or package vendor.
i have windows service pack1
Click to expand...
Click to collapse
try download activesync 4.5 again if that dont work
try uninstalling 4.1 frist reset computer then try active
sync 4.5 again did got wm3?
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
While in bootloader mode, connect via USB and try to flash down to wm5. It worked with nanoscopic step1 for me. Then i was able to reflash any wm6 again.
What version of ROM you're using??
hugot said:
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
Click to expand...
Click to collapse
No matter what you have, reinstall PDAVietTemp to recover
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
hugot said:
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
Click to expand...
Click to collapse
If you are upgrading to WM6, you need to HardSPL your prophet.
See this post http://forum.xda-developers.com/showpost.php?p=1718372&postcount=6
Before you do the HardSPL check if you have a G3 or a G4!
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?
kwbr said:
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?
Click to expand...
Click to collapse
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off
mehulkarate said:
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off
Click to expand...
Click to collapse
Have you tried flashing a stock rom?
kwbr said:
Have you tried flashing a stock rom?
Click to expand...
Click to collapse
i was find my device id -ELF010050, CID -DOPOD0100 and i flashed my phone with those roms like
1)RUU_Elfin_DOPODASIA_WWE_2.20.707.1G_4.1.13.51_03.07.90_GREEN_Ship_Reduced
2)RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship
3)RUU_Elfin_hTC_Asia_WWE_3.07.707.02_4.1.13.71_03.34.90_BLUE_Ship(frome official web site htc/asia.com)
flashing was complete 100% but my phone don't start from smart mobility.
mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!
takatori said:
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!
Click to expand...
Click to collapse
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.
mehulkarate said:
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.
Click to expand...
Click to collapse
Use a goldcard
recover my elfin
kwbr said:
Use a goldcard
Click to expand...
Click to collapse
hello all
i have recover my elfin and i installed uspl and then update my spl,ipl then flashed by onyx_6_release14 rom so rom run superb.
thanks all