Database Users

HELP

Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael

miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!

Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael

Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.

And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!

Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release

That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.

Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael

My iPAQ 612 is not recognized on computer.

My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.

apichaix said:
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
Click to expand...
Click to collapse
Hi,
What ROM are you using now ? Normally, if you install AS 4.5, it will wait for a PPC to connect and then make a new profile etc. Unless something went wrong with your ROM-update.
For the latest ROM from HP, look here
Dirk

try using another usb-cable

SEUS desn't see x1 in bootloader screen

Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.

Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!

karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !

fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?

I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/

Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm

Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland

Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.

Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?

I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?

karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.

Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards

VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY

i don't have Vista, XP but same problem...

Persuader X, does it say to you "loading...no image file"?

Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.

Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see

Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.

Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus

Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers

Should like to Flash ROM, but ERROR 260

Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)

run artemis uspl first
remove any sd card if u have
and then try it

Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.

Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP

You need RUU for vista

Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(

I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097

Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879

Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much

[Q] iPAQ 610 radio update

Hi... I'm trying to revive my boss's iPAQ 610.
I readed all the information related to bricked 6xx here and here.
With this info, I can boot the phone loading almost any win mobile, but the sim card never works. When I try the Hpruu last update from HP, the process always freezes at 50% in the radio firmware step (I leave the computer all night trying, changing the configure.ini, but nothing happened).
I discovered that you can delete files from HP update, to install just the parts of the update you like: I made a custom radio update just leaving amss.mbn, amsshd.mbn and PARTITION.NBF, deleting all *.nbf files. It still freezes at 50%.
The DNW.exe software works fine, but I don't know how to make a radio update with this method. ¿Any flash.dio file somewhere?
Then I tryied the SDloader method, but don't know how to load the radio update.
Then i found this post, related to firmware radio update and "Download Qualcomm image mode" and I downloaded QPST 2.7, but I don't know how to make the update this way. I can't find more info related.
I got an USB cable, a 2GB Kingston micro SD card, a card reader and a lot of time
If i can fix the phone my reward is the iPAQ self.
All ideas are welcome.
Greetings from Chile

You say latest from HP. You mean 0.89 firmware?
As i remember, you should first upgrade to 0.88, then to 0.89
Try this one from HP link

My phone's fw is v0.81.
I tryied the v0.88 radio update from the English package, using a custom romupdate.dll to avoid language error, and it freezes at 50%. I tryied the Asia-Pacifico update and the same happened.
Thanx for the idea.

disable firewall and antivirus

I dissabled Nod 32 and Windows Firewall, and is still freezes at 50%.
Also tryied normal and advanced USB mode.
Also tryied the v0.89 update directly.

Did you tried to update in Windows XP, not Vista or 7 ?

Windows XP Sp3

Try this one.
If it dont work, have no ideas what else to suggest.
Maybe keyx know something

i got the same problem as you do, when i update it using the hp update tool its stuck at 42%, winxp sp3. tried everything also from reinstalling active sync etc. etc. but it didnt help, what i did, i used a different computer, for some reason it went thru, I was able to successfully update it to 0.89 hope this helps.

sergiorus said:
Try this one.
If it dont work, have no ideas what else to suggest.
Maybe keyx know something
Click to expand...
Click to collapse
Exactly the same thing happened. Dies at 50%.
Thanx anyway.

odzk said:
i got the same problem as you do, when i update it using the hp update tool its stuck at 42%, winxp sp3. tried everything also from reinstalling active sync etc. etc. but it didnt help, what i did, i used a different computer, for some reason it went thru, I was able to successfully update it to 0.89 hope this helps.
Click to expand...
Click to collapse
I tried at home and 2 PC at office. Maybe the problem is the "Unattended WINXP SP3" version. I'll try the update on other computers.
Thanx.

I can confirm this thing too. I updated my iPAQ 614 with my laptop using Windows 7 a few months ago. Last month I tried again a few times, but no luck (at 50% it dies). When I tried with my desktop computer that has Windows 7 also, it worked. Maybe it has something to do with the USB power or voltage...

Could it be the 2GB microSD card?
Try using smaller capacity, format as FAT-32

Update Radio using microSD
It's posible to upgrade Radio of an ipaq 614c using the microSD similar to ROM update?
The problem I have is my usb port on my 614c is broken.
I'm stuck with FW 0.77
Thanks
Original request: http://forum.xda-developers.com/showthread.php?p=5409756#post5409756

did you fix the sim problem?

i bricked my hp 614c. so i use .Dnw file system on my win7 64 bit.but when i put my bricked my ppc to my pc wit usb there wasn't any action. when i open my pcc it freezes on HP logo?.what can i do?whats your suggesitons? thanks