Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
Related
Hi guys,
I just tried to upgrade to the latest o2 Exec ROM, followed all the instructions to the letter ... then the dialog box that says "getting device information.... don't unplug, bla bla" came up and stayed the same for over 70 minutes and decided something isn't right, so I unplugged it.
Now, my exec only shows "USB v1.00" screen ... can't turn it off, and hard reset can't restore anything. It appears my ROM has already been zapped clean ? ...
Arrrggghh, this is driving me nuts. If anyone can tell me how I can get things back to normal, I would be eternally grateful
Chris
the same happened to me.
Connect the usb cable again and try running the setup wizard again.
1) Disconnect your Universal from the cable.
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY.
4) Connect back your Universal via cable.
5) You will hear the connection sound from your computer.
6) Run the install application again.
7) Make sure you DO NOT DISCONNECT the cable this time.
8) RELAX!!!!!! and wait for the update.
I had same problem but this is what I did
1) Hard Reset
This screen pops up
Press0 to restore
Factory default
Press X to exit
2) I pressed X
3) Plugged in USB cable
4) Voila, windows recognises new device, when driver is installed pressed X
ran software utility (rom upgrade) again
All is working, Panic over PHEW!
Phheewwww ... thanks so much you guys, really appreciate all the detailed instructions ... it's upgrading as i post this ... for a moment there, i thought i would have to ship this back to o2 ... He hee ... you guys are the greatest ! :lol:
So guys now that you all have upgraded your universals, is it worth the update ?
I've been running my current one in Basic Mode since getting it and have not experienced any problems yet.
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
fince120 said:
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
Click to expand...
Click to collapse
Which themes?
screen switching is like lightning, definately an improvement.
Overall Id say it seems quicker loading menus
(eg start>programs, Start>settings etc)
I think it was worth it although i shat myself when the upgrade went wrong.
Tut Tut o2, wtf was that all about?
hi guys, i have follow the instruction, and it is not working for me.. any others ideas
thanks
My Method:
1) Connect your Universal from the cable. (Whole step not need disconnect the cable)
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3)This screen pops up
Press0 to restore
Factory default
Press X to exit
4) I pressed 0
5) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY. Wait about 15 seconds!
6) You will hear the connection sound from your computer. (If it appare a wrong connect device message on computer, then retry from step 2 to step 4. This step my need to try many times until hear the connection sound from your computer) [Some times I had repeated three steps twenty times then can success!]
6) Run the install application again.
7) Finish & Reset.
i have done, the step. Due to frustration i have remove the active sync and install a new one. might be this step will no longer use.
thanks any way. is there any other suggestion?..
upgrade completed but still screwed
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Re: upgrade completed but still screwed
leslie lee said:
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Click to expand...
Click to collapse
see your pm
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
leslie lee said:
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Flashing ok for 3rd time also using MaUpgradeUt noID...
I must convey my sincere thanks to u Sirius n Mwang,argh for trying to help.
After the flashing finished I took the dopod off the mini usb cable n reset...reverts to bootloader mode.
tried cold boot ie..on/off button n reset same time..same result
tried hard reset...same result ie back to bootloader screen
am now flashing it for the 4th time(tried not to used MaUpgradeUt noId but come out with ERROR 120 n cannot even flash)
what shall I do?????
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
simba said:
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
Click to expand...
Click to collapse
Thank u Simba
I shall try your suggestions and wish me luck for xmas
many thanks n very much appreciated..
thank u simba
New year is on d way....
BINGO..... yes I made it...
as simba suggested I download the UNI DOPOD rom113.36..extract the executable files ie.
!. Enter BL
2.GetDeviceData
3.RUU.dll
4.UI.dll
5.RUU.Conf
6.MaUpgradeUt noID
into a new folder ..add in the radio file from either rom113.188 or 113.36
and then execute/run MaUpgradeUt noID file......IT WORKS
It therefore may means that DOPOD900 may require the DOPOD EXECUTABLE FILES (so as not to have the same problems as I had over xmas) listed above to upgrade either the CE rom, radio rom or extended rom..
It definitely had been a very interesting xmas...the freeze is finally over n a Better time awaiting, better days ahead n a better YEAR is around d corner...Happy New Year to everyone
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
Hello Everyone
I need big time help. I just bought Hp 6945 and I tried to update GSM rom from 1.02 to 1.08, while updating it says update fail and try to restart Ipaq and start again. Now My problem is Ipaq just stuck to Hp invent logo. I tried to reset and hard reset and remove battery but notthing work.
I need help
Could some please help me to How to fix this problem?
Thank you
same BS happened to me. the only way to fix it is to load the UK 6915 ROM. thats the ONLY way to fix it. AVOID this update do not try to update the radio. I bricked my phone doing this. STILL looking for a solution. Radio stack is daamged.
where Can I find Uk 6915 rom
Thank you for reply. Where can I found the UK 6915 rom. Is there any instruction to How to load rom?
Thank you
If is FIXEDDDDDDDDDD
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
No network connection
Ok everything work fine, but Now I cann't connect to tmobile. It keep showing me no service.
Any Help please
Ok It is fixed again
There is another update at HP website, which is software update. After installing that everything working fine.
can anyone help? i just bricked my ipaq 6965 too. had already followed those few instructions without any success.. what do you mean by "with or without SIM card"?
After a soft reset, mine's stuck at the initial blue/white boot screen.
Hard reset doesn't work (assuming its call + hang up + power + poke reset).
Ideas?
bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845/Ipaq_HW69XX_ENG_ROM.zip.html
download files from rapidshare posted by me ,r tested on my phone
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
garyakw said:
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
Click to expand...
Click to collapse
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
i get error 402.... times out and no can do.... what was that about german language... maybe i just need it spelled out. which screen does the unit need to be in. there is two... monochrome serial vs usb and there is the hp logo blue and white screen frozen indefinitely... please help i love this phone...
Hi, the rapidshare file is missing!
Could you give working link or send me the file to mail, please?
ipaq dude said:
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
Click to expand...
Click to collapse
Man,r u sure the above can work well???? Confusing......I did the above like u indicated,but it's not work on my device HP6915,could u make it in details how u fixed the problem of updating ur device,thanks!
Regards,
Brose
Thanks, This help get me out of freeze
Thanks for posting this link. It brought my hw 6945 back out of the freeze. Stay away from HP's site update. Bad news
johnnynomadic said:
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
Click to expand...
Click to collapse
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Maybe
Most Likely Yes
bmw2320 said:
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Click to expand...
Click to collapse
cdguider said:
Most Likely Yes
Click to expand...
Click to collapse
I don't think so,Curtis.....But as I know most of dopod device hardly be dead....
i have tried to flash my 8125 with shelltool,i have followed all steps till end.
when i try to restart my mobile,nothing happen.
i just put the power to on and i have only the the rom versio which appears on the screen and last like this with nothing else,no windows start nothing even not activesyncro that mean i am even not able to reflash again.
please help
thanks.
faziahasnaine said:
i have tried to flash my 8125 with shelltool,i have followed all steps till end.
when i try to restart my mobile,nothing happen.
i just put the power to on and i have only the the rom versio which appears on the screen and last like this with nothing else,no windows start nothing even not activesyncro that mean i am even not able to reflash again.
please help
thanks.
Click to expand...
Click to collapse
Try this:http://forum.xda-developers.com/showthread.php?t=297097
Bootloader mode, and an oficial ROM
Good luck
Hello every one,
This is my first post at this site but I am a regular visitor and getting help with my windows phones. I am having problem with my HTC mega. It start up normally, shows HTC logo and system information but when it go to windows screen it restarts and the cycle continues till I pull out battery. I have tried lots of stock roms including operetor speific (T-mobile, Orange etc) but no results. I cannot hardspl my phone as it does not go to windows and the jockey's hard spl required active sync or windows mobile data centre connection. Please help me out with the problem. Thanks and regards, Danish
You have to hard reset your phone, but you'll loose all your datas. To do it: turn on the phone and keep pressed volum up+down+end call.
psgarsenal said:
You have to hard reset your phone, but you'll loose all your datas. To do it: turn on the phone and keep pressed volum up+down+end call.
Click to expand...
Click to collapse
Thanks for the reply. I have had it hard reset many times but it doesn't work. Just a while back I had tried with inserting a custom OS and hardspl file in a stock ROM, which i did but phone refused to flash with the nbh file i created. For stock roms it flashes every time with whatever rom i try to flash withbut then again gets restarted at windows screen.
Then I cannot help you, sorry :/
psgarsenal said:
Then I cannot help you, sorry :/
Click to expand...
Click to collapse
Looking for expert opinion for my problem. Any one, please. regards,