Database Users

Req: English ROM needed

Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all

http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:

Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort

tmobile's uk site would prob be a good place to start looking

2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...

Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?

Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?

I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks

i forgot to ask you what is soft reset and hard reset ?

sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan

You guys are wonderfull :lol: i got my XDA back by bootloader method .....

My JASJAR no Imei .Check how my device info shows.

My JASJAR Have Imei problem.I cant read it if i Press *#06# IT SAYS please wait....and nothing appear.
When switching , on shows NO GSM.When i insert a simcard, I cant get Network
When I go to device info, I get this:
ROM Version : 1.3.82 WWE
ROM Date : 02/22/06
Radio Version :
Protocol Version :
ExtROM :
The device can connect to Active sync, I did all Resets types.
When I try the Imei update from turkish guys, I get Error114,When I try to Upgrade the Device I get Connection problem.But I can explore the device using active sync.
Any idea???
Thanks

blaiseid said:
My JASJAR Have Imei problem.I cant read it if i Press *#06# IT SAYS please wait....and nothing appear.
When switching , on shows NO GSM.When i insert a simcard, I cant get Network
When I go to device info, I get this:
ROM Version : 1.3.82 WWE
ROM Date : 02/22/06
Radio Version :
Protocol Version :
ExtROM :
The device can connect to Active sync, I did all Resets types.
When I try the Imei update from turkish guys, I get Error114,When I try to Upgrade the Device I get Connection problem.But I can explore the device using active sync.
Any idea???
Thanks
Click to expand...
Click to collapse
Now I managed to upload ExtROM to the device but cant accept Radio Version, always error and not even 1% loaded.
When switching on, I can only see : NO GSM and 1.3.82 WWE in Red.
And once in boot mode, i can see 2.0.1 Down on the screen.
Any idea???

reflash your radio rom.
if it doesn't work, reset your diskchip back to default.

omega_ said:
reflash your radio rom.
if it doesn't work, reset your diskchip back to default.
Click to expand...
Click to collapse
I did all types of reset but still cant flash Radio, other files can be flashed but not radio.

blaiseid said:
I did all types of reset but still cant flash Radio, other files can be flashed but not radio.
Click to expand...
Click to collapse
did u tryed jaf htc flasher?
its have imei restore option and its good in HTC PHONES

stanner_austin said:
did u tryed jaf htc flasher?
its have imei restore option and its good in HTC PHONES
Click to expand...
Click to collapse
HELP I have the same problem....
Where can I find this jaf htc flasher?????

First off, what prompted this problem? Are you guys trying out the new Crossbow ROM and did something different?

stanner_austin said:
did u tryed jaf htc flasher?
its have imei restore option and its good in HTC PHONES
Click to expand...
Click to collapse
Eh!!! Stanner, you are here too.
Ok, dont have activation for htc-jaf,Will look for someone who have it.
Thanks.

Problem with qtek 9100 help me.................

I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me

blerim said:
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
Click to expand...
Click to collapse
Have you just flashed your device? It looks like it has gone wrong.
If yes Flash again to the original Rom or Wizard Love Rom.

that looks like a g3 ipl and a g4 spl. that's not normal...did you have a g4 device that you tried to flash with a g3 rom?

try this
Push the reset and them hold the camera
after the three colors com on
plug in usb
the usb light comes on you are alive
now if its a g4 then you habve to power out of it grab your manufacures 2,25 -2.xxx update and hit it make sure that your computer is not on hybernate and you screen saver is not on turn off the active sync usb conection.
if it recognizes the device it might take you 20 diferent tries but if it takes you will find your way out.
I bricked 2 from radio updates and the 2nd was a g4 i powered out with fariar 1.69. good luck now the fum begins.
If its a g3 well your in luck find the post data crash
ciao

thanks answer
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping

blerim said:
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
Click to expand...
Click to collapse
If you put an HTC Universal ROM in your HTC wizard, you are screwed..
What ROM did you try to flash exactly?

qtek 9100
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE

blerim said:
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
Click to expand...
Click to collapse
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?

thanks for questions
the-equinoxe said:
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
Click to expand...
Click to collapse
I did nothing and i dont now its a CID or IMEI unlocked
se the foto he not start in windows he block in dos

Error 260????

I've been trying to update my Wing from the T_Mobile stock wm6 ROM to a Cooked wm 6.1 rom since and i can't do the damn thing
Alright Everytime i try any ROM, Open Touch, Touch-IT, even the official HTC Rom i get the error 260, what do i do???????
Please help, your help is highly apreciated.
By the way my SPL is 4.10.000(default by T-Mobile)

is your phone HardSPL'd or are you using USPL?

fzzyrn said:
is your phone HardSPL'd or are you using USPL?
Click to expand...
Click to collapse
I have tried to do Hard-SPL before but that has the same problems. So this this i was using USPL.

I guess i'll just give up.
As the 77 people who saw this thread couldn't help me and my 5ooth attempt at ROM Flashing failed, i guess i'll just give up and stick with my T-Mobile ROM, .

try a different cable, make sure your phone is connected to activesync before you start

fzzyrn said:
try a different cable, make sure your phone is connected to activesync before you start
Click to expand...
Click to collapse
I tried all of that and it works smoothly until the white screee. But once i get the white screen on the phone and the Update Utility tries to connect to my phone, things mess up. The Utility says that it is facing error 260: Not connected.

[email protected] said:
I tried all of that and it works smoothly until the white screee. But once i get the white screen on the phone and the Update Utility tries to connect to my phone, things mess up. The Utility says that it is facing error 260: Not connected.
Click to expand...
Click to collapse
It's your computer, not your phone. Are you running Vista or XP? (Or ME/98)

ivanmmj said:
It's your computer, not your phone. Are you running Vista or XP? (Or ME/98)
Click to expand...
Click to collapse
I am using XP Home Service Pack 2. I am not the Administrater of the computer. .net 3.5 is installed if that matters.

Help plz for starting problem

Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.

mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?

kwbr said:
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?
Click to expand...
Click to collapse
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off

mehulkarate said:
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off
Click to expand...
Click to collapse
Have you tried flashing a stock rom?

kwbr said:
Have you tried flashing a stock rom?
Click to expand...
Click to collapse
i was find my device id -ELF010050, CID -DOPOD0100 and i flashed my phone with those roms like
1)RUU_Elfin_DOPODASIA_WWE_2.20.707.1G_4.1.13.51_03.07.90_GREEN_Ship_Reduced
2)RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship
3)RUU_Elfin_hTC_Asia_WWE_3.07.707.02_4.1.13.71_03.34.90_BLUE_Ship(frome official web site htc/asia.com)
flashing was complete 100% but my phone don't start from smart mobility.

mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!

takatori said:
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!
Click to expand...
Click to collapse
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.

mehulkarate said:
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.
Click to expand...
Click to collapse
Use a goldcard

recover my elfin
kwbr said:
Use a goldcard
Click to expand...
Click to collapse
hello all
i have recover my elfin and i installed uspl and then update my spl,ipl then flashed by onyx_6_release14 rom so rom run superb.
thanks all