i used this flash
damn i killed my phone i tryed this flash
T-Mobile SDA Users: http://www.smartmobil.no/index.php?...eq=getit&lid=84 (Qtek 8300 ROM)
and now the phone wont boot any help now please please ????
You can try to reninstall your frimware. IF you follow the instructions in the upgrade thread it should be like upgrading your phone from nothing. Which is quite the upgrade
Moblin88 said:
You can try to reninstall your frimware. IF you follow the instructions in the upgrade thread it should be like upgrading your phone from nothing. Which is quite the upgrade
Click to expand...
Click to collapse
yes but i can't get in boot mode i mean phone is total put no power strange??
Hello,
See if you could get into Boot-loader mode. Then just Flash with a good suited ROM from ftp.
Carty said:
Hello,
See if you could get into Boot-loader mode. Then just Flash with a good suited ROM from ftp.
Click to expand...
Click to collapse
the ftp is not ok so how to flash without a boot mode i mean i need to click camera and power buton same time and to reset but after a bad flasg my phone is not powering on how to get into the boot mode thx
Related
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
While in bootloader mode, connect via USB and try to flash down to wm5. It worked with nanoscopic step1 for me. Then i was able to reflash any wm6 again.
What version of ROM you're using??
hugot said:
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
Click to expand...
Click to collapse
No matter what you have, reinstall PDAVietTemp to recover
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
hugot said:
My phone is always in bootloader mode, even after upgrading a new rom...
Any ideas how to get back to "normal" mode....
Thanks
Click to expand...
Click to collapse
If you are upgrading to WM6, you need to HardSPL your prophet.
See this post http://forum.xda-developers.com/showpost.php?p=1718372&postcount=6
Before you do the HardSPL check if you have a G3 or a G4!
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
i have tried to flash my 8125 with shelltool,i have followed all steps till end.
when i try to restart my mobile,nothing happen.
i just put the power to on and i have only the the rom versio which appears on the screen and last like this with nothing else,no windows start nothing even not activesyncro that mean i am even not able to reflash again.
please help
thanks.
faziahasnaine said:
i have tried to flash my 8125 with shelltool,i have followed all steps till end.
when i try to restart my mobile,nothing happen.
i just put the power to on and i have only the the rom versio which appears on the screen and last like this with nothing else,no windows start nothing even not activesyncro that mean i am even not able to reflash again.
please help
thanks.
Click to expand...
Click to collapse
Try this:http://forum.xda-developers.com/showthread.php?t=297097
Bootloader mode, and an oficial ROM
Good luck
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?
kwbr said:
Have tried pulling out the battery? Flashing a stock rom first? Can you enter the tri-color screen? What spl did you install?
Click to expand...
Click to collapse
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off
mehulkarate said:
no i don't install any spl.i try it but my phone will not sync becoz phone was gone start.i wont to start my phone only.
it give one error
device start up failed due to sudden loss of power.please click "yes" to continue.
note.
do not remove battery before device has been completely shutdown off
Click to expand...
Click to collapse
Have you tried flashing a stock rom?
kwbr said:
Have you tried flashing a stock rom?
Click to expand...
Click to collapse
i was find my device id -ELF010050, CID -DOPOD0100 and i flashed my phone with those roms like
1)RUU_Elfin_DOPODASIA_WWE_2.20.707.1G_4.1.13.51_03.07.90_GREEN_Ship_Reduced
2)RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship
3)RUU_Elfin_hTC_Asia_WWE_3.07.707.02_4.1.13.71_03.34.90_BLUE_Ship(frome official web site htc/asia.com)
flashing was complete 100% but my phone don't start from smart mobility.
mehulkarate said:
Hello All,
my device is sticked on smart mobility it going hang on that only
what should i do for start my phone ? i was try to flash my phone but it was gives
207 error.
Click to expand...
Click to collapse
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!
takatori said:
you need version CID and Device ID and the latest version here
and after you finish you can Up rom 6.1-6.5...ect
^^! You remember thank!
Click to expand...
Click to collapse
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.
mehulkarate said:
i know that but my device not cid unlocked so i can't flash Hard-SPL.it going only on bootloader mode.
Click to expand...
Click to collapse
Use a goldcard
recover my elfin
kwbr said:
Use a goldcard
Click to expand...
Click to collapse
hello all
i have recover my elfin and i installed uspl and then update my spl,ipl then flashed by onyx_6_release14 rom so rom run superb.
thanks all