How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
I haven't ever used one, I find they make the screen less responsive. I do have a few scratches on my screen though but they are invisible when the screen is backlit...
GoldCoin said:
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
Click to expand...
Click to collapse
Your screen protector is a must as scratches can appear on your screen very easily without it.
As for the bubbles I've managed to get mine on with only a couple of bubbles around the speaker & 3G camera. Doesn't bother me to much any more
Try this thread as it has a number of recommendations on which is the best screen protector to use
Yes, the screen protector is a must!
Especially for a device with such a huge display. I have read here about cracked displays and I am sure that screen protectors give added resistance against cracking (besides their primary function against scratches).
It takes PATIENCE to apply one though. I wasted 2 before i managed to put one flawlessly (well almost)
Some of the protectors can be washed and re-applied.
Do you really think it has some impact on the way the screen respond ? Does the screen protector makes the bends more noticeable when you press on the center of the screen ?
I've used my Universal for over 3 years with no scrren protector, and there is a mark in the top right where the X icon is but no other issues. However the Universal is a clam shell design so the scrren is protected when it's in my pocket. I don't think I'd want to use the HD without one.
I couldn't fit the screen protector that came with the HD properly because it has to be done with microscopic precision. However I bought 6 protecoter for £3 on Ebay from Ecell and am very happy. They're much easier to fit because they're a fraction smaller, plus you can use a couple to practice with and still have spares left over.
I use the protector from day one and I can't imagine not using it. It's just too much of a risk, and by watching my used protectors, how they're covered with scratches, some of them quite big and quite deep. I would not want to have this permanently on my screen.
I have bought some additional protectors as well. I predict I will be changing protectors every 3 or 4 months.
I have no idea why everyone seems to have so much problems with applying them. It was very easy for me to apply both the stock protector and the Brando protector. Just clean the front screen as thoroughly as possible with a piece of cloth that does not leave those small fabric hairs. I used a cleaning cloth for glasses, and put a few drops of window cleaning fluid as well to remove eventual grease.
After that it was piece of cake. Started at the top and just rolled down the protector in one smooth move. Had 1 bubble, which I simply pushed to the edge of protector until it was gone.
I reccomend you do all of this in a dust-free environment. Bathroom is a good place, for example. Let the dust settle for like 20 minutes before going in. Avoid rooms which have carpets and such stuff.
I used mine for the first month+ without the screen protector and sustained no scratches. I have one on now simply because one day I was putting stuff away, saw the screen protector, put it to my HD and it went on perfectly without trying, so I decided to keep it on.
GoldCoin said:
How.....unnoticeable?
Click to expand...
Click to collapse
GoldCoin,
Have you tried buying on from a phone shop and asking them to install?
I installed mine as soon as I removed the "do not sit down with the HD in your pocket warning" Best way to ensure that the screen is clean. Took a couple of attemps to get it started but a little effort and I got it. Left with a small bubble round the ear piece and one top right, but that looks like a slight defect in the protector as the alignment looks almost perfect.
When installing, I peeled back a portion of the protector and aligned it best I could - incidentally, I placed the HD back in the foam that it came in to hold it firm. Without peeling any more off I try to gauge the alignment. If I think is good to go, I slowly peel the backing whilst rubbing my finger back and forth across the area just stuck down.
Here's another suggestion. PSP Screen Protector installation
Good Luck,
Yes, it's a must!
I use a screenprotector and it has lot's of scratches on it, which otherwise would be on the screen itself
Absolutely!
I Use clear-coat and are very satisfied (had it on my diamond as well and have it on my psp)
Once you get a mark on the display u will regret going without.
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Bubbles are not problem. After installing screen protector just take you credit card. You can remove all bubbles with credit card.
Just adding my two pennies worth. I haven't ever used a screen protector on any of my previous phones. However Touch HD is a little bit special (as we know) so I invested. The one that came with was utter....well it was naff. I bought an invisible shield but some areas didn't dry and adhese correctly....so I opted for Exim...now this was awesome....a few attempts later and I have it installed with no bubbles at all using a credit card to apply.
(Top Tip: use selotape to remove any unwanted dirt from the screen before installing....the static tends to draw dust to it straight out of the packet....helped me anyway!)
GoldCoin said:
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Click to expand...
Click to collapse
For what it's worth, it wouldn't hurt to use a can of dust remover or compressed air to spray the area before applying. Worked for me. Just a thought.
Does the normal screen protector that comes in the box makes the screen feels like bending when u press on it ? in the center specifically ? and makes you need to press harder when u tap ?
Invisible shield on mine and wouldn't be without a screen protector on any of my devices with my way of using them and pocketing them they tend to get scratched but loving the invisible shield. Should be installed at the factory imo
Jezwick said:
... I find they make the screen less responsive....
Click to expand...
Click to collapse
I've always used one, XDA mini, Kaiser and now the THD.
In all cases I've found the sensitivity is affected but to varying degrees.
In each case I've used tweaking tools to change the sensitivity back to acceptable levels.
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Xeon said:
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Click to expand...
Click to collapse
I haven't experienced this with the Exim protector I am using. In fact...it's as though there is nothing there....even when swiping!
Related
Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?
Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath
The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.
If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.
I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT
shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!
I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"
1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.
Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!
I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn
Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull
I can't get my screenprotector removed...not even with tape
Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.
Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.
I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!
Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn
Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks
I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.
Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....
@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!
(Not sure if there has been a post about this, apologies if there has.)
Just wanted to let everyone know that I had a fairly big scratched area, right where I write the letters for the Letter Recogniser SIP which was very annoying as it prevented the stylus from gliding smoothly. I heard that I should use Brasso (~£1.30 from your local supermarket) on the screen and it has been VERY successful. It's completely removed the scratch.
Just apply a small amount with a cotton-bud and work into the screen in circlular motion (press harder for deeper scratches). Keep doing this for about 10-15 times or until the scratch disappears.
Hope this helps anyone with screen scratches or anyone wondering about using Brasso but too scared to try.
Careful
I wouldn't recommend it as too much brasso will affect the screen, It's not just an abbrasive but solvent too so you will melt the plastic screen. Over-use will make the screen look warped.
I tried this on my M500 ages ago; now if HTC have improved on the screen then hey.. go ahead but don't say I didn't warn you.
Screen protectors are a much better option. If the screen is already marked a protector would give you a smooth finish again. If thats to expensive an option clear contact sheet will also offer the same results and a roll of that will give you screen covers for the rest of your natural life.
it would not "melt" the screen - how misguided. it is a mild solvent and abrasive and so is unlikely to cause much harm to the screen unless used constantly. screen protectors look awful on a screen - especially when the device is off.
http://www.mobilecomputermag.co.uk/2007100487/my-laptop-screen-is-scratched.html
Off topic a bit. I bought an expensive screen protector from Brando.. it works very well.. but.. for some reason it (the screen protector) got scratched. any easy way to solve it? Brasso is ok? I thought if there can be any method of using .. say car wax to fill in the grooves of the scratch.
I think it got scratched when stuff like sand got attached to my face and when I list to the phone, it stick onto the scren pctr.. and when I write on it.. it got scratched.
Just be happy you had the screen protector on!
I tried to take out the scratches from the plastic cover on my Casio watch with (Crest) toothpaste and it worked FANTASTIC!!!
Thanks a lot to the Guy who suggested this solution for PDA screens.
Damage to screen with brasso
rich1986 said:
it would not "melt" the screen - how misguided. it is a mild solvent and abrasive and so is unlikely to cause much harm to the screen unless used constantly. screen protectors look awful on a screen - especially when the device is off.
Click to expand...
Click to collapse
OK it doesn't melt the screen off but it gives it a warped look if you reflect light off it.
No tricks can help
Do not fool yourself. Brasso, toothpaste, Displex all leave marks on the screen. Check it with the device off in sunlight or a strong light source.
Brando protector is expensive.
Cheap and perfect is a new digitizer (USD 8).
I just ordered two more. And whenever I get a scratch and I have time I replace it.
hmmm... Brando's protector is selling for 9-10 dollars - you can easily find cheaper alternatives.
I guess the time and hassles (and of course the warranty alone) of replacing the actual digitizer don't really worth the few bucks saved.
So, I was putting on my InvisibleSHIELD full body armor earlier... but no matter what I did there are still quite a few small bubbles under the screen protector. The sides and the back are fine except for the piece between the headset port and the proximity sensor where it leaves with a bit of space which won't fit perfectly around the corner.
Will the bubbles on the front screen gone after a while? What should I do with that piece next to the proximity sensor?
Thanks!
QuadESL63 said:
So, I was putting on my InvisibleSHIELD full body armor earlier... but no matter what I did there are still quite a few small bubbles under the screen protector. The sides and the back are fine except for the piece between the headset port and the proximity sensor where it leaves with a bit of space which won't fit perfectly around the corner.
Will the bubbles on the front screen gone after a while? What should I do with that piece next to the proximity sensor?
Thanks!
Click to expand...
Click to collapse
Did you remove the pre installed Screen Protector?, which imo does a very good job and is the first phone I have owned installed from the factory.
Give it 2 days. All the microbubbles will go away.
I put this on my 17" laptop. It was next to impossible to remove them, but after several days they all went away.
Im still waiting do install mine, the 12hours dry time just makes it a little hard.
ronnyuk said:
Did you remove the pre installed Screen Protector?, which imo does a very good job and is the first phone I have owned installed from the factory.
Click to expand...
Click to collapse
Its hard to call it screen protector. I already have few scratches with using the pouch. So from me i can only give it a big D.
yoshik777 said:
Im still waiting do install mine, the 12hours dry time just makes it a little hard.
Its hard to call it screen protector. I already have few scratches with using the pouch. So from me i can only give it a big D.
Click to expand...
Click to collapse
Well it's doing it's job then as the screen protector, you will hopefully always be able to take off the factory installed protector and find a pristine screen underneath.
I hate fitting screen protectors myself, they always looks a mess so I am glad that this phone came with one factory fitted.
My factory fitted screen protecting film was set quite badly, it had little wrinkle and couple big air bubbles so I took it away and set the one that came with the phone, its been working good except lately it has start going off from my screen corner for no reason? it just won't stick anymore.
2 3 days and bubbles will be all gone worked on mine..... invisibleshield works really well
If you end up with any larger bubbles or some that don't seem to go away (which most all of them should disappear on their own) you can get yourself a very fine needle and poke as small a hole in the bubble as possible and use a damp cloth to push out the air.
Put one on my old iphone and as soon as i did my dog took to the texture and started chewing it I ended up with a "flap" if you will and even that smoothed out nicely over time. Great product, although the smaller pieces will eventually start peeling off at the edges. Mine is in the mail from Zagg for my new X10. Being very careful with it until then.
Double screen protection
When you opened the box the screen has a film used for shipping. Some have said that this film was bubbled. Than under that film is real screen protector that is already attached to the phone. A second screen protector is in the box and is an extra.
To be clear there are three films to protect the screen.
1) shipping film covering the screen and a screen protector that is attached underneath this to the screen itself. (often bubbled) (easy to remove)
2) the actual screen protector that is already attached to the screen and is under the shipping film. (look very closely and you can see the edge) (will not come off easily)
3) spare screen protector to be used at a later time.
Sounds to me like you boys put a screen protector on top of a screen protector
There was already a real screen protector? like i thought i saw on my htc touch? which was hard to pull of but i did it, after that the phone didn't react to touching anymore, oops! it was the layer of the screen responsible for receiving pressure from touching.. i hope it isnt the same with this phone.. that would really suck
onigiri said:
There was already a real screen protector? like i thought i saw on my htc touch? which was hard to pull of but i did it, after that the phone didn't react to touching anymore, oops! it was the layer of the screen responsible for receiving pressure from touching.. i hope it isnt the same with this phone.. that would really suck
Click to expand...
Click to collapse
well the touch had a resistive type screen the x10 has a capacitive type.
so peelin of the pre applied on the x10 makes no diff.
but remember the pre applied film is less a screen protector and more a shatter proof sheet which helps to keep the piece of glass together in case the screen breaks..
ok, thanks for the information, now i know it wont kill my phone to take it off, which im not going to do, also then i know i dont have to be worried to death about scratching my screen
Sent from my X10i using the XDA mobile application powered by Tapatalk
so I really cant tell here if you guys have removed the factory installed protector prior to placing the Zagg sheild on or not.
If yes, how the heck did you get it off?? And if no, did it seem to affect the responsiveness of the screen?
I have my protector and I just want to make sure whether or not I should or should not remove the film (protector or not it is frigin on there......tight).
I just peeled of the preinstalled screen protector with my fingernails (i probably have to cut them ). It took me about 30 secs and was quite easy to do. I wouldn't recommend anything sharper than your fingernails. Using your own body is the easiest way, because you have full control of your finger and get a "feedback" on how to remove the screen protector.
My InvisibleSHIELD is drying since 18 hours and I'm gonna wait till it dried 24 hours. I'll tell you in a few hours if there are any differences between a XPERIA with a preinstalled screen protector and a XPERIA without a preinstalled screen protector but an InvisibleSHIELD.
Have a nice day
well I just went ahead and put the screen on right over the preinstalled one, and I must say that I got it on there about as precisely as is possible. No bubbles and it looks great! Also no change in screen responsiveness as im using right now with swype keyboard. Works perfect.
Sent from my X10a using the XDA mobile application powered by Tapatalk
Ok, I couldn't wait to use my phone again, so I powered it on and in case of responsiveness there aren't any changes with the preapplied one removed and the InvisibleSHIELD installed. I'm even more amazed by the white one now, because it now has some kind of grip on its backside. Before installing the shield it was definitively too slippery.
I just got my dock and I noticed that there is very little space between the dock "slots" and the screen. If I install a screen protector (I already ordered one from Skinomi) do you think it will be too thick to use the dock? I am afraid the dock slots will push against the screen protector and smudge it or worse rip it.
tackyjan said:
I just got my dock and I noticed that there is very little space between the dock "slots" and the screen. If I install a screen protector (I already ordered one from Skinomi) do you think it will be too thick to use the dock? I am afraid the dock slots will push against the screen protector and smudge it or worse rip it.
Click to expand...
Click to collapse
I have the screen protector and the back skin.
Trust me, they will fit. It really isn't thick at all.
But, do be careful when you are installing them on the device. Use a lot of that water spray they give you. I think I saw a suggestion to dip the screen in a bath of water first. I used too little and had to redo it because the bubbles stayed. Now, the outer edge from where I re-peeled the protected doesn't stick to the device. It isn't too big to annoy me but it definitely doesn't look nice.
Because the screen is bigger on a tablet than on a phone, the application is just more frustrating to put on.
Oh, and just note that your screen will look like crap. It'll take a day or two to kick in.
strikethreeout said:
I have the screen protector and the back skin.
Trust me, they will fit. It really isn't thick at all.
But, do be careful when you are installing them on the device. Use a lot of that water spray they give you. I think I saw a suggestion to dip the screen in a bath of water first. I used too little and had to redo it because the bubbles stayed. Now, the outer edge from where I re-peeled the protected doesn't stick to the device. It isn't too big to annoy me but it definitely doesn't look nice.
Because the screen is bigger on a tablet than on a phone, the application is just more frustrating to put on.
Oh, and just note that your screen will look like crap. It'll take a day or two to kick in.
Click to expand...
Click to collapse
Thanks for the info!
tackyjan said:
I just got my dock and I noticed that there is very little space between the dock "slots" and the screen. If I install a screen protector (I already ordered one from Skinomi) do you think it will be too thick to use the dock? I am afraid the dock slots will push against the screen protector and smudge it or worse rip it.
Click to expand...
Click to collapse
I have one installed on my transformer. A few things about it.
1.) It does fit, makes sure to get the up part up. Look for the two holes for the camera. I screwed mine up and placed it on wrong, still works.
2.) The screen protector works very well with the dock, with out ripping or tearing. If you hold the tablet, you will see the edge of the screen is thinner then the area where the dock fully ends. This creates a impression in the screen protector where it is too snug. I have not notice any problems with it fitting in the dock, but it is snug enough to leave an impression.
3.) The quality of the shield is not up the same as bodyguardz or invisible shield. It has a tendency to dent and cut up pretty easy. Not insanely, but there is a difference between it and my phone, bodyguardz.
4.) The protector is very shiny and smooth. Which means you don't get the orange peel effect of the other protectors, but does not help viewing in sunlight.
5.) You need to makes sure you use ALL of the solution provided. It takes a lot more water and baby shampoo then the other protectors. Probably bigger screen and bigger protector, but I swear the sticky side is more sticky then the other protectors.
All and all I like the protector a lot. Even though it has a tendency to dent an damage easier then I would expect, I also will not abuse my tablet as much as my phone. I would buy it again, for the lifetime free replacements and price.
But in saying that for the same price and if they made them, bodyguardz and invisible shield are better, ie more durable, protectors.
I would give it an easy 8 out 10 points.
kickingandscreaming said:
I have one installed on my transformer. A few things about it.
1.) It does fit, makes sure to get the up part up. Look for the two holes for the camera. I screwed mine up and placed it on wrong, still works.
2.) The screen protector works very well with the dock, with out ripping or tearing. If you hold the tablet, you will see the edge of the screen is thinner then the area where the dock fully ends. This creates a impression in the screen protector where it is too snug. I have not notice any problems with it fitting in the dock, but it is snug enough to leave an impression.
3.) The quality of the shield is not up the same as bodyguardz or invisible shield. It has a tendency to dent and cut up pretty easy. Not insanely, but there is a difference between it and my phone, bodyguardz.
4.) The protector is very shiny and smooth. Which means you don't get the orange peel effect of the other protectors, but does not help viewing in sunlight.
5.) You need to makes sure you use ALL of the solution provided. It takes a lot more water and baby shampoo then the other protectors. Probably bigger screen and bigger protector, but I swear the sticky side is more sticky then the other protectors.
All and all I like the protector a lot. Even though it has a tendency to dent an damage easier then I would expect, I also will not abuse my tablet as much as my phone. I would buy it again, for the lifetime free replacements and price.
But in saying that for the same price and if they made them, bodyguardz and invisible shield are better, ie more durable, protectors.
I would give it an easy 8 out 10 points.
Click to expand...
Click to collapse
Well, the lifetime warrenty is a bit dubious since you have to return the old protector to prove that it was damaged through use and not through poor application. I think you also have to pay to shipping. It seems that it'll cost the same a buying a new protector. Plus if your screen did mess up, I'm not sure why I would want a replacement of the same item.
It's not as good as my phone's protector (forgot the company) but it's still decent. I definitely feel more at ease with the protector on.
I don't see how tearing through use (docking) wouldn't be covered.
strikethreeout said:
Well, the lifetime warrenty is a bit dubious since you have to return the old protector to prove that it was damaged through use and not through poor application.
Click to expand...
Click to collapse
actually, not true. i got some kind of film on my screen protector the first time i tried to install it. i took a picture of the protector and they sent me a new one in 3 days.
the funny thing is, my original order included BOTH a screen protector AND a carbon fiber skin. when i got my replacement in the mail there was a protector AND another skin! I think it was an oversight on their behalf. they just looked at my original order and replicated it.
so for the price of 1 screen protector and 1 skin i got 2 screen protectors (1 that i admittedly messed up) and 2 skins.
i should consider myself lucky (and skinomi a quality company).
tackyjan said:
actually, not true. i got some kind of film on my screen protector the first time i tried to install it. i took a picture of the protector and they sent me a new one in 3 days.
the funny thing is, my original order included BOTH a screen protector AND a carbon fiber skin. when i got my replacement in the mail there was a protector AND another skin! I think it was an oversight on their behalf. they just looked at my original order and replicated it.
so for the price of 1 screen protector and 1 skin i got 2 screen protectors (1 that i admittedly messed up) and 2 skins.
i should consider myself lucky (and skinomi a quality company).
Click to expand...
Click to collapse
Well, I guess that's good.
Did you still need to ship them back your old protector?
I guess they're more friendly in reality than their rules online. At any rate, I don't think I want to go through the hassle of reapplying it again anyway. (plus waiting for it to clear)
strikethreeout said:
Well, I guess that's good.
Did you still need to ship them back your old protector?
Click to expand...
Click to collapse
nope, i threw it away.
oh and another thing, all of our contact was via email. didn't even have to talk to a 'live' person.
I just received my Skinomi screen protector & didn't realized the installation was that involved. I guess I am just used to the screen protectors I have used with my PDA's & phones that just stuck to the screen on their own. Anyway I don't want to screw this up.
What is the purpose of the solution?
Is it an adhesive?
Does it aid in the installation in being to move the screen protect around to adjust its placement?
DISCLAIMER: TRY AT YOUR OWN RISK!
Supplies: Fresh screen film, a thin, soft cotton cloth, and adjustable temp iron, spay bottle, and preferably a infrared thermometer.
Video: http://sendvid.com/ez03e7q7
If you're anything like myself, then you've discovered a long time ago, that although unsightly, screen protectors do exactly what they are supposed to do.
Enter Google Pixel: A beautiful screen that's just begging for protection so that it may remain as such for years to come... But there's a major problem. The screen is curved!
After failures from tempered glass and a few different brands of film protectors, I ordered the iCarez film protectors. The technique they recommend works really well. Nailed it on the first try, no bubbles or fuzzies!
After a few minutes, I noticed the right side peeling up. Pressed and rubbed and did everything I could would not stick. Tried again with a fresh film. Same thing, although this is the closest I've gotten to perfection so far.
Here's where the disclaimer comes in.
I grab the iron and set it to "synthetic". I let it heat up for a minute and check the temperature with my infrared thermometer. It's at about *220 f. I place the phone on the cloth and fold cloth over screen. Just one layer. Lightly spray the cloth with water so it's just a little damp. Then I grab the iron and with slow, firm movements, press the edge of the screen where the bubbles are, making sure to not leave it in one place for too long.
I pull back the towel and wipe away the moisture on the screen to reveal it's working! I have 90% of the halo gone!
The last bit just wouldn't go down. So I turned the iron up to about *270 f and repeated the same motion. Boom! Flat, no bubbles or halo.
If you try this, please be careful. I'm sure exposure to high temperatures is only OK for very short periods of time.
**I will reiterate that this should be done at your own risk.**
DON'T BE A DUMMY. DO NOT PLACE A HOT IRON DIRECTLY ON YOUR PHONE.
Good luck!
You could at least post a video or picture of the results.
Boo this man.
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
Noted... BRB
Had a heck of a time finding a hosting site, so I just had uncle Google create a video. I hope it's adequate.
http://sendvid.com/ez03e7q7
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
I ordered the iCarez [HD Clear] Screen Protector for Google Pixel XL. I have had it on for 6 days and have had No issues at all. Very nice film screen protector. For years I have used, http://www.clarivue.com/browse-by-brand-screen-protector.html. Very solid ultra clear protector.
Thanks
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
twilk73 said:
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
Click to expand...
Click to collapse
I see where you're coming from. I treated this phone like a sleeping baby on a land mine for the first few days waiting for a case and screen protector to come in the mail. Even then I still got a few small superficial scratches on the screen and a pretty noticeable one the softer back glass. A properly installed screen protector is barely noticeable and I change it out every few months when it gets scratched up. Small price to pay for the added protection.
It boils down to preference. At any rate, if you do like them, it's hard to install one on this phone. This is a way to get it to fit better. It's been a few days now and it's holding strong. I'm pleased.
I've noticed after my screen protectors get crappy and I haven't had them on my phone for a while, my screen never really gets scratched up. Therefore, I don't really use screen protectors anymore.
The only thing that ever scratched my screen was a titanium keychain accessory on my keyring. Regular keys never scratched my screen, but the titanium sure did. Luckily it was on a horrible temp phone I was using until my pixel arrived
I quit using protectors. Don't like the way they feel. And they have come a long way in scratch proof glass
Bought a tempered glass one about 2 weeks after getting the phone. And I got it about a day or 2 after its initial release.
Havent had any issues with it at all. Can't remember the brand, I just know it's a full protector, covers the entire front of the phone.
I bought the Supershieldz tempered glass 2 pack off Amazon as I have had success in the past with their screen protectors. It covers JUST the usable portion of the screen, not the entire front, and it works just fine. Zero bubbles and no "halo".
I've just got the orzly pro protector, covers the entire front as well with perfect cutouts
Easy to install, just hinge it and flap it on lol
Sent from my Pixel using Tapatalk