Database Users

My SVP M600 phone got stuck at Starting screen

Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.

did you try a hard reset ?

Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.

Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.

I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.

Can any one help me in this regard please.

I am having the same problem, but my phone is not sim-locked.

I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated

Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.

ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!

Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.

yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck

Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.

mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks

(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452

hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin

Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.

collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)

Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.

just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...

Htc p3400 hanged at start up page onyl

Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.

hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset

i had done hard reset also

Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck

Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)

matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!

i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks

for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse

@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse

thasnffffffffff

Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com

gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs

satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved

Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish

It Worked
Thanxxxxxxxx

[GUIDE]How did i Brick my Gene and How i restored ( it was much worse )

Well First i was Using OLD Gene P3400
My Gene came with windows 5.1 in it
I have Upgraded to Windows 6.1 1 year Back
Now when i saw 6.5 i thought to use it Downloaded 6.5 ROM Summit's PRO Users WM 6.5 ROM
And i have Installed it as Mine was already SPL'ed for Olip
And after downloading i have directly Started RomUpdate Untility.exe
and My phone was fine 100 % completed and now Restarting
after Restarting i dont know why But it stuck at the Windows 6.5 Splash Screen from 1 hour then i though i should Upgrade the SPL and i have UPGRADED to Oleref some thing
and thus i Bricked MY GENE OLD
it aint working from then
it Wont even Start
SO i have Pressed HOLD Camara Button and Entered INTO Tri Screen Boot Loader
and tried with GENEIMG.NBH strong into CARD Not Helped
Tried mytty not worked
In middle when i try to update the ROMS i used to get INVALID UPDATE TOOL
tried for 3 hours nothing helping
So i search in Forum and found same problem of 3 ppl
there every one wrote the phone was messed up with some ONL some thing u need to give it to Service centre
for and 1 hour i though i should give it to Service Centre
Then Remembered That "HOW LAZY I AM And will i go to Service center and give the phone lol ? "
NOPE i wont im very lazy so i wont
still searched and TRIED HARD SPL V.1.0 olip
and Tried with my phone now its Back to SPl olip
Now what i did was same used Summit's PRO 6.5 WM and tried Sucess 100 % Completed and it was fine
but again same problem It stuck at SPlash screen for 15 mins +
so again entred into boot screen downloaded Original Shipped Asia OLD GENE WM 6.1 and Installed it
And tada it worked like a CHARM
and now MY GENE is BACK to NORMAL
Thanks to Search and thanks for reading all these **** this may be useful to some one
a quote from me "everything is around you try searching it "
So if have any problem feel free to PM Me
Forgot now im HAPPY
its 4 am now lol
Regards
Mr52

mr521427 said:
so again entred into boot screen downloaded Original Shipped Asia OLD GENE WM 6.1 and Installed it
And tada it worked like a CHARM
Regards
Mr52
Click to expand...
Click to collapse
hi can you post the link to original shipped asia OLD gene wm 6.1 ?

after upgrade to 6.5 screen showing windows mobile 6.5 only
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks

please read the thread before downloading a ROM. Krazy's this ROM has this problem. try any other ROM for OLD GENE, it will work, if your spl version is .olip

problem with my p3400i
hello sir
i got a problem with my p3400i its shortcut are not working
and the notification error is
\windows\pmnotify.exe
what can i do now pls help me

plz help
plz help me getting out of this problum.i have htc p3400 old.i wrong hspl with orif hspl.then i performed mtty.exe process.now in bootloader [tricolour] screen it shows
spl 1.07. oref
now i dont khnow is it bricked.
or it is changed to new gene.
and what i have to do now.
i have nearly tried all roms .but at startup all show error 300.invalid update utilty.please any one who knows that what has happened to my set plz inform me.is it bricked or what happened to it.and now what i have to do.we have no service center in our country.i am from pakistan

Well Sunny Try Original Rom Now u should get from here please search
Install Original Rom first

Device stuck in loop after Rom downgrade

Hello
I have a new Diamond2 that came with wm 6.5 installed.
Well, I prefer 6.1 over 6.5 so I flashed it with a 6.1 ROM.
The flashing went well but after the device is stuck in a start-up loop, it starts up and the "HTC Diamond 2" is seen on the screen, then it shuts down and starts up again, stuck in a endless loop. Only way to stop it is to remove the battery.
What to do????

woodsman said:
Hello
I have a new Diamond2 that came with wm 6.5 installed.
Well, I prefer 6.1 over 6.5 so I flashed it with a 6.1 ROM.
The flashing went well but after the device is stuck in a start-up loop, it starts up and the "HTC Diamond 2" is seen on the screen, then it shuts down and starts up again, stuck in a endless loop. Only way to stop it is to remove the battery.
What to do????
Click to expand...
Click to collapse
Were these official ROMs or are you HSPL'd?
Did you try a hard reset?

Yes, it´s a official ROM (1.39.413.1).
Yes, tried hard reset. Problem still there.
Getting desperate....

I'm having exactly the same problem like you do.
i bought it with WinMo 6.5 Pre-Installed and after downgrading
to the official 6.1 Rom ... The device is stuck at the same endless loop..
my only solution was to remove the battery ,hold the volume down button , re-insert the battery, this will take you to the boot screen you can just reconnect the USB cable and activate ActiveSync ( or Windows Mobile Center )
and Install the official 6.5 ROM again.... all went O.K. but still can't flash the 6.1 ROM,,, only the 6.5
Note: no Hardspl or anything

tornado89 said:
I'm having exactly the same problem like you do.
i bought it with WinMo 6.5 Pre-Installed and after downgrading
to the official 6.1 Rom ... The device is stuck at the same endless loop..
my only solution was to remove the battery ,hold the volume down button , re-insert the battery, this will take you to the boot screen you can just reconnect the USB cable and activate ActiveSync ( or Windows Mobile Center )
and Install the official 6.5 ROM again.... all went O.K. but still can't flash the 6.1 ROM,,, only the 6.5
Note: no Hardspl or anything
Click to expand...
Click to collapse
THANK YOU SO MUCH tornado89, you saved the day!!
It works again!
I don´t know vere you live friend, but if we ever come across each other I will for sure buy you a beer!
Thanks again!

woodsman said:
THANK YOU SO MUCH tornado89, you saved the day!!
It works again!
I don´t know vere you live friend, but if we ever come across each other I will for sure buy you a beer!
Thanks again!
Click to expand...
Click to collapse
HaHa
Free Beer, AWESOME
glad you sorted things out ,,,, +1

the real answer to ur problem was not having hardspl installed. you see, the chaps at HTC assume ull love 6.5 and will never need to go back to 6.1. therefore, they did not code for this situation, and when it does arise, u get stuck in the aptly named "loop".
had u installed Hardspl before installing any rom, then it would have worked flawlessly.
cheers

Skin Is Not Loaded :(

hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends

No Answer ?!
Really ?!
it's very important for me.
plz help

Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.

-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention

DOC format

-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx

It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.