Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0
Welcome to the forum Carlos.
First, a couple of pointers:
1) In the future please select more descriptive titles for your threads. Like "Problem after ROM update". It helps people who may know the solution to your problem to find your thread amongst many others.
2) Please do not write everything in bold font. It is better to reserve this for special occasions when you really need to emphasize something.
Now to your problem:
You need to give us some more details so we can help.
What ROM were you using to update your phone?
How far did the upgrade proceed?
What error message did you get?
Note that during update procedure the device will disconnect from ActiveSync and go in to bootloader. This is normal and you must NOT remove the cable or try to reset the device!
Reisntall Windows Mobille
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0 [/QUOTE]
CARLOS ROBERTO said:
Dear friends as I do for reinstalling the operating system (Mobile Windows) in QTEK S200, he recognizes the cable of data more display disconnected in the program Microsoft ActiveSync, the language that came in him it is French, all this happened when I went to update for the ROM , please help me ...thank you very much.
OBS: I DIDN'T MAKE BACKUP OF THE SYSTEM.
P.S The ROM that tried to update it is that of this site after initializing the cable of data it didn't recognize anything - http://rapidshare.com/files/17208693 ...24721_NVID.exe.
QTEK S200
IPL 2.09
SPL 2.09.0000
GSM 02.30.21
THE 3.0.0.0
Click to expand...
Click to collapse
[/QUOTE]
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)
usbswitch
can he even get past bootloader? in 2 posts he hasn't told us very much.
but anyway...
philocritus said:
try changing the usb connect mode from rndis to serial via a .cab file here on the forums(don't remember where it is)
Click to expand...
Click to collapse
usbswitch.cab here in case anyone does need it- http://forum.xda-developers.com/attachment.php?attachmentid=39079&d=1179145368
Related
hi all ..first you are wonderful for creating this site
thanks for all information
My device is HTC made xda 1 which in Turkey sold by escort computer and they build their cooked rom 3.20.03 eng and radio version 3.25.00 900/1800 freq.
Other than rom ver. it is equal of qtek 1010 .
I want to upgrade rom to win2003 .. when I begin the upgrade by activesync my device automatically soft reset itself and on my pc activesync 3.7 ver. shut itself.
I ve tried 3 times but nothing changed . Can you help me please.
Try it with a lower version of ActiveSync. Like V3.5 or V3.6
Regards
Mark
If your current radio stack works ok I would suggest leaving it alone, if your connection to activesync is likely to fail I suggest you use sd card flashing, much more reliable. If you are upgrading radio stack over activesync and the connection fails, you may end up with a pda but no phone. :shock:
I have tired with activesync 3.5 but also my device soft restarts and connection broken.
How do I use wm2003 by my 128 mb sandik SD card. and install the wm2003 to it with bootloader.??
Please make me understand in detail....
Search the forum for "sd flash rom"
For example the following link: http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=sd+rom+flash
Regards,
Mark
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
hi
i have a QTEK S200. Today i tried to update my ppc with a WM6 version, but after 40min. the upgrade program crashed down.
After this it was impossible to enter in the main menu of the ppc. the ppc remains hanging on the QTEK screen. I've tried to enter in the bootloader with the color screen, to connect the ppc with my usb cable an the notebook, but my notebook does'nt find my ppc. And now the battery is empty (even connected with the usb cable on a working pc) and i can't switch on my ppc.
Any solutions?
Charge your Batterie and make Hard Reset. Charge VIA Caddy.
done. but the screen remains on the QTEK start page. Bootloader is possible and i get the 3-color screen but my notebook does'nt find my ppc... It's strange because yesterday everything was fine and the connection to my notebook was ok but in the 3-color screen i can't build a usb connection.
ok, problem solved. i've puted a new core on the ppc and now appears the old wm5.
how did you manage to get back to the old rom ? i am stuck on the qtek screnn and the only thing i can access is the USB flash 3 colors screen but my pc doesn't seem to the device...
any help greatly appreciate )
thx in advance
ben
do you have the problem with the SPL 3.08?
no I am in SPL 2.20... and IPL 2.09...
thanks for your help
please write the full ipl/spl number!
here it is :
IPL : 2.09
SPL : 2.20.0000
thx
finaly I manage to dowgrade it by changing my driver - the problem was coming from vista
important is to know, that the 3-color screen give the possibility to communicate with your computer (connected with usb).
so, you have the possibility to copy a new core on it. after that you put a new wm or you take the old one. in my case, the old wm5 was still on the ppc.
yesterday i was testing the wm6 in german but it was not really nice... so i work again with wm5 and wait till a complete wm6 solution is available.
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Your Qtek wait a new installation of ROM, re-install the original rom completely (See Universal Wiki from this site).
After this unlock completely your UNI (See the Wiki too). Execute ALL the procedure (don't forget steps). Upgrade of bootloader is not necessary in some cases.
Install the new ROM...
Your device is not briked yet, but in bootloader mode if your battery is low, you can't recharge it...
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
hope you!
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
If successed, you can go on to upgrade.
I am not sure it will be work ,but in my Exec , it can work!
i did this on my mda pro, basically you just need to connect the usb cable (to phone and computer)
the serial will change to usb then you can reflash.
Hello,
I've tried to reload my TYTN with Vanilla Rom to resolve the 'no gsm' message on it. During the flash, Usb link is lost and now when I turn on the PDA, I've just the screen above.
Now, the USB port don't work, when I connect the PDA on PC it don't see it. Maybe it is possible to restore it with SD card but how?
Thank you for your help an sorry for my bad english (french...)
Hello,
Nobody coud help me?
Or is that mean than my TYTN is definitely out?
Thanks.
get a storage card less than 2GB, format it and in your PC rename the Signed.nbh file to HERMIMG.nbh. Insert the storage card and put the device in bootloader mode it will start the flash from the sd card
Thanks a lot +QuePPC.
I 've execute your instructions, it better but after bootloader, I have wrote in blue on white screen 'loading', few seconds after 'checking' and finally '00028002' 'not allow'.
After that, the pda return on 4 colored blocs, on the upper (red) there is writting :
in white : HERM200 IPL-1.00
in yellow : HERM200 SPL-1.04
On the lower bloc (white) 'Serial'
When I reset the pda, I have these instructions at the bottom of the screen :
M 05
B 04 No GSM
B 05 D 3.22.0.0
Maybe this malfunction is due to a wrong rom but how identifie the right rom and where found it ?
Maybe it's due to the hardspl not installed but how install it wihout usb connection. ActiveSync don't connect the pda.
Thanks a lot for your help, have a good day.
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Sisise said:
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Click to expand...
Click to collapse
you can start searching at .... http://shipped-roms.com/shipped/Kai....0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe