I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
blerim said:
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
Click to expand...
Click to collapse
Have you just flashed your device? It looks like it has gone wrong.
If yes Flash again to the original Rom or Wizard Love Rom.
that looks like a g3 ipl and a g4 spl. that's not normal...did you have a g4 device that you tried to flash with a g3 rom?
try this
Push the reset and them hold the camera
after the three colors com on
plug in usb
the usb light comes on you are alive
now if its a g4 then you habve to power out of it grab your manufacures 2,25 -2.xxx update and hit it make sure that your computer is not on hybernate and you screen saver is not on turn off the active sync usb conection.
if it recognizes the device it might take you 20 diferent tries but if it takes you will find your way out.
I bricked 2 from radio updates and the 2nd was a g4 i powered out with fariar 1.69. good luck now the fum begins.
If its a g3 well your in luck find the post data crash
ciao
thanks answer
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
blerim said:
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
Click to expand...
Click to collapse
If you put an HTC Universal ROM in your HTC wizard, you are screwed..
What ROM did you try to flash exactly?
qtek 9100
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
blerim said:
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
Click to expand...
Click to collapse
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
thanks for questions
the-equinoxe said:
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
Click to expand...
Click to collapse
I did nothing and i dont now its a CID or IMEI unlocked
se the foto he not start in windows he block in dos
Related
Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....
Hallo Guru's,
I have a MDA vario fron T-mobile int the netherlands.
I would like to change from netherlands to english and
unlock the phone.
Can somebody link me up 'cos the topics are not helping.
I can't find lokiwiz on the forum to download.
Please help help help!!!
lokiwiz http://forum.xda-developers.com/viewtopic.php?t=33796
ROMs - ftp://xda:[email protected]/Uploads/HTC_Wizard/
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Georgekw said:
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Click to expand...
Click to collapse
I did that and that message was on my screen for about 5-7minutes I think, then something else came written up and in 30seconds the phone rebooted by itself. so maybe try again?
Hi Guys,
Despite the positive ractions on the forum
lokiwiz is not working for me.
I have given up...its so frustrating
Tankx though to all those who tried 2 help
Problem solved With the help of MOTIN
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Re: Problem solved With the help of MOTIN
Georgekw said:
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Click to expand...
Click to collapse
You should tell everyone what youve done wrongly so the same mistake won't happen again
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
i am update my prophet ipl-spl 3.08 when finished update my prophet doesnt work and no work hardrest and no bootloader and no usb connect. plz help me
I have the same problem
Hi there
The problem is the SPL 3.08
This was designed for the charmer so god knows how it made its way to the Prophet. I am still trying to work out a way to clear this and will keep you informed.
The only way to get your prophet to work is to remove the battery for a couple of hours put it back in then plug in the wall charger, if you get a amber light you should be able to start your prophet up again, but the battery will not last long about a day if your lucky.
abolaith81 said:
i am update my prophet ipl-spl 3.08 when finished update my prophet doesnt work and no work hardrest and no bootloader and no usb connect. plz help me
Click to expand...
Click to collapse
i also have same issue pls somebody reply fast it's urgent
thnx in advance
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
soriyn said:
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
Click to expand...
Click to collapse
turn off the device and disconnect the battery as well sim card........ leave without sim card and plug it back battery then take away your device into bootloader mode to reflash again​