any one with recommendation on screen protector
I'm currently using a Zagg max coverage protector that I had installed at Best Buy, and have no complaints so far. The only thing I've noticed with it is that my finger tends to get stuck when using Swype, but not often enough for it to bother me.
I don't have this phone but I don't think you need a screen protector. I haven't seen any videos on the screen durability test like they do for the iphone scratch test. But I think the screen should be sturdy enough. The screen won't be as smooth to scroll with a plastic layer. And if you accidentally get even a drop of water in the corners of the phone with the squeegee, you are screwed. Good luck.
Using an Invisible Shield on mine. This is the only phone I've ever used one on. I figured with a screen this huge I want to keep it looking nice.
You don't need you it is glass like the Iphone and hero. I have seen test's on both using key to try and scratch nothing happened. Anything that would damage the screen (scratch it) would go right through the screen protector and still damage it. As it would take a lot of force to scratch. Just a wast of money not to mention it hampers the touch screens ability to pick up your finger.
someone apparently water damaged their evo with putting on a protector. Careful. I would cover up the indicator on mine once I get it.
i have a zagg on mine and hate it. its sticky and has a "orange peel" like appearence. i ordered a hard plastic one on amazon and am waiting for it to come in the mail.
I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.
Zaag one here and I think it's too sticky. It messes with my swiping. Catches my finger too much.
chazglenn3 said:
I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.
Click to expand...
Click to collapse
I used the same logic with my hero and ended up getting a few scratches just from unforseen sh!t happening. this screen is too beautiful for me to risk.
also whoever water damaged their phone while putting on a screen protector is an idiot.
I put one on for peace of mind and it works just as it did without the protector.
However, if it's like the iPhone screen, then you shouldn't need one at all. I had the same iPhone since the release date and had zero scratches as of Friday... it's last day in service!
We pre-ordered out Evo's at RS so we used out accessory credits for Zaggs and car chargers and I put them on. They do have an orange peel like look when looking at them at a angle with the screen off and reflecting off some light. But with the screen on and looking at them there is no issue with the display. They were not hard to put on either.
I'm using the "anti-glare" protector that comes in the 3-pack you get at the Sprint store for $12 (the other two are "clear"). I love it - it doesn't interfere with my user experience at all. Why on earth would you risk scratching your screen? To save $4 and 5 mins time?
Boxwave Crystal Clear screen protectors. I have a 3-pack on order (I have 2 Evo's between me and my girlfriend). We're using them "naked" so far until they arrive.
I highly recomend the Boxwave protector though, I have used them for about 6+ years on various PDA/Smartphones. I even have one for my P&S Camera.
Here is my experience:
Zagg:
Good -
Works well as protection
Hides fringer prints decently
Bad -
Blurs your screen a very small amount
Makes the surface feel like rubber
Hard to put on without getting a little dust under it
Generic hard plastic sheet:
Good -
Works well as protection
Feels very smooth, smoother than glass
Easy to put on, and normally you get 2 or 3 in case you make a mistake
Perfectly clear
Bad -
Finger print magnet, oil really builds up
You can see where the protector ends around the edges
Added glare in sunlight(small amount)
Unprotected Glass:
Good -
Feels very smooth
Easy to clean off, just rub it off on your shirt
Perfectly clear
Bad -
Medium finger print problem, but easy to clean
I feel scared to place it face down, once I get a case that recesses the face I will feel better.
Over all I decided to go with unprotected. Its the middle of the road and I feel the best over all experience.
Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.
zone23 said:
Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.
Click to expand...
Click to collapse
Agreed, the Zagg is sticky. But I deal with it so that I can protect it. I don't have a huge issue with viewing it or the orange peel look when it's off because you don't notice it when it's on. The fit is nice. On my hero, I had a really clear smooth one from ebay which was great, but was all scratched up. The zagg shouldn't even mark up which is why i'm dealing with it. Sticky, but not to the point that it pisses me off. I put it on myself relatively easily, just spray lots of that solution on it, no bubbles, no dust, 2 minute application.
Maybe the Zagg is sticky if you put it on backwards but I have ZERO complaints about mine.
I ordered a 3 pack of anti-glare/anti-fingerprint screen covers from handhelditems for 7.99 (for the 3pack). They have crazy deals on evo 4g accessories right now. I also got a car charger for like 3.99.
I bought it more for the anti-glare/anti-fingerprints than the actual screen protection.
Warning!
There is a whole thread started on water damage and most of this comes from any screen protector that requires you to spray on water... ei Zaggs
When you squeegiie the water off the screen it leaks in to the back of the phone and Sprint has been sneaky about placing water damage indicator right on the tip of the phone.. below battery.
Either cover the indicator with protector or stick to the regular screen covers..
Related
Having recently bought my son a Nintendo DS, I noted that in the accessory pack I got with it, it came with 2 screen protectors that are semi-rigid. They're quite a bit thicker than one that shipped with my phone, and don't flex and bend like thin paper. They also don't seem to affect sensitivity of the touch screen in any way, as well as being perfectly sized to the screens and were invisible once fitted.
Are there similar protectors for the TyTn 2? I'd love such a protector as it'd be FAR easier to fit, and provide much better protection to the screen.
Rigid Screen Protectors
I have come across these. The ones I tried were made by "Martin Fields" product number MFOP-HTCTyTN-T
A right bloody bastard to fit as they are very slighty oversized. Perhaps this is done purposly so the protector fits into the gap around the edges of the screen?
Very clear and reasonably priced compared to the OEM product. They do work extremely well (once fitted).
Rgs,
J
Thanks. I'll check em out.
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
I just checked my little brother's DS box, hoping to find the screen protector but nothing there but manuals =(
Any reference on how firm and rigid the MField or InvS are?
Well, from the video, the invisibleShield isn't the slightest bit rigid, though if it lives up to its claims, that wouldn't matter. I ordered a Martin Fields one earlier so I'll see how good that is.
It's not just the rigidity for protection though. A rigid protector will be a LOT easier to fit...
Beleave me, MF is rigid. And yes, it is easy to install but remember to clean the surface of the screen. This part is very important. If you do it right, it will install in less than 30 seconds and you will struggle to see the difference between no protector and MF.
Oh I know that. I'll be cleaning it very carefully and making sure there's no dust about when I fit it! Don't want dust under the thing!
Just wish it'd hurry up and arrive!
boxwave
The boxwave protectors are much thicker than average ones, are washable, and work great. They are about as thick as the psp protectors, e.g. more like a hard plastic sheet, I'm not sure what the ds ones are like.
http://www.boxwave.com/products/cle...crystal-screen-protector-htc-tytn-ii_2905.htm
tke371 said:
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
Click to expand...
Click to collapse
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Semi- related: how are you guys cleaning your phone screens?
Oh, and +1 for Martin Fields.
My phone broke, but I had insurance on it (not from phone company but through homeowner's via a personal property rider), and mycellularrepair.com was able to replace the LCD for $200. Also, never buy that phone company insurance. Personal property rider is the way to go. It was just pennies a year for ~$500 of coverage for the phone. NO DEDUCTIBLE! So I paid nothing to have my phone fixed.
Get a NEW ONE - They're Cheap
jon_k said:
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Click to expand...
Click to collapse
Interesting - Are you really that concerned about a product which is relatively cheap compared to the amount of time use you get out of it? Forget washing it off. Just put another one on - a CLEAN NEW one. If they last a long time (like in most cases a year or more), who cares that you have to spend around $20 to get a replacement. If they stopped making them altogether or they cost a ridiculous amount of money (for plastic, ridiculous. For peace of mind, priceless), then yeah, I would wash and rewash the screen to save money.
And the idea is NOT to squeegee the WATER bubbles out to the sides. They will evaporate on their own given some time. The idea IS to squeegee the AIR bubbles out to the sides and also to take extra great care when doing this procedure. You wash it off so that it restores some of the tackiness on the film. You can get most of the water off by blowing or using a can of compressed air, THEN put it on. You shouldn't have that much water under your film if you take care when doing it.
I am sorry about your tilt. That really sucks. If I were you, I would just put a BRAND NEW one on next time and forget about washing it off.
~Gwen
I need one of these too, recently the digitizer for the touch screen on my phone cracked. They are charging me 50$ for the screen and 40$ for labor. My question would be, would this rigid screen have prevented my digitizer from breaking? If it would then id buy it in a second.
I'm giving a +1 to the Martin Fields as well.
I just got a couple of them for my phone. They're definitely more rigid than some of the others, but I put it on a clean screen & can barely tell I have one on.
Stylus slides smoothly across it, no visible scratching at all (unlike the OEM one that marked easily), & it's also pretty smooth for finger usage too.
Had to wait a week for them to ship via expansys-usa, but worth the wait.
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!
Sad day in the life of SlightlyAmused. Put the phone in my coat pocket and it happened. One good size scratch down the edge, now it don't bug me too much but I figure it would be best to get a zagg on this bad boy asap. The problem is I cannot find any online!
Does anyone know where I can find some?
Also, for those who use them, will zaggs make my screen feel "draggy" or does it still feel natural?
Did you scratch the screen or the phone plastics? The screen's supposed to be scratch proof.
The screen. I have read that if there is sand between a credit card or something it can happen. I think its just resistant and not proof.
I had a Zagg on my N900 and it did feel a little rubbery/draggy. Either you get used to it or it wears off, not sure which but the feeling goes away.
I really want to find a screen protecter that is exactly like the ones supplied with the HTC Hermes and Kaiser in the box. Best screen protectors i ever had. Barely even noticed they were there and they lasted the time i had the phones.
I found a review on Steinheil protectors and they look good. Sadly they don't have any for Defy. Oh well, maybe next month.
Just be careful around sand and hard surfaces. I have read alot online so far that people have scratched the glass on other devices with gorilla with only sand in their pocket or on the beach face down. Everything else doesn't seem to effect it.
Hi,
for my Defy, i ordered Vikuiti (TM) DQC-160 3M
I hope it works well
DING!
Looks great and the reviews are all pretty good. The whole finger print thing dosnt really bother me as I usually wipe it off after I use it, or during it (hard to play casino kid 2 with finger prints imo).
Hopefully it covers a little of the scratch I have on the screen
Thanks!
and you believed them?
rafeee2 said:
Did you scratch the screen or the phone plastics? The screen's supposed to be scratch proof.
Click to expand...
Click to collapse
hmmm, those that believe that Corning Gorilla Glass is scratch proof are gullible, and mislead by Motorolas claim that the Defy is dust scratch and water therefore life proof, I have a Samsung Preston here that begs to differ thanks to the dirty big diagonal scratch down it's face
and I also have a still camera that Olympus swears to be "waterproof" despite the angry protests of almost everyone else who bought one which just goes to show you can never believe what a company says about their product
if you're wise you would fit a screen protector to it the very moment you unbox it like I did with my Sex1
and will do with my new Defy When I get it
(decision made!)
I wish realook made them for the defy. They are by far my favorite
Sent from my DEFY using XDA app
imo phone never feels as responsive with a screen protector on - I have always used them when I had non touch screen phones, and when I got my Hero I tried a number of different ones and always felt they weren't working very well, when I just decided to start using it without one, it felt like a different phone. I haven't bothered with the Defy, not because of the scratch proof claims. I think the best defence is just to get in the habit of putting it in an empty pocket etc.
I feel the same about them until I put a realook protector on my vibrant. It's pretty awesome.
Sent from my DEFY using XDA app
One I found in my search for protectors was skinomi have it ordered but still waiting.
Why not put your phone in an empty pocket? Hell, I did that with my dumbphones before touchscreen was a readily available feature.
Plus, isn't putting a screen protector on Gorilla Glass like putting tissue paper over kevlar?
for what little protection
where work is always better ... and is not an office
if you happen to a simple scratch , throw away the tissue paper
I am so used to just tossing it in my pocket that I dont really think about whats in there. When I rocked my BB9700 I would always throw it in the holster and I think I will be looking around tomorrow for either a generic screen protector or case for the phone.
I must admit the phone can take a beating.
I got a couple of decent sized scratches from a lighter in my pocket within 3 days (the perils of smoking!).
I just received my skinomi a couple of days ago and am most impressed so far. Using the wet one, I have no bubbles and cannot see the scratches now. It feels smooth on the finger, shows less finger prints and I have lost no accuracy. I will be interested to see how well the self healing thing works, as every other cover I have used ends up covered in scratches within a week.
I will post how it holds up over time
superfastmonkey said:
I got a couple of decent sized scratches from a lighter in my pocket within 3 days (the perils of smoking!).
Click to expand...
Click to collapse
I can understand that. My new years resolution is to quit smoking.....year 15 of failed new years. I'm starting to think this whole "sticking to it" isnt for me.
I've had the skinomi on for a few weeks now. It is the most impressive protector I have ever seen.
I can't see the original scratch, nor can I see fingerprints much. I can see better in light and it feels better than the gorilla glass- smooth but rubbery with no grab. It is as responsive as stock and has no dulling effect on the screen.
I do have some scratches-more like pits from having it in my pocket with keys and a lighter and other stuff while climbing around at work. I realized I had my full bodyweight on it and I feared I would crack the glass, and it's hard to describe how I knew I had given it way beyond normal abuse, and I have cracked a screen before with half the pressure- these pits haven't gone away so I ordered another one without hesitation even though I can only notice them on angles, and even then not much (I could have gone for the lifetime warranty replacement but I feel I really pushed it beyond its purpose, and it's too much hassle -with the GET25 discount it's only $8 anyway, and I was getting one for my wife's Desire that I gave her when I got the Defy). If I had my Desire in my pocket that day, I would guarantee it would have cracked.
I can see no other scratches, and one's I have had just fade away in days, as it is self healing.
Does anyone know if there is any good "anti-finger print" screen protector?
The finger print just drive me nuts...
The anti-glare one from PDAir works a hoot!
no clue said:
Does anyone know if there is any good "anti-finger print" screen protector?
The finger print just drive me nuts...
Click to expand...
Click to collapse
as topic
hi guys, kindly recommend a i9023 full body screen protector.
I've been looking tru ebay, amazon. but not yet to find a satisfied ones
I love my Bestskinsever skin. $10 for full body. You have to make the solution yourself though.
Sent from my Nexus S using XDA Premium App
I got myself an InvisibleShield from Zagg. It's not easy to install.. the back side of my phone got some bubbles stuck in there. The front side was better though. However sliding your fingers across feels weird... there's always some rubberized layer that you can feel and creates traction sometimes. Then it gets a bit sticky and if you leave your phone on a glass surface for example, when you pick it up you can feel that it's unsticking from the table. And then you've got an orange peel effect on the screen. Moreover the shield collects finger prints and dust around the key holes but hey... at least you've got peace of mind about your screen not getting scratched. I for one, can live with the above mentioned issues besides at night it looks great... only by day you can see better the imperfections but still you don't have problems with the screen being reflective by day.. you can see well what's going on.
I always get zagg and let best buy put it on. I've tried many times. I've tried doing it the way they do but it still looks like **** when I'm done. They do a much better job than I ever would. I let a sprint employee put one of theirs on once. They did a ****ty job on it. I tried doing that myself at home, taking a long time to try and cut the plastic to be the exact size as the screen. I failed miserably when putting it on and getting all the air pockets out. Get a zagg at best buy and pay them to put it on. Don't mess with the screen or put a case on it for at least a couple hours. Overnight is better. I didn't do that once and every time I put the phone in my pocket, the heat would make the zagg slide on the screen. After that I give it a few hours to dry and set. No problems now. That's why they they say to not roll down your windows for 24 to 48 hours after you get tint put on a car. The liquid needs to dry and the adhesive needs to set properly.
I'd have to recommend the ZAGG as well. I always buy from ZAGG.com that way if anything goes wrong the warranty/replacement is easy, plus it's usually cheaper. There's also a technique called palming with helps a lot with getting the corners to stick, they even have a video on it.
I use Steinheil Ultra Optics. I love the matte feel to the screen and it reduces glare. Also it doesn't yellow!
Hey i bought Steinheil Ultra Optics and kind of disappointed with it. It's not fitting into my i9023.....
Pros
- no finger print.
- good feel on sliding e screen with my finger
cons
- no warranty
- doesnt fit. protector too small!
- too expensive for a ****ty protector w/o warranty.
I will not recommend Steinheil Ultra Optics!
Who has a satisfied screen/full body protector for i9023 plz recommend..haha
I bought ghost armor ones for my nexus s and the wifes iphone 4. Followed the directions and did the iphone first. It looked like ****. Took it off and decided not to do my nexus. Will probably return them, and just be careful with the phone.
DISCLAIMER: TRY AT YOUR OWN RISK!
Supplies: Fresh screen film, a thin, soft cotton cloth, and adjustable temp iron, spay bottle, and preferably a infrared thermometer.
Video: http://sendvid.com/ez03e7q7
If you're anything like myself, then you've discovered a long time ago, that although unsightly, screen protectors do exactly what they are supposed to do.
Enter Google Pixel: A beautiful screen that's just begging for protection so that it may remain as such for years to come... But there's a major problem. The screen is curved!
After failures from tempered glass and a few different brands of film protectors, I ordered the iCarez film protectors. The technique they recommend works really well. Nailed it on the first try, no bubbles or fuzzies!
After a few minutes, I noticed the right side peeling up. Pressed and rubbed and did everything I could would not stick. Tried again with a fresh film. Same thing, although this is the closest I've gotten to perfection so far.
Here's where the disclaimer comes in.
I grab the iron and set it to "synthetic". I let it heat up for a minute and check the temperature with my infrared thermometer. It's at about *220 f. I place the phone on the cloth and fold cloth over screen. Just one layer. Lightly spray the cloth with water so it's just a little damp. Then I grab the iron and with slow, firm movements, press the edge of the screen where the bubbles are, making sure to not leave it in one place for too long.
I pull back the towel and wipe away the moisture on the screen to reveal it's working! I have 90% of the halo gone!
The last bit just wouldn't go down. So I turned the iron up to about *270 f and repeated the same motion. Boom! Flat, no bubbles or halo.
If you try this, please be careful. I'm sure exposure to high temperatures is only OK for very short periods of time.
**I will reiterate that this should be done at your own risk.**
DON'T BE A DUMMY. DO NOT PLACE A HOT IRON DIRECTLY ON YOUR PHONE.
Good luck!
You could at least post a video or picture of the results.
Boo this man.
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
Noted... BRB
Had a heck of a time finding a hosting site, so I just had uncle Google create a video. I hope it's adequate.
http://sendvid.com/ez03e7q7
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
I ordered the iCarez [HD Clear] Screen Protector for Google Pixel XL. I have had it on for 6 days and have had No issues at all. Very nice film screen protector. For years I have used, http://www.clarivue.com/browse-by-brand-screen-protector.html. Very solid ultra clear protector.
Thanks
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
twilk73 said:
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
Click to expand...
Click to collapse
I see where you're coming from. I treated this phone like a sleeping baby on a land mine for the first few days waiting for a case and screen protector to come in the mail. Even then I still got a few small superficial scratches on the screen and a pretty noticeable one the softer back glass. A properly installed screen protector is barely noticeable and I change it out every few months when it gets scratched up. Small price to pay for the added protection.
It boils down to preference. At any rate, if you do like them, it's hard to install one on this phone. This is a way to get it to fit better. It's been a few days now and it's holding strong. I'm pleased.
I've noticed after my screen protectors get crappy and I haven't had them on my phone for a while, my screen never really gets scratched up. Therefore, I don't really use screen protectors anymore.
The only thing that ever scratched my screen was a titanium keychain accessory on my keyring. Regular keys never scratched my screen, but the titanium sure did. Luckily it was on a horrible temp phone I was using until my pixel arrived
I quit using protectors. Don't like the way they feel. And they have come a long way in scratch proof glass
Bought a tempered glass one about 2 weeks after getting the phone. And I got it about a day or 2 after its initial release.
Havent had any issues with it at all. Can't remember the brand, I just know it's a full protector, covers the entire front of the phone.
I bought the Supershieldz tempered glass 2 pack off Amazon as I have had success in the past with their screen protectors. It covers JUST the usable portion of the screen, not the entire front, and it works just fine. Zero bubbles and no "halo".
I've just got the orzly pro protector, covers the entire front as well with perfect cutouts
Easy to install, just hinge it and flap it on lol
Sent from my Pixel using Tapatalk