Related
Hi guys,
I just tried to upgrade to the latest o2 Exec ROM, followed all the instructions to the letter ... then the dialog box that says "getting device information.... don't unplug, bla bla" came up and stayed the same for over 70 minutes and decided something isn't right, so I unplugged it.
Now, my exec only shows "USB v1.00" screen ... can't turn it off, and hard reset can't restore anything. It appears my ROM has already been zapped clean ? ...
Arrrggghh, this is driving me nuts. If anyone can tell me how I can get things back to normal, I would be eternally grateful
Chris
the same happened to me.
Connect the usb cable again and try running the setup wizard again.
1) Disconnect your Universal from the cable.
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY.
4) Connect back your Universal via cable.
5) You will hear the connection sound from your computer.
6) Run the install application again.
7) Make sure you DO NOT DISCONNECT the cable this time.
8) RELAX!!!!!! and wait for the update.
I had same problem but this is what I did
1) Hard Reset
This screen pops up
Press0 to restore
Factory default
Press X to exit
2) I pressed X
3) Plugged in USB cable
4) Voila, windows recognises new device, when driver is installed pressed X
ran software utility (rom upgrade) again
All is working, Panic over PHEW!
Phheewwww ... thanks so much you guys, really appreciate all the detailed instructions ... it's upgrading as i post this ... for a moment there, i thought i would have to ship this back to o2 ... He hee ... you guys are the greatest ! :lol:
So guys now that you all have upgraded your universals, is it worth the update ?
I've been running my current one in Basic Mode since getting it and have not experienced any problems yet.
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
fince120 said:
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
Click to expand...
Click to collapse
Which themes?
screen switching is like lightning, definately an improvement.
Overall Id say it seems quicker loading menus
(eg start>programs, Start>settings etc)
I think it was worth it although i shat myself when the upgrade went wrong.
Tut Tut o2, wtf was that all about?
hi guys, i have follow the instruction, and it is not working for me.. any others ideas
thanks
My Method:
1) Connect your Universal from the cable. (Whole step not need disconnect the cable)
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3)This screen pops up
Press0 to restore
Factory default
Press X to exit
4) I pressed 0
5) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY. Wait about 15 seconds!
6) You will hear the connection sound from your computer. (If it appare a wrong connect device message on computer, then retry from step 2 to step 4. This step my need to try many times until hear the connection sound from your computer) [Some times I had repeated three steps twenty times then can success!]
6) Run the install application again.
7) Finish & Reset.
i have done, the step. Due to frustration i have remove the active sync and install a new one. might be this step will no longer use.
thanks any way. is there any other suggestion?..
upgrade completed but still screwed
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Re: upgrade completed but still screwed
leslie lee said:
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Click to expand...
Click to collapse
see your pm
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
leslie lee said:
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Flashing ok for 3rd time also using MaUpgradeUt noID...
I must convey my sincere thanks to u Sirius n Mwang,argh for trying to help.
After the flashing finished I took the dopod off the mini usb cable n reset...reverts to bootloader mode.
tried cold boot ie..on/off button n reset same time..same result
tried hard reset...same result ie back to bootloader screen
am now flashing it for the 4th time(tried not to used MaUpgradeUt noId but come out with ERROR 120 n cannot even flash)
what shall I do?????
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
simba said:
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
Click to expand...
Click to collapse
Thank u Simba
I shall try your suggestions and wish me luck for xmas
many thanks n very much appreciated..
thank u simba
New year is on d way....
BINGO..... yes I made it...
as simba suggested I download the UNI DOPOD rom113.36..extract the executable files ie.
!. Enter BL
2.GetDeviceData
3.RUU.dll
4.UI.dll
5.RUU.Conf
6.MaUpgradeUt noID
into a new folder ..add in the radio file from either rom113.188 or 113.36
and then execute/run MaUpgradeUt noID file......IT WORKS
It therefore may means that DOPOD900 may require the DOPOD EXECUTABLE FILES (so as not to have the same problems as I had over xmas) listed above to upgrade either the CE rom, radio rom or extended rom..
It definitely had been a very interesting xmas...the freeze is finally over n a Better time awaiting, better days ahead n a better YEAR is around d corner...Happy New Year to everyone
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
dear all experts ...
I tried to update my Shadow by the new wm6.1 rom.. the first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many) :
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
try to install this on your phone
http://forum.xda-developers.com/showthread.php?t=394478
after that try installing a cooked ROM
Dear sir;
thanks a lot for attention to my problem and ur kind reply.
I already tried to do this but...
* How can I upload sspl/uspl to my phone from bootloader because it's the only mode I can work my phone?
* when I tried to do USPL + RUU it go to 100% and then the phone restart and the RUU program says corrupted image...
then the phone stays in it's state (only can go to bootloader mode).
can I use MTTY program to flash sspl/uspl and USPL and then the new rom? if yes .. how I can do it?
Or what may I do my friend..
thnx a lot again
if you can only get to the bootloader then try flashing to the t mobile rom, then start over
Mee toooooo
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
isfected said:
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
Click to expand...
Click to collapse
Power off the phone
Press and hold the camera and voice keys
Insert the USB cable, Keep holding the camera and voice keys until you get the bootloader screen
Then flash an original ROM.
hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone