Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?
Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath
The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.
If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.
I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT
shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!
I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"
1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.
Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!
I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn
Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull
I can't get my screenprotector removed...not even with tape
Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.
Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.
I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!
Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn
Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks
I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.
Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....
@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!
Related
how many of you guys are using screen protectors? im using one, but it keeps getting dirty every 2 weeks. im beginning to think if its even necessary to have one for my device.
It depends on what you mean by dirty. In a way you have answered your own question. If you didn't have a screen protector, your screen is potentially left open to abrasive scratches. My understanding is that once a screen is scratched, tough. It's much easier to replace a protector than a damaged screen.
I didn't realise how delicate screen protectors were when I applied the one that came with the MDA. I've just replaced my original thin protector with a Hightec one from durasec £7.95 from Ebay. They also do thinner ones for less. Like everything in life, you get what you pay for.
Bottom line is the standard motto. Prevention is better than cure.
I am using a Covertec one, and it is fine since a while (more then 2 month).
Boxwave
I'm very happy with the Boxwave clear protector.
I wouldnt go without my brando screen protector ... been using them since my P900 had no problems with dirt or scratches ..
Brando
I use Brando as well. It's the best.
I use 3M, is't 3M the best?
I'm using the brando ultra clear but the application was fudged up; for some reason there was already dust on the screen protector despite it still being seal :shock:. I peeled it off, start applying when I realized that it was leaving marks on the screen.
Washed it then reapplied and in the process, I managed to drop my cutter on it , blade first, and there's a small scratch on one corner.
Definitely going to have to have another go. With respect to clarity and responsiveness, I find it to be unresponsive if the application was poor but otherwise, suits me fine and nobody could tell it was applied except due to the fact that there's a scratch on it. Anyone got any tips? I washed with cool water and no detergents. Should I use any detergents?
what kinda protectors u guys use, i mean thin or hard. I had a belkin thin screen protector on my jam and it worked perfectly for more than a year, then i sodl the device and got the O2 XDA mini s, now i am looking for some decent screen protector.
what do u guys recommend, hard or thin?
This is probably heresy, but I have had my phone for 6 months and have never used a protector and there isn't one scratch. I travel about 80% a year for work to boot. But it usually travels in my pocket as opposed to a bag or something.
cool
i was waiting to hear that...6 months in your pocket and no scratch? thats pretty good..because i keep mine in my pocket all the time..if i ever throw it in a bag..i use the case it came with.
I just got a Martin Shields and love it. Took a little getting used to having to press a little harder, but it's great and I can't even tell it's on there.
by the way, how do I uninstall the old screen protector?
It has many scratchs over it and even more dust particles under it...
I'm using the BoxWave ClearTouch screen protector. I love it. I can barely tell it's on. I highly recommend it. It was kind of a pain to get on properly, but what screen protector isn't.
This may seem like a stupid question but: The screen is made out of plastic, not glass, right? How easily does it scratch? How does it do in a pocket without a case?
Thanks
Put it this way; I'm very careful what I put in my pocket with the phone, definitely no keys, coins or lighters. I took off the sony screen protector because it doesn't even cover the whole screen, and you'd need to cut off the tab on one corner if you were to use it permenantely.
I have a very basic carphone warehouse "cut to fit" protector on mine now, the protector itself isn't particularly scratch resistant (that is to say it's sh!t) but at least the screen doesn't take a beating.
One thing I do kindof like is that I've cut the protector down to such a size that it pops just under and between the bevel and the screen. It was bloody difficult to get the thing in there properly and without any dust, but worth it imo for the final result.
always use a screen protector, that way you don't need to bother having care of the screen.
once the protector is scratched, remove and put a new one.
I used the stock one 5-6 days ti'll the Martin Fields I ordered came to my house.
Also I bought a Waterfield suede jacket that fits perfectily the xperia and is really thin, but protects from scratches the x1 itself.
Thank you for the replies! I should order these along with my phone?
http://www.sfbags.com/products/cellphonecases/cellphonecases.htm
http://www.martinfields.com/US/productdec.asp?pid=4181&modeln=&model=
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
I haven't ever used one, I find they make the screen less responsive. I do have a few scratches on my screen though but they are invisible when the screen is backlit...
GoldCoin said:
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
Click to expand...
Click to collapse
Your screen protector is a must as scratches can appear on your screen very easily without it.
As for the bubbles I've managed to get mine on with only a couple of bubbles around the speaker & 3G camera. Doesn't bother me to much any more
Try this thread as it has a number of recommendations on which is the best screen protector to use
Yes, the screen protector is a must!
Especially for a device with such a huge display. I have read here about cracked displays and I am sure that screen protectors give added resistance against cracking (besides their primary function against scratches).
It takes PATIENCE to apply one though. I wasted 2 before i managed to put one flawlessly (well almost)
Some of the protectors can be washed and re-applied.
Do you really think it has some impact on the way the screen respond ? Does the screen protector makes the bends more noticeable when you press on the center of the screen ?
I've used my Universal for over 3 years with no scrren protector, and there is a mark in the top right where the X icon is but no other issues. However the Universal is a clam shell design so the scrren is protected when it's in my pocket. I don't think I'd want to use the HD without one.
I couldn't fit the screen protector that came with the HD properly because it has to be done with microscopic precision. However I bought 6 protecoter for £3 on Ebay from Ecell and am very happy. They're much easier to fit because they're a fraction smaller, plus you can use a couple to practice with and still have spares left over.
I use the protector from day one and I can't imagine not using it. It's just too much of a risk, and by watching my used protectors, how they're covered with scratches, some of them quite big and quite deep. I would not want to have this permanently on my screen.
I have bought some additional protectors as well. I predict I will be changing protectors every 3 or 4 months.
I have no idea why everyone seems to have so much problems with applying them. It was very easy for me to apply both the stock protector and the Brando protector. Just clean the front screen as thoroughly as possible with a piece of cloth that does not leave those small fabric hairs. I used a cleaning cloth for glasses, and put a few drops of window cleaning fluid as well to remove eventual grease.
After that it was piece of cake. Started at the top and just rolled down the protector in one smooth move. Had 1 bubble, which I simply pushed to the edge of protector until it was gone.
I reccomend you do all of this in a dust-free environment. Bathroom is a good place, for example. Let the dust settle for like 20 minutes before going in. Avoid rooms which have carpets and such stuff.
I used mine for the first month+ without the screen protector and sustained no scratches. I have one on now simply because one day I was putting stuff away, saw the screen protector, put it to my HD and it went on perfectly without trying, so I decided to keep it on.
GoldCoin said:
How.....unnoticeable?
Click to expand...
Click to collapse
GoldCoin,
Have you tried buying on from a phone shop and asking them to install?
I installed mine as soon as I removed the "do not sit down with the HD in your pocket warning" Best way to ensure that the screen is clean. Took a couple of attemps to get it started but a little effort and I got it. Left with a small bubble round the ear piece and one top right, but that looks like a slight defect in the protector as the alignment looks almost perfect.
When installing, I peeled back a portion of the protector and aligned it best I could - incidentally, I placed the HD back in the foam that it came in to hold it firm. Without peeling any more off I try to gauge the alignment. If I think is good to go, I slowly peel the backing whilst rubbing my finger back and forth across the area just stuck down.
Here's another suggestion. PSP Screen Protector installation
Good Luck,
Yes, it's a must!
I use a screenprotector and it has lot's of scratches on it, which otherwise would be on the screen itself
Absolutely!
I Use clear-coat and are very satisfied (had it on my diamond as well and have it on my psp)
Once you get a mark on the display u will regret going without.
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Bubbles are not problem. After installing screen protector just take you credit card. You can remove all bubbles with credit card.
Just adding my two pennies worth. I haven't ever used a screen protector on any of my previous phones. However Touch HD is a little bit special (as we know) so I invested. The one that came with was utter....well it was naff. I bought an invisible shield but some areas didn't dry and adhese correctly....so I opted for Exim...now this was awesome....a few attempts later and I have it installed with no bubbles at all using a credit card to apply.
(Top Tip: use selotape to remove any unwanted dirt from the screen before installing....the static tends to draw dust to it straight out of the packet....helped me anyway!)
GoldCoin said:
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Click to expand...
Click to collapse
For what it's worth, it wouldn't hurt to use a can of dust remover or compressed air to spray the area before applying. Worked for me. Just a thought.
Does the normal screen protector that comes in the box makes the screen feels like bending when u press on it ? in the center specifically ? and makes you need to press harder when u tap ?
Invisible shield on mine and wouldn't be without a screen protector on any of my devices with my way of using them and pocketing them they tend to get scratched but loving the invisible shield. Should be installed at the factory imo
Jezwick said:
... I find they make the screen less responsive....
Click to expand...
Click to collapse
I've always used one, XDA mini, Kaiser and now the THD.
In all cases I've found the sensitivity is affected but to varying degrees.
In each case I've used tweaking tools to change the sensitivity back to acceptable levels.
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Xeon said:
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Click to expand...
Click to collapse
I haven't experienced this with the Exim protector I am using. In fact...it's as though there is nothing there....even when swiping!
There are some cheap screen protectors out there, which are made of too soft plastic so that they'll get scratches easily which doesn't look really good.
So, can you tell me your experience with your screen protectors on your HD2 - do you have allready small scratches in it or is it fully scratch resistant?
I don't use one with the HD2, but the best I ever used on formal phones was EXiM Spuc. They feel a little harder then other screen protectors and I used one on a SE P1 for about 6 months with the pointy stylus and I sold the phone with the protector still on, I even had to tell the new owner there was one on there..
I have a new brando screen protector for HD2 but haven't used it yet. I use the PO S511 case from htc, so most of the time its closed..
Usually the anti-glare ones (check the HD2 accessories forum..i got it from somewhere in there) are a bit more scratch resistant. They feel a bit "thicker" than the clear ones...though I'm sure they're about the same thickness.
I use the FX-Clear (Folix) bought at amazon.de - it´s great stuff
i dont have any protector and no scratches. Its glass... there is even a video with ppl trying to hurt it with a knife and it's still fine after... Waste of money imo. Also might impair functionality and looks.
Rather than get the screen scratched, as has happened to a few people on here (keys & change in the pocket with the phone!!!), I got some of these...
http://www.protectionfilms24.com/article/vikuiti-dqc-160-screen-protector-htc-hd2-28087.html
They're quite thick, but don't hinder screen sensitivity (I'd estimate the reduction in sensitivity around 5% - it's that minor). You can also wash them and reapply them (if you can get it off!)
I'm terrible at applying screen protectors. I always get stuff underneath them and end up going through a whole pack and not getting one perfect. With these things, however, the fact that I could just remove it and wash it was a godsend! It's easy enough to remove if you've only just put it on, and I've now got one that's on there that you can't see. It's perfect!
I couldn't recommend them enough mate. 3 for 2 at the minute as well, so well worth it.
Why would anyone want a screen protector for the HD2 when its glass and scratch proof??? wierd confused:
www.youtube.com/watch?v=NcEaehKWr2s
Acoustica76 said:
Why would anyone want a screen protector for the HD2 when its glass and scratch proof??? wierd confused:
www.youtube.com/watch?v=NcEaehKWr2s
Click to expand...
Click to collapse
Because it's not scratch proof - it can get scratched...
http://forum.xda-developers.com/showthread.php?t=589425
definitely InvisibleSHIELD!
you pay premium quality, but you really get scratchproof device. you can scratch the foil with keys and you won't find any marks. using these foils on my iPods for 4 years and they still look like brand new! you can choose between screen only, or a full body cover.
also, the foil has a lifetime warranty!
http://www.zagg.com/
shouldn't this thread be in Leo accessories?
I grabbed this stuff: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370310732216
before the minor scratch I'd already made was joined by any more...
they can be a real pain to get properly aligned but they easily remove,if required, and can be stuck back on again just as easily..it's just like applying transfers to airfix models when you were a kid.
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!