Related
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
osama966 said:
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
Click to expand...
Click to collapse
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
I saw this yesterday, and I give it a try, the only issue I have is I have windows vista, so there is no active sync.
I tried to kill the process using ctrl Alt Del in order to see the USB port but I couldnt managed to do that.
Under windows Vista its called 'Windows Mobile Device Center' (wmdc.exe).
I tried everything
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
hamed_marie said:
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
Click to expand...
Click to collapse
i can see that hardspl is installed. did you tried flashing from sdcard?
i have had problems with stuck in bootloader (3 color) mode and also the prob with mtty in win vista...i try it on winxp and wow...it goes...
You use it to manage your business? Next time, dont mess with the ROM on your phone then
You seem to have SPL on the device. Try a different USB cable perhaps for connectivity.
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
nicandris said:
i can see that hardspl is installed. did you tried flashing from sdcard?
Click to expand...
Click to collapse
I tried flashing from SD card and I had only the tri color screen with the data mentioned before and nothing happens,I tried use MTTY and I could never have the USB port listed in the drop list.
Thanks for your concern and in advance
wesram said:
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
Click to expand...
Click to collapse
guys please helpppppp
up
hey ım usıng touch cruıse
pola100
spl 3.13.00
cpld-2
my cruıse not oen ower.always bootloader trı color .usb ok but ofıcıal rom ınstallıng problem yüzde1 later shuttıng.what must ı do?
Hi guys,
i'm pretty new to this so go easy on me have searched the forums for an answer to my quetion but couldn't find what i need.
I have put hard spl 1.66 onto my phone and am now trying to flash it have tried both the ROM and the radio but when trying to do it by active sync I get error [202] connection, then gives me a run down on what to check, I can access the phone through active sync etc and have followed the instructions in the noob guide but can't get past this point!
I have also tried flashing with the SD card but it does not boot up the .nbh file to carry on best I have been able to get is the factory reset option.
any help would be appreciated.
Thanks
Speersy.
i have tried to flash it off 3 different computers but get the same message each time, anyone fancy helping a noob? have followed the noob guide but must be going wrong somewhere
O.S Version 5.2.21864 (21864.5.0.81)
Manilla Version 2.5.19202525.0
ROM Version 1.43.110.2 (70315) WWE
ROM date 10/28/09
Radio Version 2.04.50.22_2
Protocol Version 15.26.50.07U
I have tried all different CustomRUU.exe to try and flash my phone with a new radio and ROM but each time it says to check the USB cable which I don't understand as I can install the hardSPL2 on to the phone via USB cable, somebody help please.
Thanks
Speersy
What model phone?
What does it say next to spl when you enter bootloader? (power off, hold vol down, tap power on, keep holding vol down till u get to three striped screen)
Are you using teh usb cable that came with it? are you using a usb hub? what operating system on the pc's?
hi thanks for the reply,
in the boot loader it says spl-2.08.HSPL 8g xe
yes i am using the cable that came in the box I have tried on a windows 7 machine and 2 xp machines both with latest updates
when you say model of phone I guess you mean htc hd2 on t-mobile uk
no i'M not using a usb hub cable goes straight into the pc
do you need any more info?
thanks
speersy
well that all sounds ok, can't see why it wouldn't work.
last possibility - when running the program, right click it and choose run as administrator.
oh and try all your usb ports.especially stay away from ports built into the case of the computer.try use one directly on themotherboard (one round the back)
Does the device connect to Activesync normally? What happens when you put the device into bootloader mode and then connect it to the pc via usb. Does "usb" appear at the bottom of the screen?
If so, try running the rom updater from the pc directly, ie not through Activesync
samsamuel said:
well that all sounds ok, can't see why it wouldn't work.
last possibility - when running the program, right click it and choose run as administrator.
oh and try all your usb ports.especially stay away from ports built into the case of the computer.try use one directly on themotherboard (one round the back)
Click to expand...
Click to collapse
no nor me wierd that i can flash the HSPL on but then customruu says to check the USB cable when it is connected and has just competed a sync.
have tried different USB ports but made no difference.
speersy said:
no nor me wierd that i can flash the HSPL on but then customruu says to check the USB cable when it is connected and has just competed a sync.
have tried different USB ports but made no difference.
Click to expand...
Click to collapse
have you tried running teh flash from bootloader? (phone doesnt need to be actually up and running, bootloader will do fine.)
boot to bootloader and then try usb ports till you get 'serial' to change to 'USB', then right click customruu.exe and run as administrator.
ClydeB1 said:
Does the device connect to Activesync normally? What happens when you put the device into bootloader mode and then connect it to the pc via usb. Does "usb" appear at the bottom of the screen?
If so, try running the rom updater from the pc directly, ie not through Activesync
Click to expand...
Click to collapse
Hi Clyde the device connects to active sync normally and completes it's synch with no errors,
Yes when i put it into the boot loader screen it comes up with USB at the bottom of the screen, have tried what you suggested but it still came up with the same error message,
tried again to do it from the SDcard when i enter the boot loader it brings up a loading screen then some numbers above that in red then goes back to the multi coloured screen and does nothing, you think that there is something wrong with the ROM??
is the noob guide which is stickied an accurate guide to use?
samsamuel said:
have you tried running teh flash from bootloader? (phone doesnt need to be actually up and running, bootloader will do fine.)
boot to bootloader and then try usb ports till you get 'serial' to change to 'USB', then right click customruu.exe and run as administrator.
Click to expand...
Click to collapse
hi, yeah have tried that got it to go to USB from serial, then ran the customruu as admin and got the same message about check the USB, does the 2 files have to be in a certain location or can be ran from anywhere?
speersy said:
hi, yeah have tried that got it to go to USB from serial, then ran the customruu as admin and got the same message about check the USB, does the 2 files have to be in a certain location or can be ran from anywhere?
Click to expand...
Click to collapse
They can be anywhere as long as they are the only 2 files in their own folder. Have you tried another usb cable?
ClydeB1 said:
They can be anywhere as long as they are the only 2 files in their own folder. Have you tried another usb cable?
Click to expand...
Click to collapse
ok well sounds like I have the files in the right place, haven't tried a different USB cable, will have to wait till Tuesday till I can get one from work, if we have a spare one somewhere.
have you tried a different rom? long shot but it could be a bad download.
samsamuel said:
have you tried a different rom? long shot but it could be a bad download.
Click to expand...
Click to collapse
have tried different versions of the energy ROM which didn't make any difference at all, have alos tried to flash the radio but got the same message again, have also tried different versions of HSPL2 with no joy,
I find it odd that i can't flash from the SD card either could there be something on the phone that is stopping it maybe something T-Mobile have put on as I have also done a hard reset to try and flash it aswel
also i have just read something about T29 do i need to run this before trying to move from the stock ROM?
no one else came across this problem before then?
speersy said:
also i have just read something about T29 do i need to run this before trying to move from the stock ROM?
Click to expand...
Click to collapse
It's not necessary and probably won't work for you as it is the same process as flashing.
ClydeB1 said:
It's not necessary and probably won't work for you as it is the same process as flashing.
Click to expand...
Click to collapse
ok thanks clyde, i guess i am all out of things to try to resolve this then?
speersy said:
ok thanks clyde, i guess i am all out of things to try to resolve this then?
Click to expand...
Click to collapse
Give it a go though, you've got nothing to lose.
hello am kinda new to all this, i'm trying to install HSPL 3 so i can flash my hd2 with a rom.
I have it Synced with My Computer. I have t-mobile usaHTC HD2. I open up HSPL3 thing. Press next. And its says its trying to connect via USB. stays stuck on that, then gives me an error message?
what am i doing wrong?
I HAVE 2.10.000 on my phone i just bought it. CAN I STILL flash my phone to get a custom rom????
anybody please, 2.10 i hear there is nothing out yet for 2.10 ?
for hspl... (yes it supports 2.10.0000, , dont forget that much of what you are reading was written before hspl3 was released)
1 - dont use a front mounted usb port, use one around back of the pc, directly connected to teh motherboard, not through a hub or case mounted ports.
2 - be sure and right click hspl.exe and choose 'run as administrator
3 - boot into bootloader yourself (start with phone off, press and hold and keep holding vol down, tap and release power, , when get to coloured screen, release vol down, , thats bootloader, ,) connect to usb, when the word 'serial' becomes 'usb' run hspl (as administrator)
keep trying usb ports.
if you are trying to use a virtual box, for example on a mac, , , dont.
oh, and be sure to extract hspl.exe, dont run it from within the .zip file.
thanks sam i got it, i love you.. now just gotta flash to get the rom
samsamuel said:
for hspl... (yes it supports 2.10.0000, , dont forget that much of what you are reading was written before hspl3 was released)
1 - dont use a front mounted usb port, use one around back of the pc, directly connected to teh motherboard, not through a hub or case mounted ports.
2 - be sure and right click hspl.exe and choose 'run as administrator
3 - boot into bootloader yourself (start with phone off, press and hold and keep holding vol down, tap and release power, , when get to coloured screen, release vol down, , thats bootloader, ,) connect to usb, when the word 'serial' becomes 'usb' run hspl (as administrator)
keep trying usb ports.
if you are trying to use a virtual box, for example on a mac, , , dont.
oh, and be sure to extract hspl.exe, dont run it from within the .zip file.
Click to expand...
Click to collapse
sam hows it going? how do i install cookie tab? you can't flash it?
Cookies tab is a cab file which can be found in my sticky. And directions on how to install the cab can also be found in my sticky.
Sent from my HTC Desire using XDA App
ddgarcia05 said:
Cookies tab is a cab file which can be found in my sticky. And directions on how to install the cab can also be found in my sticky.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
i still don't understand? help please
i dont know what to do with the cab? i'm so confused? mm? sam? anyone?
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
samsamuel said:
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
Click to expand...
Click to collapse
i added it but i cant seem to see it on file manager? mm is their a specific place?
samsamuel said:
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
Click to expand...
Click to collapse
got it thanks.
flashing HTC HD2 from TMOUS
Hey,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
Any help please...
sureshkgopalan said:
Hey,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
Any help please...
Click to expand...
Click to collapse
it may be connecting in disk mode.
settings menu all settings connection usb to pc.
make sure active sync is selected, and that faster data is NOT selected,.
I am having the same problem, i have tried the steps you gave but to no avail. i have tried every USB slot and tried a different cable. if i try and do it thru bootloader it does not change from serial to usb at all. any ideas? i have flashed roms before but lost my phone and my replacemnt is still running stock rom. ps i cannot even install the official HTC rom update to my phone. any help would be massivly aoppreciated as i am trying to get android on there for experimentation. Regards
thanks for the help!
Same problem..
leezx6r said:
I am having the same problem, i have tried the steps you gave but to no avail. i have tried every USB slot and tried a different cable. if i try and do it thru bootloader it does not change from serial to usb at all. any ideas? i have flashed roms before but lost my phone and my replacemnt is still running stock rom. ps i cannot even install the official HTC rom update to my phone. any help would be massivly aoppreciated as i am trying to get android on there for experimentation. Regards
Click to expand...
Click to collapse
Same here. I'm stuck i just want to update it to froyo 2.2. But i'm missin' this crucial step. Anyone fixed this issue yet?
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
GeneralWoo said:
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
Click to expand...
Click to collapse
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Simple,
Get to the tri color boot screen (vol down + power button)
Flash your win 6.5 ROM.
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Hewarmsjeans said:
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Click to expand...
Click to collapse
Just keep your phone unplugged and put it in bootloader mode. After a few seconds, the bottom part of the screen should say serial. Once it says that, plug it into your computer. Serial should change to USB in a second. If your computer doesnt have a driver for it yet, it should install that. Once its done, and once your phone says USB on the bottom of the bootloader screen, you should just be able to run the rom installer on your computer and install it. Good luck!
Thanks for you help, I managed that fine, though I had also wanted to remove the Hardspl I had used to add WM7. I have tried flashing the stock ROM back (via SD card and via USB) to overwrite it, however it fails to install correctly and the phone is being very unstable. Any suggestions!?
According to the thread I used to flash HSPL to my phone, you just make sure youre running a stock rom, then run the HSPL program like you did when you first put on HSPL, but choose 2.08.0000 in the selection screen.
That said, I havent removed HSPL so Im not entirely sure what to do if that doesnt work. If thats what you tried, Im not sure what to tell you
Have tried fiddling again and think I have done it! In the boot screen it now says SPL-2.08 (hopefully this is stock!?) and the phone seems to be behaving! Cheers for your assisstance
Yup, thats stock. No problem
peace warhead said:
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Click to expand...
Click to collapse
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
SMS92 said:
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
Click to expand...
Click to collapse
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
peace warhead said:
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
Click to expand...
Click to collapse
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
imanh said:
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
Click to expand...
Click to collapse
Hmmm I actually havent tried that yet, Ive done pretty much everything aside from reinstalling windows and stuff. I shut off my wireless during the process though because I turned off my antivirus and firewall. Hopefully that will work. WP7 is nice even without being activated, but it certainly doesnt come with many apps.
hi.i have a touch hd quite a while, and i though about flashing it...i read the two sticky threads, but no matter what,when i try to flash my 1.54 spl, via HSPLWrapper_Blackstone_156OliNex.zip , when goes to bootloader, i get a message in my pc and it says that its not connected etc. i updated my drivers (win 7 32bit), via the guide some1 posted,but no results... can someone help? am i missing something here? i tried to use hspl steps.. "Anything but 1.56.OliNex - go to step (HSPL1) on post 2"
r 1.13.25.24
G 1.56.00
when i went to bootloader says spl 1.54 .... any help??
First of all you have to verify that if you connect your device to pc via usb cable, WDMC (Windows Device Mobile Center) starts and recognize your Touch HD.
Proteusmega said:
First of all you have to verify that if you connect your device to pc via usb cable, WDMC (Windows Device Mobile Center) starts and recognize your Touch HD.
Click to expand...
Click to collapse
yes it is connected....when i connect the hd to pc , is connected to activesync directly,as the installation notes says to do.thats what i cant understand.
when is says that the stuff will take 10 mins, and is flips from WDMC connection, and bootloader shows up, it looses the connection there.
but when i generally open the bootloader, it says serial, and then when i plug the usb, it recognises it and it says usb...
Have you shutdown any firewall and antivirus?
If yes, try this:
1 - shutdown your Hd
2 - unplug usb cable
3 - start in bootloader
4 - connect usb cable
5 - start wrapper
If you have problem yet, try another usb cable
Proteusmega said:
Have you shutdown any firewall and antivirus?
If yes, try this:
1 - shutdown your Hd
2 - unplug usb cable
3 - start in bootloader
4 - connect usb cable
5 - start wrapper
If you have problem yet, try another usb cable
Click to expand...
Click to collapse
yes firewall etc all off..
i did what u said,also used the original htc usb cable...now i see the progress bar in my hd... but it stays at 0% ...and the wrapper says error 262
i noticed that when it says updating rom from ...{} to ... 1.56, the from is empty..(it cant read the rom i use...)
Edit: i did it..i used the original cable and all ok...it took 10 seconds.... not 10 mins..
paparoachh said:
i noticed that when it says updating rom from ...{} to ... 1.56, the from is empty..(it cant read the rom i use...)
Click to expand...
Click to collapse
no problem for this, first time I used wrapper I had the same empty field
Have you tried the manual SSPL?
Proteusmega said:
no problem for this, first time I used wrapper I had the same empty field
Have you tried the manual SSPL?
Click to expand...
Click to collapse
no i havent.. i think i've solved my problem for now...i used the original cable and all worked fine...i saw bootloader..says spl 1.56 olinex... so i think i am ok now ..
any stable rom?
paparoachh said:
no i havent.. i think i've solved my problem for now...i used the original cable and all worked fine...i saw bootloader..says spl 1.56 olinex... so i think i am ok now ..
Click to expand...
Click to collapse
Perfect
paparoachh said:
any stable rom?
Click to expand...
Click to collapse
Here on XDA you can find a huge variety of ROM for HTC Blackstone but I can't say which is more stable.
I have tried Energy 29022 Sense2.5 Cookie2.0 Jul.08, it's very beautiful but there is no volume control via hardware keys so I removed after one day of use.
Now I'm testing blackSTONEhenge™ HyPer with Manila 2.5 on my HD and It seem ok.
I suggest you to start with one of these, then search on XDA, look your favourite ROM and test yourself if you like it
I'm glad the paparoachh got this resolved, but please post any further flashing queries in The Dummies Guide thread rather than starting a new thread.
Thread closed