Related
Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?
Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath
The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.
If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.
I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT
shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!
I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"
1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.
Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!
I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn
Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull
I can't get my screenprotector removed...not even with tape
Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.
Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.
I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!
Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn
Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks
I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.
Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....
@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
I haven't ever used one, I find they make the screen less responsive. I do have a few scratches on my screen though but they are invisible when the screen is backlit...
GoldCoin said:
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
Click to expand...
Click to collapse
Your screen protector is a must as scratches can appear on your screen very easily without it.
As for the bubbles I've managed to get mine on with only a couple of bubbles around the speaker & 3G camera. Doesn't bother me to much any more
Try this thread as it has a number of recommendations on which is the best screen protector to use
Yes, the screen protector is a must!
Especially for a device with such a huge display. I have read here about cracked displays and I am sure that screen protectors give added resistance against cracking (besides their primary function against scratches).
It takes PATIENCE to apply one though. I wasted 2 before i managed to put one flawlessly (well almost)
Some of the protectors can be washed and re-applied.
Do you really think it has some impact on the way the screen respond ? Does the screen protector makes the bends more noticeable when you press on the center of the screen ?
I've used my Universal for over 3 years with no scrren protector, and there is a mark in the top right where the X icon is but no other issues. However the Universal is a clam shell design so the scrren is protected when it's in my pocket. I don't think I'd want to use the HD without one.
I couldn't fit the screen protector that came with the HD properly because it has to be done with microscopic precision. However I bought 6 protecoter for £3 on Ebay from Ecell and am very happy. They're much easier to fit because they're a fraction smaller, plus you can use a couple to practice with and still have spares left over.
I use the protector from day one and I can't imagine not using it. It's just too much of a risk, and by watching my used protectors, how they're covered with scratches, some of them quite big and quite deep. I would not want to have this permanently on my screen.
I have bought some additional protectors as well. I predict I will be changing protectors every 3 or 4 months.
I have no idea why everyone seems to have so much problems with applying them. It was very easy for me to apply both the stock protector and the Brando protector. Just clean the front screen as thoroughly as possible with a piece of cloth that does not leave those small fabric hairs. I used a cleaning cloth for glasses, and put a few drops of window cleaning fluid as well to remove eventual grease.
After that it was piece of cake. Started at the top and just rolled down the protector in one smooth move. Had 1 bubble, which I simply pushed to the edge of protector until it was gone.
I reccomend you do all of this in a dust-free environment. Bathroom is a good place, for example. Let the dust settle for like 20 minutes before going in. Avoid rooms which have carpets and such stuff.
I used mine for the first month+ without the screen protector and sustained no scratches. I have one on now simply because one day I was putting stuff away, saw the screen protector, put it to my HD and it went on perfectly without trying, so I decided to keep it on.
GoldCoin said:
How.....unnoticeable?
Click to expand...
Click to collapse
GoldCoin,
Have you tried buying on from a phone shop and asking them to install?
I installed mine as soon as I removed the "do not sit down with the HD in your pocket warning" Best way to ensure that the screen is clean. Took a couple of attemps to get it started but a little effort and I got it. Left with a small bubble round the ear piece and one top right, but that looks like a slight defect in the protector as the alignment looks almost perfect.
When installing, I peeled back a portion of the protector and aligned it best I could - incidentally, I placed the HD back in the foam that it came in to hold it firm. Without peeling any more off I try to gauge the alignment. If I think is good to go, I slowly peel the backing whilst rubbing my finger back and forth across the area just stuck down.
Here's another suggestion. PSP Screen Protector installation
Good Luck,
Yes, it's a must!
I use a screenprotector and it has lot's of scratches on it, which otherwise would be on the screen itself
Absolutely!
I Use clear-coat and are very satisfied (had it on my diamond as well and have it on my psp)
Once you get a mark on the display u will regret going without.
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Bubbles are not problem. After installing screen protector just take you credit card. You can remove all bubbles with credit card.
Just adding my two pennies worth. I haven't ever used a screen protector on any of my previous phones. However Touch HD is a little bit special (as we know) so I invested. The one that came with was utter....well it was naff. I bought an invisible shield but some areas didn't dry and adhese correctly....so I opted for Exim...now this was awesome....a few attempts later and I have it installed with no bubbles at all using a credit card to apply.
(Top Tip: use selotape to remove any unwanted dirt from the screen before installing....the static tends to draw dust to it straight out of the packet....helped me anyway!)
GoldCoin said:
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Click to expand...
Click to collapse
For what it's worth, it wouldn't hurt to use a can of dust remover or compressed air to spray the area before applying. Worked for me. Just a thought.
Does the normal screen protector that comes in the box makes the screen feels like bending when u press on it ? in the center specifically ? and makes you need to press harder when u tap ?
Invisible shield on mine and wouldn't be without a screen protector on any of my devices with my way of using them and pocketing them they tend to get scratched but loving the invisible shield. Should be installed at the factory imo
Jezwick said:
... I find they make the screen less responsive....
Click to expand...
Click to collapse
I've always used one, XDA mini, Kaiser and now the THD.
In all cases I've found the sensitivity is affected but to varying degrees.
In each case I've used tweaking tools to change the sensitivity back to acceptable levels.
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Xeon said:
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Click to expand...
Click to collapse
I haven't experienced this with the Exim protector I am using. In fact...it's as though there is nothing there....even when swiping!
So, I was putting on my InvisibleSHIELD full body armor earlier... but no matter what I did there are still quite a few small bubbles under the screen protector. The sides and the back are fine except for the piece between the headset port and the proximity sensor where it leaves with a bit of space which won't fit perfectly around the corner.
Will the bubbles on the front screen gone after a while? What should I do with that piece next to the proximity sensor?
Thanks!
QuadESL63 said:
So, I was putting on my InvisibleSHIELD full body armor earlier... but no matter what I did there are still quite a few small bubbles under the screen protector. The sides and the back are fine except for the piece between the headset port and the proximity sensor where it leaves with a bit of space which won't fit perfectly around the corner.
Will the bubbles on the front screen gone after a while? What should I do with that piece next to the proximity sensor?
Thanks!
Click to expand...
Click to collapse
Did you remove the pre installed Screen Protector?, which imo does a very good job and is the first phone I have owned installed from the factory.
Give it 2 days. All the microbubbles will go away.
I put this on my 17" laptop. It was next to impossible to remove them, but after several days they all went away.
Im still waiting do install mine, the 12hours dry time just makes it a little hard.
ronnyuk said:
Did you remove the pre installed Screen Protector?, which imo does a very good job and is the first phone I have owned installed from the factory.
Click to expand...
Click to collapse
Its hard to call it screen protector. I already have few scratches with using the pouch. So from me i can only give it a big D.
yoshik777 said:
Im still waiting do install mine, the 12hours dry time just makes it a little hard.
Its hard to call it screen protector. I already have few scratches with using the pouch. So from me i can only give it a big D.
Click to expand...
Click to collapse
Well it's doing it's job then as the screen protector, you will hopefully always be able to take off the factory installed protector and find a pristine screen underneath.
I hate fitting screen protectors myself, they always looks a mess so I am glad that this phone came with one factory fitted.
My factory fitted screen protecting film was set quite badly, it had little wrinkle and couple big air bubbles so I took it away and set the one that came with the phone, its been working good except lately it has start going off from my screen corner for no reason? it just won't stick anymore.
2 3 days and bubbles will be all gone worked on mine..... invisibleshield works really well
If you end up with any larger bubbles or some that don't seem to go away (which most all of them should disappear on their own) you can get yourself a very fine needle and poke as small a hole in the bubble as possible and use a damp cloth to push out the air.
Put one on my old iphone and as soon as i did my dog took to the texture and started chewing it I ended up with a "flap" if you will and even that smoothed out nicely over time. Great product, although the smaller pieces will eventually start peeling off at the edges. Mine is in the mail from Zagg for my new X10. Being very careful with it until then.
Double screen protection
When you opened the box the screen has a film used for shipping. Some have said that this film was bubbled. Than under that film is real screen protector that is already attached to the phone. A second screen protector is in the box and is an extra.
To be clear there are three films to protect the screen.
1) shipping film covering the screen and a screen protector that is attached underneath this to the screen itself. (often bubbled) (easy to remove)
2) the actual screen protector that is already attached to the screen and is under the shipping film. (look very closely and you can see the edge) (will not come off easily)
3) spare screen protector to be used at a later time.
Sounds to me like you boys put a screen protector on top of a screen protector
There was already a real screen protector? like i thought i saw on my htc touch? which was hard to pull of but i did it, after that the phone didn't react to touching anymore, oops! it was the layer of the screen responsible for receiving pressure from touching.. i hope it isnt the same with this phone.. that would really suck
onigiri said:
There was already a real screen protector? like i thought i saw on my htc touch? which was hard to pull of but i did it, after that the phone didn't react to touching anymore, oops! it was the layer of the screen responsible for receiving pressure from touching.. i hope it isnt the same with this phone.. that would really suck
Click to expand...
Click to collapse
well the touch had a resistive type screen the x10 has a capacitive type.
so peelin of the pre applied on the x10 makes no diff.
but remember the pre applied film is less a screen protector and more a shatter proof sheet which helps to keep the piece of glass together in case the screen breaks..
ok, thanks for the information, now i know it wont kill my phone to take it off, which im not going to do, also then i know i dont have to be worried to death about scratching my screen
Sent from my X10i using the XDA mobile application powered by Tapatalk
so I really cant tell here if you guys have removed the factory installed protector prior to placing the Zagg sheild on or not.
If yes, how the heck did you get it off?? And if no, did it seem to affect the responsiveness of the screen?
I have my protector and I just want to make sure whether or not I should or should not remove the film (protector or not it is frigin on there......tight).
I just peeled of the preinstalled screen protector with my fingernails (i probably have to cut them ). It took me about 30 secs and was quite easy to do. I wouldn't recommend anything sharper than your fingernails. Using your own body is the easiest way, because you have full control of your finger and get a "feedback" on how to remove the screen protector.
My InvisibleSHIELD is drying since 18 hours and I'm gonna wait till it dried 24 hours. I'll tell you in a few hours if there are any differences between a XPERIA with a preinstalled screen protector and a XPERIA without a preinstalled screen protector but an InvisibleSHIELD.
Have a nice day
well I just went ahead and put the screen on right over the preinstalled one, and I must say that I got it on there about as precisely as is possible. No bubbles and it looks great! Also no change in screen responsiveness as im using right now with swype keyboard. Works perfect.
Sent from my X10a using the XDA mobile application powered by Tapatalk
Ok, I couldn't wait to use my phone again, so I powered it on and in case of responsiveness there aren't any changes with the preapplied one removed and the InvisibleSHIELD installed. I'm even more amazed by the white one now, because it now has some kind of grip on its backside. Before installing the shield it was definitively too slippery.
any one with recommendation on screen protector
I'm currently using a Zagg max coverage protector that I had installed at Best Buy, and have no complaints so far. The only thing I've noticed with it is that my finger tends to get stuck when using Swype, but not often enough for it to bother me.
I don't have this phone but I don't think you need a screen protector. I haven't seen any videos on the screen durability test like they do for the iphone scratch test. But I think the screen should be sturdy enough. The screen won't be as smooth to scroll with a plastic layer. And if you accidentally get even a drop of water in the corners of the phone with the squeegee, you are screwed. Good luck.
Using an Invisible Shield on mine. This is the only phone I've ever used one on. I figured with a screen this huge I want to keep it looking nice.
You don't need you it is glass like the Iphone and hero. I have seen test's on both using key to try and scratch nothing happened. Anything that would damage the screen (scratch it) would go right through the screen protector and still damage it. As it would take a lot of force to scratch. Just a wast of money not to mention it hampers the touch screens ability to pick up your finger.
someone apparently water damaged their evo with putting on a protector. Careful. I would cover up the indicator on mine once I get it.
i have a zagg on mine and hate it. its sticky and has a "orange peel" like appearence. i ordered a hard plastic one on amazon and am waiting for it to come in the mail.
I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.
Zaag one here and I think it's too sticky. It messes with my swiping. Catches my finger too much.
chazglenn3 said:
I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.
Click to expand...
Click to collapse
I used the same logic with my hero and ended up getting a few scratches just from unforseen sh!t happening. this screen is too beautiful for me to risk.
also whoever water damaged their phone while putting on a screen protector is an idiot.
I put one on for peace of mind and it works just as it did without the protector.
However, if it's like the iPhone screen, then you shouldn't need one at all. I had the same iPhone since the release date and had zero scratches as of Friday... it's last day in service!
We pre-ordered out Evo's at RS so we used out accessory credits for Zaggs and car chargers and I put them on. They do have an orange peel like look when looking at them at a angle with the screen off and reflecting off some light. But with the screen on and looking at them there is no issue with the display. They were not hard to put on either.
I'm using the "anti-glare" protector that comes in the 3-pack you get at the Sprint store for $12 (the other two are "clear"). I love it - it doesn't interfere with my user experience at all. Why on earth would you risk scratching your screen? To save $4 and 5 mins time?
Boxwave Crystal Clear screen protectors. I have a 3-pack on order (I have 2 Evo's between me and my girlfriend). We're using them "naked" so far until they arrive.
I highly recomend the Boxwave protector though, I have used them for about 6+ years on various PDA/Smartphones. I even have one for my P&S Camera.
Here is my experience:
Zagg:
Good -
Works well as protection
Hides fringer prints decently
Bad -
Blurs your screen a very small amount
Makes the surface feel like rubber
Hard to put on without getting a little dust under it
Generic hard plastic sheet:
Good -
Works well as protection
Feels very smooth, smoother than glass
Easy to put on, and normally you get 2 or 3 in case you make a mistake
Perfectly clear
Bad -
Finger print magnet, oil really builds up
You can see where the protector ends around the edges
Added glare in sunlight(small amount)
Unprotected Glass:
Good -
Feels very smooth
Easy to clean off, just rub it off on your shirt
Perfectly clear
Bad -
Medium finger print problem, but easy to clean
I feel scared to place it face down, once I get a case that recesses the face I will feel better.
Over all I decided to go with unprotected. Its the middle of the road and I feel the best over all experience.
Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.
zone23 said:
Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.
Click to expand...
Click to collapse
Agreed, the Zagg is sticky. But I deal with it so that I can protect it. I don't have a huge issue with viewing it or the orange peel look when it's off because you don't notice it when it's on. The fit is nice. On my hero, I had a really clear smooth one from ebay which was great, but was all scratched up. The zagg shouldn't even mark up which is why i'm dealing with it. Sticky, but not to the point that it pisses me off. I put it on myself relatively easily, just spray lots of that solution on it, no bubbles, no dust, 2 minute application.
Maybe the Zagg is sticky if you put it on backwards but I have ZERO complaints about mine.
I ordered a 3 pack of anti-glare/anti-fingerprint screen covers from handhelditems for 7.99 (for the 3pack). They have crazy deals on evo 4g accessories right now. I also got a car charger for like 3.99.
I bought it more for the anti-glare/anti-fingerprints than the actual screen protection.
Warning!
There is a whole thread started on water damage and most of this comes from any screen protector that requires you to spray on water... ei Zaggs
When you squeegiie the water off the screen it leaks in to the back of the phone and Sprint has been sneaky about placing water damage indicator right on the tip of the phone.. below battery.
Either cover the indicator with protector or stick to the regular screen covers..
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!