SEUS desn't see x1 in bootloader screen - XPERIA X1 General

Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.

Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!

karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !

fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?

I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/

Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm

Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland

Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.

Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?

I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?

karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.

Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards

VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY

i don't have Vista, XP but same problem...

Persuader X, does it say to you "loading...no image file"?

Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.

Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see

Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.

Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus

Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers

Related

Big problema, cannot update...help

hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!

First sync with windows Vista

I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
asci said:
I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
Click to expand...
Click to collapse
are you using the beta Vista? you need to download the software call windows mobile device center.
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
asci said:
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
Click to expand...
Click to collapse
have you try connect your p3600 and see whether it sync?
I can't test P3600 because I gave it away. Here it is what I get when I try to sync:
I don't read your language, but based on what you've said, try checking windows update, while your athena is connected. Perhaps, there are files for you to download after you connect. I have Vista Ultimate as well, and the drivers did install when I first synced, so you should be able to have them too.
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
asci said:
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
Click to expand...
Click to collapse
I'm using Vista Business with Dopod U1000 and it runs flawlessly.
But I was getting Hell with Dopod 900 WM6 and Vista synchronization. So much problems, bugs, and inconsistencies.
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Just to let you know i also run Vista Ultimate 64, and uses WMDC, the first time i connect my DOPOD U1000, it install the driver straight away without any problem, then i can start sync with no problem.
mysticbluebmw said:
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Click to expand...
Click to collapse
I'm running Vista 32. About startup disk it could only install Activesync and really I can't fiugure out how to extract drivers needed. About net solution, Vista couldn't find drivers on line...
off topic question to mystic blue..
can you post your avatar as a large image?
thanks..it looks interesting your UI..
Here are a few screenshots. Using Wisbar Advance 2, Wisbar Advanced Desktop, Weather Panel, and Pocketbreeze.
UHm very very OT...please some advice about my problem related to this post will be welcome...
It seems that it cant recognize device...
I Found solution!!!
It's a WMDC bug that start to find RNDIS drivers in wrong folder. So all I had to do was to force it finding drivers in correct folder: C:/windows
Now I can sync!!!
Here it is reference...in italian
http://blog.michelecerreto.com/inde...lema-con-linstallazione-di-un-pda-asus-a636n/
Link here
Got mine working with 64bit windows vista. just deleted that file.
YOU ROCK!!!
YOU ARE THE MAN!!!! You don't have an Idea of how many hours I spend searching a solution for get my htc wizard recognized, your last comment on force the driver search on c:\windows solve my problem too...
But not also with my phone even with a lot of hardware that I can't make get recognized...
Vista seems to be a real pain in.... anyways I don't know how many research I have left but, I have two vista x32 home premiun edition computers one made by gateway and the other by samsung.
And I notice that the samsung one doesn't have any problem recognizing hardware, so I entered to the device manager to see the drivers and I notices must of them run under the 6.0.6000.16389 vista_rtm .....) version and I found that this Driver Kit it's availiable on windows connect for beta testers, so I decide to download them, lets see if this driver kit solve many issues with my gateway.
New Version WMDC 6.1 is available!
New version is available in Microsoft website,you can download freely and install!
It should solve most of the problems!
I'm using Dopod U1000 with Vista Ultimate and WMDC 6.1 without any problem!
My only concern is I'm unable to 'reflow' pdf documents using Vista!(It was very easy with Active Sync4.5 & XP)
Any idea to overcome this problem?
plz share!
dopod 595
i have dopod 595, and now i using vista ultimate 32, i cannot sync my outlook. please advice
thanks

SEUS problem (I have searched the forum)

Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
I noticed something else. Just after the coloured stripes appear, there is a screen that pops up briefly and says "no image file!". After I plug the usb in, the bar with the 0% appears for a short moment, then the scrren goes black and returns to the coloured stripes. The cycle repeats all the time.
What is that "there is no image file!"???
orelsi said:
Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
Click to expand...
Click to collapse
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
poetryrocksalot said:
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
Click to expand...
Click to collapse
I am the administrator.
Sapa13 said:
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
Click to expand...
Click to collapse
Thank you for this, but I want to use SEUS for the update.
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
1. Logon to Vista using your normal username and password.
2. Click on the Start button
3. Click on Start Search.
4. Type, cmd.
5. Right-click cmd, select 'Run as administrator' from the shortcut menu.
6. In the black 'DOS box', type the following at the command line:
Net help user
7. The idea of the last command is just to observe the options for Net User. In particular, examine the syntax to set the password.
8. The next instruction is the crucial command. I have chosen password = p£ssworD, you may want to choose different characters.
9. Net user administrator p£ssw0rd
10. Net user administrator /active:yes
11. Check the message : The command completed successfully
12. Switch User, or logoff
13. Logon as Administrator Password p£ssw0rD (Your password may be different!)
Trap1: There should be no space between the word 'active' and the colon.
/active :yes is wrong.
/active:yes is correct.
Trap2: You need a forward slash before /active
Net user administrator active:yes is wrong
Net user administrator /active:yes is correct
Thanks to Rob Hilton for pointing out this trap.
Trapx: Pay close attention to the command, it should be active, not activate.
I thank Ben O'Sullivan for correcting this activate --> active error.
Well, I also thought that I was the administrator until I realised that I was not... I am not sure if this is the case for you but maybe check again?
EDIT: Nevermind, you got an XP, I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
I would just update it with some else's computer..
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
kirkie said:
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
Click to expand...
Click to collapse
I said in the OP that I got XP Pro SP3
poetryrocksalot said:
I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
Click to expand...
Click to collapse
I formated the SD. Reinstalled the ActiveSync. Did a hard reset. No change.
ActiveSync is working fne when I connect the phone to the PC. It doesn't work when I try to update it via SEUS.
I t really is getting frustrating . Today I needed my GPS, but when I took the phone I had forgotten that I formatted the card earlier..........
ferjan said:
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
Click to expand...
Click to collapse
I formatted the card FAT32. That should solve any issues. In order there to be an image for the update the SEUS should connect to the SD and copy that image in the first place.
poetryrocksalot said:
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
Click to expand...
Click to collapse
The phone is in ActiveSync mode. As I said when the SEUS is trying to identify the phone there are multiple ActiveSync icons appearing on the taskbar. All of them are innactive (grey).
I use the official RA2. Updated through SEUS.
I know there is a stupid little issue that I am overlooking. It is something obvious every time. I can't find it this time though....
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
poetryrocksalot said:
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
Click to expand...
Click to collapse
That shouldn't conflict with SEUS recognizing my device though, right?
Here comes another day of experimenting to find the answer .
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
lunaticxgr said:
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
Click to expand...
Click to collapse
The thing is, I never flashed custom ROMs on this device. All the different ROMs I tried were flashed on another X1. The only thing I have done is hard reseting 10+ times and updating to RA2 via SEUS one time. That's it.
I guess it could work, but I will do it as a last resort. There is something wrong with my phone and I want to know what or at least how to fix it.
Like I said, your R3A has not been released. I will keep saying this until you tell me that you know 100% that the R3A for your Xperia has been released.
I too had the same issue. I also couldn't install the bootloader to load a custom ROM either. Skipping several hours of swearing, soft boots and repeatedly trying the same thing, I discovered the problem was with Kaspersky.
After disabling Kaspersky, I was able to load the Generic UK R3A off the SD card. Never got around to trying SEUS again, but have a go at disabling any internet security software you have.
I guess it's windows vista software issues (NOT POCKET PC SOFTWARE).
I have Windows XP on my laptop and whilst i could flash my x1 fine with the older SEUS client, since they upgraded to the new fancy looking client i face exactly the same problems. The x1 goes in USB mode and SEUS is starting/terminating several activesync processes in the background and then it fails.
Clear the Checkbox
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
minglee said:
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
Click to expand...
Click to collapse
Confirmed this trick. Just yesterday I was trying to update my X1 to R3A, but SEUS couldn't recognize my phone is connected. I've tried to activate built-in windows Administrator account, because it helped me when I was updating to R2A. But this time it didn't work. I was pretty confused, but after few minutes of searching on forum I found suggestion about uncheck that "USB Connection allowed" option. I did it, connected the phone and SEUS recognized it in a second. Tried 3 times and it worked like a charm.
I am running on Vista Home Premium 32bit.

Big pb synchronization

Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
up..please need help
Microsoft Windows Mobile Remote Adapter always wrong....
up up up up up
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
Ok, here goes. I thought I had the same problem but all in all wm device center installed and I could sync, but not before searching and searching.
First and foremost, make sure wm device center is installed and updated with windows update.
2. Plug in device and wait for it to say that device software is installing.
3. Click on start button, and right click on computer. Select manage.
4. Up comes computer management.
5. Select device manager
6. Open network adapters and look for Microsoft Windows Mobile remote adapter and right click on it. Select uninstall.
7. Once it is uninstalled unplug your device and plug it back in. Should be noticed and installed and able to sync again.
I am also using windows 7 64 bit with a new TP2. If that does not work, go to this website and it has other possibilities....
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Good luck and let us know if you get it working.
thanks for your answer but..doesn't work :s
I've tried with my old phone my kaiser and it's work !...:s it's amazing...
i've plug after my tp2 and it's not working!... i've tried it on seven 32bits on another pc and it's work!... :s
i dont understand...:s
Ok, do this. Open task manager and go to Processes tab. Scroll to the bottom and look for wmplayer.exe. It shouldn't be there. Now plug in your device and watch for it to come up. If it pops up and then goes away then let me know and we'll go from there.
i never used wmplayer...
and it's not in my process...
sorry
kwanice said:
i never used wmplayer...
and it's not in my process...
sorry
Click to expand...
Click to collapse
It's not a matter of you using it or not. When you plug in and your computer recognizes it, you'll see wmplayer.exe come up and should stay up while being connected. Try one of your good phones and you'll see it pop up and stay. Just make sure you have task manager up and on Processes.
If it pops up and then goes away, there is a work around but is a big pain in the butt.
You could also have a bad phone. I know one of my HTC Advantages went bad and I had to send it in for a new one because it could not be recognized at all. I even went as far as doing a fresh install on the computer hoping maybe that would work. Turns out nothing did.
Let me know if you see the wmplayer come up or not.
I have also read that it could be a .dll issue, but if it won't work on any other computers that are working fine, then I'm going to run with a bad device.
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
kwanice said:
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
Click to expand...
Click to collapse
I had to edit because I realized I was wrong with windows seven. I believe you might have a bad phone. Have tried using mtty yet?
mtty for?
to see if i can communicate with the phone? for what use?...
thanks
mtty checks the usb connection on the device. You disable usb in activesync/windows mobile device center and then plug in your phone. Run mtty and select usb from the drop down. Then there are several codes you can enter to check for usb connectivity. What the codes are I don't know off the top of my head, but you can do a search and it will give you them on the forums. It is actually a pretty small but usefull piece of software.
thanks a lot for your advice !
i will try tomorrow too tired tonight
i think it will be the last chance after i think i will go where i bought my phone to change it, maybe there is a probleme with my phone...
thanks again
so i try this morning...
impossible to see in mtty the USB port....:s only com1 and com2
i only see usb port when i plug my phone on bootloader and i saw USB on the bottom of screen but i cant do anything....nothing work
when i plug my phone on windows seven, i can choose activesync or disk or internet share : and only the first doesnt work...:s i can use my phone like usb driver or share my internet connexion ...
i think i will phone to the shop because i'm become to be crazy !
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
kwanice said:
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
Click to expand...
Click to collapse
I know this sounds like a stupid question, but have you ran a registry cleaner or defrag program on your windows seven machine? If no then again I'm at a loss and will research this some more since I have time tonight. If so, then that more than likely is the culprit because I have ran different registry defrag/cleaner programs and once done, then windows mobile device does not function properly and I have to restore the registry from the back up that I would make prior to deletion. We'll get it figured out.....I hope.
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
kwanice said:
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
Click to expand...
Click to collapse
I'm glad you figured it out and it is strange that the BIOS fixed it, but hay if it worked, great. I know this is a constant issue for wmdc and windows mobile devices, so that is why I tryed to help out. I gave you what I learned from my experiences and searching this forum like crazy. Thank and I might take you up on the PM one day.
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
For future reference:
I had the same prob with energy photon/WMDC/Windows 7
Untick "ask me 1st about usb conection type" in USB to PC, then soft reset
Prroblem solved!

needed real help for upgrading 6.5

when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.

Categories

Resources