i am update my prophet ipl-spl 3.08 when finished update my prophet doesnt work and no work hardrest and no bootloader and no usb connect. plz help me
I have the same problem
Hi there
The problem is the SPL 3.08
This was designed for the charmer so god knows how it made its way to the Prophet. I am still trying to work out a way to clear this and will keep you informed.
The only way to get your prophet to work is to remove the battery for a couple of hours put it back in then plug in the wall charger, if you get a amber light you should be able to start your prophet up again, but the battery will not last long about a day if your lucky.
abolaith81 said:
i am update my prophet ipl-spl 3.08 when finished update my prophet doesnt work and no work hardrest and no bootloader and no usb connect. plz help me
Click to expand...
Click to collapse
i also have same issue pls somebody reply fast it's urgent
thnx in advance
Related
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
blerim said:
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
Click to expand...
Click to collapse
Have you just flashed your device? It looks like it has gone wrong.
If yes Flash again to the original Rom or Wizard Love Rom.
that looks like a g3 ipl and a g4 spl. that's not normal...did you have a g4 device that you tried to flash with a g3 rom?
try this
Push the reset and them hold the camera
after the three colors com on
plug in usb
the usb light comes on you are alive
now if its a g4 then you habve to power out of it grab your manufacures 2,25 -2.xxx update and hit it make sure that your computer is not on hybernate and you screen saver is not on turn off the active sync usb conection.
if it recognizes the device it might take you 20 diferent tries but if it takes you will find your way out.
I bricked 2 from radio updates and the 2nd was a g4 i powered out with fariar 1.69. good luck now the fum begins.
If its a g3 well your in luck find the post data crash
ciao
thanks answer
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
blerim said:
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
Click to expand...
Click to collapse
If you put an HTC Universal ROM in your HTC wizard, you are screwed..
What ROM did you try to flash exactly?
qtek 9100
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
blerim said:
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
Click to expand...
Click to collapse
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
thanks for questions
the-equinoxe said:
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
Click to expand...
Click to collapse
I did nothing and i dont now its a CID or IMEI unlocked
se the foto he not start in windows he block in dos
I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP
reflash
Did you try a reflash?
I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...
I am back on WM2003. Thanx god
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....
I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...
fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English
Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.
navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)
I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.
Guys, i accidently upgrade my pda2 device with a BA rom.I use helmi's wm 6 rom for BA to my pda2 (alpine) it completed the flashing process. now it's dead! no charging light when i try to charge, non of the buttons work, nothing happen when i try to reset, hard reset or other combinations. is there any way to get it back? how can i enter the bootloader menu again?
croesus said:
Guys, i accidently upgrade my pda2 device with a BA rom.I use helmi's wm 6 rom for BA to my pda2 (alpine) it completed the flashing process. now it's dead! no charging light when i try to charge, non of the buttons work, nothing happen when i try to reset, hard reset or other combinations. is there any way to get it back? how can i enter the bootloader menu again?
Click to expand...
Click to collapse
there is no accidently u tried to update stupidly to wm6, there is no excuse for this, and you are now the proud owner of a totaly buggered pda.
serves you right realy, as if you read the forums, u will find there is no wm6 for the xda 2i, and the file you would have used will have stated that it was wm6, 1000%
there is no way of getting it back now... HAHAHAHAHAHAHA!
well unless u can plug it into your pc ang run the 2003se rom.
p.s. how stupid.
Hi!!! I Have the same problem but 1 difference I dont want to update anything ... My PDA was stop and I take out the batery and now is dead no light or system ... what can I DO? HELP ... When I plug in in my PC ... dont do anything
Could anyone can help me to solve No GSM poblem. I think there are many other users have same problem.
After it faild during update rom, My HP6915 represent NO GSM during booting and the phone funcation also doesn't work. But in HP Asset you can see it, just no firmware, no version number. I try to flash english radio rom and french radio rom, but always stop at 1%. This matter appeared after I flashed orange rom(french version). I think it locked by Orange.
Does any one can help us?
did you try the update with no sim and no minsd?
EREZYAD said:
did you try the update with no sim and no minsd?
Click to expand...
Click to collapse
Yes, I update without sim card and minisd. Always stop at 1%
to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck
EREZYAD said:
to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck
Click to expand...
Click to collapse
Thank you for your reply!
I tried but still same, stop at 1% when I flash Radio WAN OS, stop at 2% when I flash Radio FS. I tried to unlock simlock and CID unlock, but it doesn't work on my 6965
called a few places looks like the radio chip is fried. sorry man...not looking good.
try update again with this method
I got almost same problem. I tried to update GSM rom but update fail and my ipaq stuck at hp invent logo. try following steps to see if it works for you
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
I also meet such question.
actualy. I met the same problem "No GSM" after wrong update. I thing I tried everything, but I Didn't try to flash the device via mini-sd card. I don't know the right address for GSM area. Did anyone know?
caoxt said:
I also meet such question.
Click to expand...
Click to collapse
COME ON guys some one can help us , i have too the same problem please help with radio stack !!!!!!!!!
me too,, really nedd help here.. my only phone sable...
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?