Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
I noticed something else. Just after the coloured stripes appear, there is a screen that pops up briefly and says "no image file!". After I plug the usb in, the bar with the 0% appears for a short moment, then the scrren goes black and returns to the coloured stripes. The cycle repeats all the time.
What is that "there is no image file!"???
orelsi said:
Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
Click to expand...
Click to collapse
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
poetryrocksalot said:
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
Click to expand...
Click to collapse
I am the administrator.
Sapa13 said:
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
Click to expand...
Click to collapse
Thank you for this, but I want to use SEUS for the update.
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
1. Logon to Vista using your normal username and password.
2. Click on the Start button
3. Click on Start Search.
4. Type, cmd.
5. Right-click cmd, select 'Run as administrator' from the shortcut menu.
6. In the black 'DOS box', type the following at the command line:
Net help user
7. The idea of the last command is just to observe the options for Net User. In particular, examine the syntax to set the password.
8. The next instruction is the crucial command. I have chosen password = p£ssworD, you may want to choose different characters.
9. Net user administrator p£ssw0rd
10. Net user administrator /active:yes
11. Check the message : The command completed successfully
12. Switch User, or logoff
13. Logon as Administrator Password p£ssw0rD (Your password may be different!)
Trap1: There should be no space between the word 'active' and the colon.
/active :yes is wrong.
/active:yes is correct.
Trap2: You need a forward slash before /active
Net user administrator active:yes is wrong
Net user administrator /active:yes is correct
Thanks to Rob Hilton for pointing out this trap.
Trapx: Pay close attention to the command, it should be active, not activate.
I thank Ben O'Sullivan for correcting this activate --> active error.
Well, I also thought that I was the administrator until I realised that I was not... I am not sure if this is the case for you but maybe check again?
EDIT: Nevermind, you got an XP, I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
I would just update it with some else's computer..
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
kirkie said:
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
Click to expand...
Click to collapse
I said in the OP that I got XP Pro SP3
poetryrocksalot said:
I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
Click to expand...
Click to collapse
I formated the SD. Reinstalled the ActiveSync. Did a hard reset. No change.
ActiveSync is working fne when I connect the phone to the PC. It doesn't work when I try to update it via SEUS.
I t really is getting frustrating . Today I needed my GPS, but when I took the phone I had forgotten that I formatted the card earlier..........
ferjan said:
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
Click to expand...
Click to collapse
I formatted the card FAT32. That should solve any issues. In order there to be an image for the update the SEUS should connect to the SD and copy that image in the first place.
poetryrocksalot said:
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
Click to expand...
Click to collapse
The phone is in ActiveSync mode. As I said when the SEUS is trying to identify the phone there are multiple ActiveSync icons appearing on the taskbar. All of them are innactive (grey).
I use the official RA2. Updated through SEUS.
I know there is a stupid little issue that I am overlooking. It is something obvious every time. I can't find it this time though....
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
poetryrocksalot said:
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
Click to expand...
Click to collapse
That shouldn't conflict with SEUS recognizing my device though, right?
Here comes another day of experimenting to find the answer .
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
lunaticxgr said:
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
Click to expand...
Click to collapse
The thing is, I never flashed custom ROMs on this device. All the different ROMs I tried were flashed on another X1. The only thing I have done is hard reseting 10+ times and updating to RA2 via SEUS one time. That's it.
I guess it could work, but I will do it as a last resort. There is something wrong with my phone and I want to know what or at least how to fix it.
Like I said, your R3A has not been released. I will keep saying this until you tell me that you know 100% that the R3A for your Xperia has been released.
I too had the same issue. I also couldn't install the bootloader to load a custom ROM either. Skipping several hours of swearing, soft boots and repeatedly trying the same thing, I discovered the problem was with Kaspersky.
After disabling Kaspersky, I was able to load the Generic UK R3A off the SD card. Never got around to trying SEUS again, but have a go at disabling any internet security software you have.
I guess it's windows vista software issues (NOT POCKET PC SOFTWARE).
I have Windows XP on my laptop and whilst i could flash my x1 fine with the older SEUS client, since they upgraded to the new fancy looking client i face exactly the same problems. The x1 goes in USB mode and SEUS is starting/terminating several activesync processes in the background and then it fails.
Clear the Checkbox
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
minglee said:
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
Click to expand...
Click to collapse
Confirmed this trick. Just yesterday I was trying to update my X1 to R3A, but SEUS couldn't recognize my phone is connected. I've tried to activate built-in windows Administrator account, because it helped me when I was updating to R2A. But this time it didn't work. I was pretty confused, but after few minutes of searching on forum I found suggestion about uncheck that "USB Connection allowed" option. I did it, connected the phone and SEUS recognized it in a second. Tried 3 times and it worked like a charm.
I am running on Vista Home Premium 32bit.
Related
Hi to all,
I have a very strange problem with the connection with activesync.
When i got the Qtek 2020, i was able to syncronise on the USB cradle easily.
After some time i decided to connect via bluetooth.
No problems there!
Activesync is working excellent via bluetooth!
But..
Now i cannot connect via USB !!!!!
I tried a fresh install on another PC of activesync (even the new version from MS), but nothing! The activesync icon is always grey! it cannot connect.
Windows find the USB cradle and the PPC OK, but nothing more.
The cradle and the PPC port must be working because i see that the battery is charging when i have it cradled.
In the PPC settings options--options i have the USB selected.
Any ideas??
TIA
try running
\windows\repllig.exe
and then put the device in the cradle
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
Thank you for your answer,
u mean the repllog.exe file?
I will try that ok!
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
I run repllog.exe couple of times on the cradle and it Worked !!!!!!!!!!!
Thank you very much!!!
lads
i have had a similar problem and was pointed towards this topic.im excited that i will be able to use all the functions fo the phone again.
i just dont know how to run this exe.where is it and how do i run it and what happens when i run it
cheers in advance
zag
still looking for help set this up,
how do i run it please
rob
this forum is fairly disappointing , i was told advise was easy to get.
is there any one who will help me sync my xda please
rob
If you look at Rudegears reply you will see that the file is in the windows directory.
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
I had a similar problem. the answer:
Re-install activesync 4 WITHOUT the cradle or usb cable attached to the computer. plug it all in after the installation.
hope that helps.
Darrell said:
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
Click to expand...
Click to collapse
I also have this kind of problem ... anyone can help ??? I want to install activesync 3.8 since I encountered internet pass through problem. TIA.
cruisin-thru said:
If you look at Rudegears reply you will see that the file is in the windows directory.
Click to expand...
Click to collapse
It's not in my Windows folder!
I'm running Windows XP SP2
Activesync 3.8 is very slow... It actually stops responding whenever I dock my device - then starts working after a few minutes!
I thought this might fix my problem, but I can't find the executable anywhere!!!
I have an 8525 running WM6 AT&T version. It is not recognized by my PC.
It has been running fine until the Battery died 2 weeks ago. After that I can not sync. My PC does not recognize the device. The USB Cable and connection works since my portable USB hard drive works on the same connection. I have re-formatted my PC and installed Activesync 4.5. Active Sync 4.5 is the version I have been using for over 3 months. The phone has been Hard Reset. The phone works with the exception of the Sync.
Any ideas?
flash it with another rom, that isnt an official update for your device, i.e. the o2 rom update,then see if it syncs? if that works flash it back with the at&t rom. I had this problem with my hermes(mda vario II) when i flashed the at&t wm6 rom but as soon as i flashed with the o2 rom it synced fine, even with vista
Thanks for the reply. But my PC does not sync at all and I do not have access to another one at the moment so I can't flash another ROM.
It was working up to a week ago.
if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.
Happened to me too for a minute....
I d\l ActiveSync 4.5 again and reinstalled... all was good.
Try that before smashing computer...
Guess something went wrong... 4.5 worked fine then I decided to flash the radio again. Frustrated me to no end. But reinstalling AS4.5 worked for me.
Update:
I tried reinstalling ActiveSync. Did not fix the problem.
Funny thing is that the USB plug will charge the unit but I can't Sync. It won't recognize the device. Another funny thing is that the USB on the phone does not turn on. Does look like a hardware issue then?
Troubleshooting 101... I'd try a different cable first. Then a different USB port (back, front) of the PC. Then I'd try a different computer. I'd be relatively surprised if it turns out to be the phone - but... Possible, I suppose.
right click on my computer and click manage, then click on the device manager on the top left window and a list of devices will appear on the right.
If your ppc is connected unplug it, wait a few seconds then plug it back in and you will see the screen of your devices change. If you get a unknown device or device with and exclamation mark in a yellow triangle then right click on it and click remove wait for the confirmation that it has been removed then unplug the device and wait a few seconds then plug it back it again.
If all that is useless in that it doesnt even show as an unknown device then check the universal serial bus controllers section by clicking on the + to the right of it to expand the tree and check in there if there are any unknown devices and remove them.
If after all that it still fails right click on the ruu exe file and click extract to ruu_filename and extract the contents of the file to the said folder then open the folder and inside is another exe file call ruu_inside.exe right click on that and extract that the same way by right clicking on it and click extract to ruu_filename then open that folder and rename the RUU_signed.nbh to hermimg.nbh get a blank sd card format it in the device so nothing is on it then copy the hermimg.nbh to the card. Then enter bootloader by pressing top left side button top right side button and camera button at the same time as you reset with the stylus and it will update from the sd card
galaxys said:
if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.
Click to expand...
Click to collapse
I tried this, reinstalled activesync, then it FINALLY WORKED. Thanks!
My activesync has been broken for a couple of days. I am pretty OCD so I have been on a warpath to fix it.
On a positive note, I couldn't get the new ATT rom to load, so I did everything else - I now have SIM and CID unlocked phone with vp3G's rom and I am liking it very well!
i had the same problem..i just un-installed activesync 4.5 and re-installed it. Then installed the new AT&T rom (WM6). i had the schaps verison on their before but it was giving me hell and after i replaced it with the AT&T version all is well...
OMG!!! I was freaking over this. New ATT WM6 ROM installed, was a bear but got it synched to AS 4.5 at work..but could not explore. Came home, and nothing I tried would even let me sync on my home pc! Note, this PC has been syncing WM Devices for over 5 years now, I am no newb to them!
I was even getting the "USB does not recognize this device" error! WTF!!!!!!!
After uninstalling and re-installing AS many times, cleaning the registry, doing a Hard Rest to the device...all to no avail....until I searched in here:
Quote:
if u haven't already, then make sure 'enable advanced network functionality' is unchecked on device.
That fixed it!!!! Why? I have no f'ing idea. And curse ATT/MS for having it enabled!
First try and I was able to connect , synch, explore....viola!!!
You should also mentioned where to find it:
You can find that Fubar setting by going to Settings/Connections/USB to PC
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8
Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.
Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!
karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.
Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards
VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY
i don't have Vista, XP but same problem...
Persuader X, does it say to you "loading...no image file"?
Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.
Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see
Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.
Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus
Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers
hello i just get my htc hd2 and i want to install apps and games and do all those stuff that are in this website.. (put android....etc....)
but i cant because i cannot open Windows mobile device center... i have windows 7 ultimate 64-bit OS.... i have tried thousands of methods to make it work and i still cant!!... the WMDC icon appears in the all programs list but i click it and nothing happens... also there is a folder named windows mobile and the C:\Windows... but nothing works!!... i connect my HTC HD2 and run it in Sync mode and in Storage Mode and nothing happens again !
IM SO DESESPERATE!!!
if someone could help me i would be so happy thanks...
if need more info just tell me!
Try a few things-
1-Check to see if you have the latest version of WMDC, which is version 6.1
2-Reinstall WMDC if you do indeed have the latest version
3-Goto device manager and delete your Windows phone from your PC
4-It may be your device, try a hard-reset if that up there fails
5-and finally, if ALL ELSE fails, it may be your USB connector on your phone is bad. We have seen this quite a few times, seems to be a fairly common problem.
One other possibility.... the ugly truth is that I have to uninstall my antivirus program everytime I flash my rom and create a new partnership with WMDC. UGH!! this was microsoft's only answer to the problem. Please try it before you do a hard reset.
for me it never syncs (after a new flash) until i
settings menu all settings connection usb to pc
untick"enable faster data"
if you have connected the phone before doing this, reboot both the phone and the pc and try again.
I was having what I think is the same problem. Try going to setting (the tab in Sense) and select other. There is an icon that says something like usb-computer open that and de-select speed up ActiveSync conectivity or something along thoes lines.
I was able to sync after that.
samsamuel said:
for me it never syncs (after a new flash) until i
settings menu all settings connection usb to pc
untick"enable faster data"
if you have connected the phone before doing this, reboot both the phone and the pc and try again.
Click to expand...
Click to collapse
My would charge when i pugged into the USB, but wouldnt sync. I tried this and and it worked =) THANKS!