Database Users

upgrading with activesync

hi all ..first you are wonderful for creating this site
thanks for all information
My device is HTC made xda 1 which in Turkey sold by escort computer and they build their cooked rom 3.20.03 eng and radio version 3.25.00 900/1800 freq.
Other than rom ver. it is equal of qtek 1010 .
I want to upgrade rom to win2003 .. when I begin the upgrade by activesync my device automatically soft reset itself and on my pc activesync 3.7 ver. shut itself.
I ve tried 3 times but nothing changed . Can you help me please.

Try it with a lower version of ActiveSync. Like V3.5 or V3.6
Regards
Mark

If your current radio stack works ok I would suggest leaving it alone, if your connection to activesync is likely to fail I suggest you use sd card flashing, much more reliable. If you are upgrading radio stack over activesync and the connection fails, you may end up with a pda but no phone. :shock:

I have tired with activesync 3.5 but also my device soft restarts and connection broken.
How do I use wm2003 by my 128 mb sandik SD card. and install the wm2003 to it with bootloader.??
Please make me understand in detail....

Search the forum for "sd flash rom"
For example the following link: http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=sd+rom+flash
Regards,
Mark

ActiveSync "synchronization error"

Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre

just reinstall activesync that worked with me

You might get an error if the boxes are checked for synching contacts/appointments etc and you dont have Outlook installed on the pc. Try unchecking all the boxes and see if the error disappears.

pierrevw said:
Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre
Click to expand...
Click to collapse
use the activesync ver3.8

HELP!! Bluetooth Active Sync for Mini XDA

I cant sync with bluetooth. Please help

make sure you have the latest rom since this seems to be most stable when doing AS over BT.
On Desktop
1) make sure bt dongle is inserted and all software have been properly installed
2) open Activesync click File>Connection Settings... check Allow serial or infrared connection to this COM port:
3) Indicate your BT COM PORT check your BT software or documentation mine uses COM5, this maybe diff on your desktop.
On PPC
1) Tap Start>Settings>System>Bluetooth Setting
2) Under Bluetooth ActiveSync Setup: tap Start you will be taken to the Bluetooth screen. Make sure both boxes are checked.
3) Under Devices Tab. Tap New your ppc will now search for your desktop.
4) type your passkey and wait for the Desktop to prompt you for a password. Type this password on the desktop to finish bonding.
5) open ActiveSync tap Tools>Connect via Bluetooth and you're done.

I did this but I can't connect still.
Here is my rom:
ROM version: 1.03.00 WWE
ROM date: 11/01/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.166 WWE

your ROM looks old. isn't there a new ROM for O2mini? I suggest you get the latest ROM. anyway with your current ROM it can still be done but it is a bit tri ckier. You can read a step by step how to here http://www.howardforums.com/showthread.php?s=&threadid=544932

sorry for the ignorance. I went to the O2 site and there are no new rom for the mini.
Can you please tell where to get it?

Sorry I didn't know that just assumed O2 had released it since i-mate and qtek have released theirs. I use the i-mate JAM w/ Qtek 1.11WWE ROM. Anyway you can wait for O2's official ROM also or follow the link to HoFo that did the trick before my ROM updates.

Error "Version of ActiveSync not compatible with the co

Version of ActiveSync not compatible with the connected mobile Device
This is the error I receive no matter what I have read to do or not do to my Desktop PC.
These are the setting in the Device:
New I-Mate Jasjar with
ROM Version: 1.12.38 WWE
ROM Date 8/24/05
Radio Version: 1.03.00
Protocol Version: 42.36.P8
ExtRom Version: 1.12.120 WWE
I realize that there is a new Rom Update but I can't sync with my Desktop to get the file? 62 MB by the way.
These are the actions I took to try and rid this error message.
Cleared Temp folder (%temp%) in all user accounts.
In the registry deleted HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services key
Deleted HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
Uninstalled Microsoft Activesync from Add/Remove Programs
Deleted Activesync folder from Programs Files
Restarted the computer
Installed Microsoft Activesync 4.0 many times and 4.1.0 Build 4807 many times all the while deleting the other before the new install.
This is what happens after a new install.
The device is seen by my Computer running Windows XP SP2 and loads the device- At this point everything looks good.
ActiveSync start and actually connects to the device but only as a GUEST not as the device name that I imputed in the JASJAR.
NEXT the Error occurs “This Version of Microsoft ActiveSync is not compatible with the connected mobile device. Please upgrade to the latest Version of Microsoft ActiveSync and reconnect."
If I click on the OK button underneath the error. The device connects but I cannot explore the contents or sync to the device whatsoever.
Could anyone aid in getting this problem resolved. I have spent over 10 hours trying to figure this out looking at all other forums but no one seams to have a resolution.
This Link seam to have had the issue happen with eairlier version of ActiveSync but I have followed each step but still no resolution.
http://www.pocketpcfaq.com/faqs/act.../syncerrors.htm

Update to Above
I just went out and purchased a new computer and installed Activesync 4.1 and outlook 2003 Xp on the XP Pro machine. When I went to connect the USB cable it found a new Pocket PC device but didn't list that it found the JASJAR. Then activesync started and it happened again.
This Version of Microsoft ActiveSync is not compatible with the connected mobile device. Please upgrade to the latest Version of Microsoft ActiveSync and reconnect."
When I click on OK I get connected as a Guest account only but can't see any items on the Pocket PC.

I had the same problem...
It's a compatibility issue with Antivirus.
Uninstalled the antivirus and the device got recognized

Activesync: No connection possible

Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115

There is a Win Mobile 5 patch that improves Activesync over USB, see attached. While I cannot solve your problem in the first place, at least this patch enables you to leave your firewall on during Activesync once you get it working. As per the instructions attached, copy to device, install CAB file, soft reset, start Patch and switch to "Serial Mode" (one of two options).
Funny thing was, I just installed the CAB file, and never switched to Serial. Just left it as it installed, and bingo - Activesync was working now with the firewall staying up.
If 4.1 Activesync is not working, Microsoft recommends to switch back to 3.8
Good luck

helsana22 said:
Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115
Click to expand...
Click to collapse
Hi helsana22,
I'm afraid I can't help but I was wondering if the German S200 ext ROM has a CAB with the German T-Mobile Settings?

helsana22 said:
Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115
Click to expand...
Click to collapse
I don't think should be a big problem. Maybe have some mess with your drivers, i suggest to deinstall your actual activesync and reinstall it again, actually should work.
I can just post about my experience, i have s200 and i have the old active sync and works fine.

@decmac
Hello Decmac,
I bought the S200 here in Switzerland, so I don't have a T-Mobile image.
rgds

@raskal
I already have de-installed and re-installed the two different versions with the 2 different languages. No luck.
I will now use the sledge hammer and make some test with an "older" Ghost Image on my laptop.
I had the Nokia SW installed for my previous mobile. That SW can't get deinstalled in a decent way, so I assume, that maybe Nokia and QTEK don't really want to cooperate.
thanks for your feedback.
rgds

no connection? mmm Hard Reset?
Hi Guys,
I experienced the same problems as you tell in your message.
The only way was uninstalling Activesync and making Hard Reset to my S200. :?
Later, everything was ok, at least at this moment...