Database Users

Restore original SPL from bootloader

Hi,
Does anyone know how can I restore the original SPL from bootloader ? I try to do it, the progress bar goes to 100% but when I restart it, I still have the HardSPL installed.
Any ideas ?

Use SEARCH please
ygeordy said:
Hi,
Does anyone know how can I restore the original SPL from bootloader ? I try to do it, the progress bar goes to 100% but when I restart it, I still have the HardSPL installed.
Any ideas ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=381600
second post

Thanks for the reply.
I tried that. Unfortunatelly it doesn't work for me. The progress bar goes to 100% and after restart I still have OliNex loader. I don't have the step which says "Unplug cable".
Some other ideas maybe ?

ygeordy said:
Thanks for the reply.
I tried that. Unfortunatelly it doesn't work for me. The progress bar goes to 100% and after restart I still have OliNex loader. I don't have the step which says "Unplug cable".
Some other ideas maybe ?
Click to expand...
Click to collapse
That message appears on the device (on the colored bars screen). Maybe you thought it should appear in Windows.
It worked for me

SuperJMN said:
That message appears on the device (on the colored bars screen). Maybe you thought it should appear in Windows.
It worked for me
Click to expand...
Click to collapse
I know it's on the device. It did, when I did the hard spl. Now when I'm trying to get back to original spl (device stucked in windows boot screen) I don't have that message, but the process goes through. Unfortunately without any result.

ygeordy said:
I know it's on the device. It did, when I did the hard spl. Now when I'm trying to get back to original spl (device stucked in windows boot screen) I don't have that message, but the process goes through. Unfortunately without any result.
Click to expand...
Click to collapse
Stucked windows screen is a different problem. This method is ok only for working device.
In this case this is the only one idea:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.

fktsndr said:
Stucked windows screen is a different problem. This method is ok only for working device.
In this case this is the only one idea:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Click to expand...
Click to collapse
yeah, tried this already also. after I hit task 8 and enter, the device resets, goes to Windows startup screen, get stucked again and just turns off.
Full description off my problem here for whoever wants to help me.
http://forum.xda-developers.com/showpost.php?p=2126848&postcount=31
I fully appreciate any kind of help.

Did you try flash back the original rom?
And I suggest rename this thread for example Stucked in windows screen...
Maybe more people will read it, and try to help you....

fktsndr said:
Did you try flash back the original rom?
And I suggest rename this thread for example Stucked in windows screen...
Maybe more people will read it, and try to help you....
Click to expand...
Click to collapse
I did try to put back a french ROM. I don't know if it was the original because unfortunately when I first flashed it I was kind of beginner in flashing HTC's, but I tried with the only original french ROM that I found on this forum. The process goes through, but yet the result is the same. Is there any kind of command to fully erase (format) the memory (beside the bootloader) and then try to load a ROM ?

Same for me with restoring SPL ...it doesn't work.
And my device is almost at the same state of damage as yours. See my thread...
http://forum.xda-developers.com/showthread.php?t=402765
Also the mtty and task8 just restarts my device. Nothing more, nothing less!
So there is no way of restoring SPL with entering the bootloader manually? Not even a mSD-Card Trick out there? I need to get it done because of warranty ;/

You stucked in Olipro hard-spl, this is why restore spl not works...
And unfortunatelly you can not flash spl with micros-sd.
But you can try to flash rom with micro-sd card.
http://forum.xda-developers.com/showthread.php?t=384084&highlight=guide
Or ask Olipro, maybe he can help you.

Well I am able to flash my Rom the usual way with USB connection.
But no way of restoring the SPL ;(

"So there is no way of restoring SPL with entering the bootloader manually? Not even a mSD-Card Trick out there? I need to get it done because of warranty ;/"
I do not understand exactly...
Did you try restore original spl with manual bootloader?

you run SSPL from Windows Mobile, then flash a stock SPL NBH, job done.
the whole *point* of Hard-SPL is that it can't be overwritten when it performs a flash so that if anything screws up you don't end up locked out of reflashing in the event something screws up.

Olipro said:
you run SSPL from Windows Mobile, then flash a stock SPL NBH, job done.
Click to expand...
Click to collapse
Sounds easy *hehe* BUT i can't access Windows Mobile anymore, that is my big problem. So my device will be picked up by O² in a few days, so i have to get the original SPL back without accessing Windows Mobile ;(
Any suggestion?
@fktsndr: no, thats why i have put a question mark behind it I just need a way of downgrading to the Original SPL without access to Windows Mobile. Maybe i should be sorry for my english

gmc said:
@fktsndr: no, thats why i have put a question mark behind it I just need a way of downgrading to the Original SPL without access to Windows Mobile. Maybe i should be sorry for my english
Click to expand...
Click to collapse
So...
You have hard-spl on your machine
You can not restore spl followed the guide in post 2 (WITHOUT manual bootloader)
You can not access your windows mobile (WM does not boot)
You freeze on startup screen
You can not start you phone with steps in post 6
Am I right?
If yes, you stucked in bootloader. And unfortunatelly I can not help you...Maybe Olipro.

fktsndr said:
So...
You have hard-spl on your machine
You can not restore spl followed the guide in post 2 (WITHOUT manual bootloader)
You can not access your windows mobile (WM does not boot)
You freeze on startup screen
You can not start you phone with steps in post 6
Am I right?
If yes, you stucked in bootloader. And unfortunatelly I can not help you...Maybe Olipro.
Click to expand...
Click to collapse
Well seems like something like this.
See I have no error because of invalid flashing. I had slight water damage. But some days later my device was working again for a whole day.
Next day it didn't work anymore.
When i startup my device and the WM-Splash shows up it makes "bring" and device turns off.
When i plug in the AC charger i can't even get beyond the O2-Splash.
But I can enter the bootloader and flash what I want, it works ;/
I am also able to connect with MTTY, maybe there is a way with repairing it through MTTY?
Full description of my problems here: http://forum.xda-developers.com/showthread.php?t=402765
But if i cant get rid of the problems i have to send it to warranty by tomorrow or monday and i think they will notice that i don't have the original SPL on it. So they will screw me ;(((
So, as I am not a noob to computers I would try ANYTHING to get it back on my own!
Is there also no way of restoring it by using the microSD-Card? So is there no way without Windows Mobile? Not even the holy MTTY? Or any way of debugging it by MTTY to see whats going wrong?
I'm screwed!
P.s. I have also tried another battery in the o² shop....didn't fix it ;(

gmc said:
Well seems like something like this.
See I have no error because of invalid flashing. I had slight water damage. But some days later my device was working again for a whole day.
Next day it didn't work anymore.
When i startup my device and the WM-Splash shows up it makes "bring" and device turns off.
When i plug in the AC charger i can't even get beyond the O2-Splash.
But I can enter the bootloader and flash what I want, it works ;/
I am also able to connect with MTTY, maybe there is a way with repairing it through MTTY?
Full description of my problems here: http://forum.xda-developers.com/showthread.php?t=402765
But if i cant get rid of the problems i have to send it in by tomorrow or monday and i think they will notice that i don't have the original SPL on it. So they will screw me ;(((
Is there also now way of restoring it by using the microSD-Card? So is there no way without Windows Mobile? Not even the holy MTTY? Then i'm really f***ed.
P.s. I have also tried another battery in the o² shop....didn't fix it ;(
Click to expand...
Click to collapse
There is an mtty method on post 6...maybe helps start your phone...
You need working windows mobile to restore-spl.

fktsndr said:
There is an mtty method on post 6...maybe helps start your phone...
You need working windows mobile to restore-spl.
Click to expand...
Click to collapse
Yes but on "task 8" my device doesn't behave as it should be. It just restarts doing nothing.
Seems like i just have to hope the guys at the service center will not recognize my "not original" SPL. 1% chance ;(
Well thanks for now fktsndr.
Seems like there is really no way of restoring it without Windows Mobile ;(
I thought there would maybe be a "Low Level"-Method of accessing the device and restoring SPL.
Can't think of that there is no way of formatting the device on its lowest level (mtty) or transferring the original SPL per MTTY. Hmm...there should always be a way
Olipro, no way? ;(

if I remember right, the polaris hardSPL is based on an MFG bootloader.
this means you can use mtty commands (mw) to unpatch the write protection then flash the stock SPL.
if I don't remember right, and it is not MFG, then you can still use another mtty command with a special file, but this is more complicated and was not fully tested. you can contact me in PM and we can see.
(you could transfer SPL via mtty, but that is also blocked in hardspl because the mtty transfer uses same code to flash the SPL in this SPL common base)
by the way task 8 is exactly designed to just do a soft reset. nothing wrong with that command.
they really meant task 28. this does a hard reset. you can try that. I guess you already did, but just in case!
edit: I just remembered another way if task 28 doesn't help. ifyou don't mind that the device will stop booting SPL, then you can just do task 2a command in mtty. this will erase SPL, and because of hardSPL overwrite protection it will fail to flash it back from the temporary RAM backup.
the result is that the device will not even boot SPL, it will be black screen. it will boot to the radio bootloader only and O2 won't know what SPL was on it before erase.

[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode.

I'm new in these forums as well I'm new with flashing ROMs so obviously I messed up flash process and my device stuck in bootloader (tri-color) mode. This post I address to those unfortunate like me .
# Symptoms #
- ROM flash started and stopped at 17%. After recovery flash process stucks at 0% and pops Connection Error 262. Device is stuck in bootloader mode not possible to flash anything, hard reset does not help, flash from SD card does not help either.
# Possible cause for that #
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
2. Connection between ActiveSync and device was not established when flashing ROM file.
Before to go any further please take your time and read Polaris Wiki to get familiar with glossary and acronyms used here.
PROCEED ONLY if flashing original ROM does not help, hard reset does not help and flash from SD card does not work.
# Solution #
1. Download MTTY software.
2. Kill ActiveSync (Press Ctrl-Alt-Del and stop rapimgr.exe and wcescomm.exe processes).
3. Plug Polaris into usb port (Plug directly not through hubs).
4. Start MTTY after chose USB from PORT dropdown list (if it is not listed there then ActiveSync processes were not stopped).
5. in window type: set 16 0 (enter cmd mode)
6. after type: task 8 (this will format phone)
7. after type: task 0 (this will restart phone. Not always necessary)
8. soft reset
This procedure can damage your phone. Use it as last resort.
Official source in french here.
Now before flashing any ROMs read carefully how to flash (not install!) Hard SPL.
# P.S. about install and flash termins #
This error with flashing happened to my due misunderstanding between notions of installing something on your device and flashing. In my opinion those are completely two different things. As for first I understand of running some cab or exe directly on device. So problem comes when people sees install Hard SPL en device as they try to find some cabs or exes to install directly on device or they just copy all files to device. To make things clear Hard SPL "installation" actually is ROM flash process which must be done with maximum caution, but those who did not read Wiki won't understand it.
Cheers, whitealien

BiG THX @ Whitealien.
works to 100% on my Touch Cruise.
I flashed under Vista Ultimate...
# Solution # ... addition from me for Vista users!
....
2. Start Windows Mobile Device Center and Deaktivate USB Connection and then start Task manager end kill
Process wmdc.exe.
Rest of whitealien. and have fun!

Thank you!!!!
I had given up on this, and was sure my only option was a warranty repair :O

always welcome

Thanks, you've saved my Polaris.
Mine didn't want to react anymore to the soft reset, so I replaced your instruction 8 with:
Cmd>boot
and that did the trick.

whitealien said:
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
Cheers, whitealien
Click to expand...
Click to collapse
I had exactly the same problem, for whatever reason went back to original SPL before HARD SPL.
I solved my issue by using back the original original HTC RUU_signed.nbh and flash it using the CustomRUU.
Thereafter, repeat the entire HARD SPL and flash the home cooked ROM.
Cheers.

For unbricking your HTC Polaris, you can try also a hard-reset (if it is related to a software error):
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html

Thank you very much
you really helped
thank you again

mrfone2003 said:
Thank you very much
you really helped
thank you again
Click to expand...
Click to collapse
you are welcome.
Seems people are still falling for this error.

I'm has this error.
Solution (with SPL-2.20):
- kill ActiveSync (process, not uninstall)
- cable to USB on motherboard
- hard reset on phone
- connect to cable
- flash OFFICIAL rom
Two time I revive my Polaris.

help me please
hi.I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

thanks for the support
Thanks dudes for the great help you gave to recover my htc dual from bootloader screen. I am very happy to have my phone back. Thanks for everybody for the help they have provided generously. I appreciate alot. infact thousands times.

I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.

aaront1988 said:
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
Click to expand...
Click to collapse
Did you follow all steps from 1st post?
Did you kill all running ActiveSync processes?

I did indeed, i'm on vista so didnt have those particular processes going but followed the step from Aeroman and it still doesn't want to play. Any ideas?

managed to find a working XP machine and it worked a treat. Thank you so much.

thanks,this solved my pb

please help
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((

wesram said:
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
Click to expand...
Click to collapse
What did you do to get there?

whitealien said:
What did you do to get there?
Click to expand...
Click to collapse
hey, im sorry for the late reply. it didnt notify me and now after posting several times asking for help in many threads by accident i bumped into this thread again to see that u answered and thank you so much.
now, what i did? this is the wierd thing, i didnt do anything, i went and back to see my phone stuck in bootload .... after this i tried almost everything i can find. from ur solution to flashing original rom to hrd spl to .........
now all gave an error except the original rom (polaris.1.28.415.2), it did went to 100% and device restarted to take me to my nightmare .... another bootloader screen am i suppose to search for polaris 1.28.0000?
i still have now the same writing shown.
please help me with this, its a nightmare .... is it totaly dead???
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader

HTC won't boot after installing NYDITOT Virtual Display, Version 5.02

Hi i have a slight problem.
After installing NYDITOT (sounds like idiot..) Virtual Display, Version 5.02 my htc hangs on smart mobility screen. I tried a soft and than hard reset, but that won't work.
So it thought i try Flashing and changing the device to a new version..
I can start the device in the bootloader screen (thats the only thing i can do at this moment..)
This is wat i see:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
and then serial or usb (when i plug it in)
But than after trying HardSPLWrapper_Blackstone.exe the screen on the pc aswell the screen on the htc stays on 0% and eventualy (after a minute or so) it looses the connection.
(Error 262, communications error)
Then i tried to acces the device though MTTY and this is what i get..
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCE
Cmd>ruurun 0
Command error !!!
Cmd>
hmmm..... help?
Please some help guys, i am running out of options here.
Luckly my Blackstone is realy old.. 1 week
Many thanks!!!

You should check if you have the correct usb drivers installed if you are running a 64 bit system. Also try installing the latest version of mobile device center. Check the troubleshooting section in http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1

tnx for replying
i have tried it on XP-home, XP-professional and Vista. All different pc's..
All gives the same problem as mentioned...

Flash new Rom
Only think I can think of is to boot into USPL and flash a new Rom

Toggs said:
Only think I can think of is to boot into USPL and flash a new Rom
Click to expand...
Click to collapse
Sorry mate, but this is all I can think of as well. Try flashing a new ROM.
Once ROM downloaded, Start BlackStoneCustomRUU.exe and follow the onscreen instruction's.
I'm assuming of course that you already have flashed HardSPL previously?

Hard reset should be sufficient to remove the faulty piece of software for good.

Fallen Spartan said:
Sorry mate, but this is all I can think of as well. Try flashing a new ROM.
Once ROM downloaded, Start BlackStoneCustomRUU.exe and follow the onscreen instruction's.
I'm assuming of course that you already have flashed HardSPL previously?
Click to expand...
Click to collapse
I have not flashed HardSPL previously, i bought it one week ago and just installed a few proggs including that IDIOT virtual display..
So i don't care is i lose the data thats
Can i still try flashing a new ROM even without a HardSPL?
tnx!

stepw said:
Hard reset should be sufficient to remove the faulty piece of software for good.
Click to expand...
Click to collapse
indeed thats what i thought.. however it did not

unimatrix001 said:
indeed thats what i thought.. however it did not
Click to expand...
Click to collapse
Did you Clear Storage of physically Hard Reset?

tnyynt said:
Did you Clear Storage of physically Hard Reset?
Click to expand...
Click to collapse
pfff i feel such a NYDITOT myself, after watching youtube how to HARD-reset a blackstone for dummys, i saw the guy repete it several times when it actually reset itself.. same here also, but it worked
Anyhow it works again jippi!!
thanks everyone!

A dead HD; somebody to reanimate it?!?
Hello guys!
I have synced my HD several times. I have installed also a lot of software (sktools, pocket mechanic, memaid, and other).
The same programs run to my TyTN2 without any problems for more than a year.
After a soft reset it stacked to the start screen (smart mobility).
I have tried even several hard resets; the message appears for factory settings, the hard reset is getting done, but after that the same problem appears again.
I have tried also to flash it, but when i plug it to my PC nothing happens.
I turned it off by removing the battery.
R:1.09.25.14, G: 52.49a.25.26U, D: 1.14.22273
Please somebody helps.
I have searched the date base in the site, but i found nothing relevant.

ROM update freezing

Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks

rikpotts said:
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
Click to expand...
Click to collapse
First of all check your USB cable... and choose another USB port to connect the cable and try to flash your ROM again

Try this as it has been solved before may help you out
http://forum.xda-developers.com/showthread.php?t=425922

same problem
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

Many Thanks for the replies.
I followed the link and i'm confident it will solve my problem. Unfortunately I cannot get mtty to offer "USB" from the dropdown. I remember going round in circles trying to get USB show a few years ago with a SPV C550.
If anyone can help me, that would be great. I'm using Vista. This might be why the steps in both the initial post and replies on the first page don't work for me.

help - cannot succeed flashing rom

I bought a second hand X7500.
I feel sheepy , I tried follow instruction (even for nobes like me) but I can't flash anything.
I got athena x7500, It was cid lock so i tried to unlocked it ,getting no connection error...then I found out I forgot to do kaizer hardspl....and then got error 244 ....
because I complete ignorant I done hard reset and format the micro drive....
and cannot flash any new os ....
please help me

additional info
Can get into bootloader (tri color screen) ,cannot recover old os. (black screen)
ipl-v.1.00
spl-v.1.2.oripro
battary status
p.s. forgive me english its not my native language

I managed to flash it yesterday. I had the same problem as you. It seems that u have succeeded to unlock your athena. The black screen also appeared on my athena, so i was worried that i bricked it. But then i found out it is quite normal, if your have followed the 3 steps olipro SPL. If I am not wrong, the black screen appeared in step 2. so now you flash with a wm 6, then restart from the begining the 3 steps olipro SPL. you can download the wm 6 from here. good luck.
http://forum.xda-developers.com/showthread.php?t=334512
by the way, i am completely disappointed with Athena. It is working extremely slow and it cannot play any videos. So it is a waste of money. I never expected such a poor pda from HTC.

doesn't work

wow, really? Make sure you've read as much as you can about flashing issues before you trash the hardware. It took me 8 different ROMs including 4 temporary bricks before I found the configuration that rocks this thing. My video is smooth (all formats) my camera is far better than my tilts, especially in lower light settings, and with real VGA set to 128, this screen is unmatched. Garmin gets me anywhere and I have no speed problems at all. Don't give up, people.

ouch
I gave up ((

adleron said:
I gave up ((
Click to expand...
Click to collapse
get an spl 1.2 rom from here
http://forum.xda-developers.com/showthread.php?t=397518
put your athena into the bootloader screen and connect to your computer
run the upgrade on your computer
do a hard reset , then things should be fine
you can't boot because there is no image on the athena
Almost it is always possible to recover fron the bootloader screen.

nb file
I have 2 nb files as backup,will it help?

adleron said:
I have 2 nb files as backup,will it help?
Click to expand...
Click to collapse
best to start afresh with one of the packages in the link I referenced.

havn't solve
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen

adleron said:
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen
Click to expand...
Click to collapse
The phone should charge via usb cable , if not try a different cable.
Once the phone is charged (light shows green around the joystick nipple) another option is to flash via SD card
There is a guide to do this in the wiki