Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115
There is a Win Mobile 5 patch that improves Activesync over USB, see attached. While I cannot solve your problem in the first place, at least this patch enables you to leave your firewall on during Activesync once you get it working. As per the instructions attached, copy to device, install CAB file, soft reset, start Patch and switch to "Serial Mode" (one of two options).
Funny thing was, I just installed the CAB file, and never switched to Serial. Just left it as it installed, and bingo - Activesync was working now with the firewall staying up.
If 4.1 Activesync is not working, Microsoft recommends to switch back to 3.8
Good luck
helsana22 said:
Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115
Click to expand...
Click to collapse
Hi helsana22,
I'm afraid I can't help but I was wondering if the German S200 ext ROM has a CAB with the German T-Mobile Settings?
helsana22 said:
Hi there,
I just bought a QTEK S200 but can't make any Activesync connection.
QTEK S200 is in German, Laptop XP, SP2 English.
I first tried QTEK Activesync 4.1 CD (german), no luck.
Downloaded Activesync 4.1 english, no luck.
Read in the Microsoft man pages, to delete rapi.dll in system32 to make a clean uninstall, but can't find that driver.
- XP Firewall is disabled
- Symantec Virus Scanner is disabled
The S200 is recognized as a Generic RNDIS device.
Q: Do I have to install a special USB driver?
Q: Is ther an issue with the languages?
thanks for your help.
rgds
ROM: 2.9.7.32 GER
ROM: 2/12/06
Funk: 02.07.20
Protocol: 413.1.03
ExtRom: 2.9.7.115
Click to expand...
Click to collapse
I don't think should be a big problem. Maybe have some mess with your drivers, i suggest to deinstall your actual activesync and reinstall it again, actually should work.
I can just post about my experience, i have s200 and i have the old active sync and works fine.
@decmac
Hello Decmac,
I bought the S200 here in Switzerland, so I don't have a T-Mobile image.
rgds
@raskal
I already have de-installed and re-installed the two different versions with the 2 different languages. No luck.
I will now use the sledge hammer and make some test with an "older" Ghost Image on my laptop.
I had the Nokia SW installed for my previous mobile. That SW can't get deinstalled in a decent way, so I assume, that maybe Nokia and QTEK don't really want to cooperate.
thanks for your feedback.
rgds
no connection? mmm Hard Reset?
Hi Guys,
I experienced the same problems as you tell in your message.
The only way was uninstalling Activesync and making Hard Reset to my S200. :?
Later, everything was ok, at least at this moment...
Related
Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre
just reinstall activesync that worked with me
You might get an error if the boxes are checked for synching contacts/appointments etc and you dont have Outlook installed on the pc. Try unchecking all the boxes and see if the error disappears.
pierrevw said:
Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre
Click to expand...
Click to collapse
use the activesync ver3.8
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0
Welcome to the forum Carlos.
First, a couple of pointers:
1) In the future please select more descriptive titles for your threads. Like "Problem after ROM update". It helps people who may know the solution to your problem to find your thread amongst many others.
2) Please do not write everything in bold font. It is better to reserve this for special occasions when you really need to emphasize something.
Now to your problem:
You need to give us some more details so we can help.
What ROM were you using to update your phone?
How far did the upgrade proceed?
What error message did you get?
Note that during update procedure the device will disconnect from ActiveSync and go in to bootloader. This is normal and you must NOT remove the cable or try to reset the device!
Reisntall Windows Mobille
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0 [/QUOTE]
CARLOS ROBERTO said:
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0
Click to expand...
Click to collapse
[/QUOTE]
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)
usbswitch
can he even get past bootloader? in 2 posts he hasn't told us very much.
but anyway...
philocritus said:
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)
Click to expand...
Click to collapse
usbswitch.cab here in case anyone does need it- http://forum.xda-developers.com/attachment.php?attachmentid=39079&d=1179145368
hello for all,
I have one XDA IIi and i have one problem. the PDA is dead, don't turn on. but if I press RESET boton the bootloader work, and on the screen displayed USB ... V1.06. so, when I try upgrade a new ROM the software in my PC don't displayed version are available on PDA and the activesync don't syncronize with PDA.
the software starts upgrade new rom to pda, starts with RADIO, but when that is on 99% and when the start transfer ext rom ocorred one error and don't work.
so, i tryed that process any times and don't work.
please help me.
PS: sorry my english, I am live in portugal
hi,
are you using windows xp or vista? if vista find a friend with a pc running xp as vista wont allow you to update the rom.
also make sure you have the 100% correct 2003se rom NOT wm5 or 6 as they wont work on this pda
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
satoniboy said:
hello,
I have windows xp SP2, and I tried in my laptop and don't work.
when Radio stack finish, one error ocorred.
when I try install o2 english rom ocorred one error: Error 113: Extented ROM Update Error
please where I find 2003 SE ROM for XDA IIi?
thanks
Antonio
Click to expand...
Click to collapse
in these forums, just hunt around for the latest update, but if that dont work, you may have a brocken phone
thanks by reply.
I have someone solution for this.
someone software extra or other solution?
I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
All works great, but still I can't connect to ActiveSync 4.5
When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.
I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.
Please, could you give me any help ?
Thanks in advance.
Beppe
-
i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent
it worked until now
Sorry, my English is bad. But I try to help because I had the same problem.
Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.
Good luck!
Mathias
My Qtek 9090 ask for Activesync 4.5 or newer while connecting.
I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)
I'm quite sure the problem is on PDA.
I hope in some suggestion.
Thanks to all.
Beppe
-
do search on the forum.. you'll find what you need..
cheers
evo
check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc
RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.
Right-click (in control-panel/network-connection) the Qtek entry / Then properties
- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility
Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.
Beppe
-
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
When I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized".
Can someone help me.
Thanks
More Information may help get an answer.
What Operating System are you using? What sync software? (Activesync? Windows Mobile Device Center? Other?)
WM6.1 is an older device platform. Have you been able to sync with PC before?
If yes, what has changed? (New PC, new OS?)
If you just got this device and have never synced it before, are you sure the cable and socket are in good working order?
The OS used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it.
Previously I could connect it to myPC.
Thanks for the reply
I hope you had a recent backup to restore from after the hard reset.
I seem to remember hard reset causing that problem for me under XP. You could try uninstalling ActiveSync and reinstalling it.
Microsoft still has it for download if you need a fresh copy:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141
Yes, I restored the latest backup.
I have uninstalled and reinstalled ActiveSync but the problem remains.
Thanks again for your time
Maybe this thread can help you:
http://www.smartphonegurus.com/forums/topic/4697-htc-kaiser-tytn-iis-not-recognized-by-active-sync/
Wrong section. Thread closed.