Wing Problem - Wing, P4350 General

Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?

When you hard reset did you keep holding down the softkeys after you pressed the soft rest button? When done correctly a prompt to soft reset should come up after about 5 seconds

yes, I did

no one got a clue?

Go into bootloader mode and run the TMO RUU.

I was tryin to avoid that. But, I just done it
Thanks

Related

How to *really* hard reset Universal to factory condition

With all this talk about WM5 devices not really resetting everything after a hard reset, and my device being dead and not recovering after a hard reset makes me think, there must be an alternate way to really hard reset a device back to factory condition.
I tried a lot of combinations of presses to no end. The only thing I am suspicious about but did not play with is a red/white round sticker (which looks like it is hiding a button) under the battery (upper left corner).
Anyone know what that is, or is there a way to do a harder reset? Taking the battery out for a few days did not help either.
Because flash memory actually needs erasing rather than just resetting I doubt it is possible to clear it with a simple button press. It may be you can do a normal hard reset and hold down a button to bypass loading data from the flash then format it. But I've no idea really.
Jamie
Re-flash the ROM?
uuummm some where in this forum i read that if you have wm2005 and go to boot loader mode you get an option over there to clear the cache or memory something like that, and that would give you a clean installation.....
haven't tried it though.....and i doubt i would get such an option in wm2003se, also i have a similar problem i did a complete flash reinstallation of rom to my device and after the installation i opened windows media player (wasnt the first thing i opened, but didnt copy any files)and guess what....i had a song available over there..... which i could actually play and it did....i checked the location of the file and it was somewhere in my device or documents dont quite remember i did a hard reset again and same issue....
after that i have'nt tried anything the rom is same i just deleted the folder manually but i would also like to know how to TOTALLLLLLY ERASE ALL DATA from the device and clean install everything
regards
on the XDA II and WM5 you hold down the buttons to resent stage then i gives you three options. One of these I am sure clears the phone
I hard reset my Universal several times (well I think I did at least)
Press the soft reset plus the two "-" buttons and you will have a white screen asking if you want to put back your HTC back factory default
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
i tried some of them according to herein, but some of them were not function.
http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
there's a little icon called "clear storage" which brings your settings to the factory's default. what's wrong with it?
i'm stuck too in bootloader with my mda pro
atekant said:
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
Click to expand...
Click to collapse
This may be too late, but there's no way to do any sort of a reset to revert back to a previous ROM... the only thing you can do is reflash the earlier ROM.
Brett
ok ... now the final BIG request ... who can give us an update that works. the patched Maupgradeut_noid is not working with the latest upgrade.
thanks.
To revert back to clean copy of OS (i.e newly installed OS)
Hi,
Just to share with you my experience in reverting my phone to its original OS condition. Before that, just to give you guys some background.
1. Upgraded from PPC2003 to WM5
2. Tried install some patch to enable file transfer (OBEX) in BT
3. Suddenly, the phone screen gone missing. Phone shows No Signal. Cannot receive call.
3a. Did a OS reflash again, but still does not solve the problem.
4. **Panic for a moment **
5. Looked thro Program Files, and seems like some appln i installed were not erased despite doing a hard reset. So, i guess the hard reset doesnt erase some portion of the memory
6. Googled for a solution, but most said do hard reset
7. Went back xda-developers.com site to look for solution
8. Finally found a method. see http://forum.xda-developers.com/showpost.php?p=1164331 to do a format on the memory
Now, my phone is working fine. The phone screen is back and it shows my telco name, and can receive call
Hope this helps.
Rgds,
Choon
you're in the wrong forum mate

White Screen only

I just installed this program, used default settings, apllied, My 8125 soft reset.
Now I cannot see anthing past the initial screen that lists IPL and SPL version.
Just a plain white screen, Active sync wont work, no buttons work. Please help !!!!!!!!!!
If you're stuck I think the only next step would be a hard reset which is going to drop it back to the base factory build so you'll lose anything you've installed etc.
How do I hard reset 8125, with buttons only (key / button combination) OS does not boot or visible.
press the "connetions" button (on the left hand side of the unit next to volume up/down) with the "voice" button (right hand side of the unit opposite the connections button) and then use the stylus to do the normal soft reset and it should hard reset back to factory settings - it's described in the manual
Tried hard reset several times, no luck.
All I did was installed registry wizard from here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
and now I can't get it to do anything, anymore suggestions ?, your help is really appriciated, I have only had the phone to 2 days and its dead already
try holding the same two buttons and then hitting the power button instead of the reset thingy... this method was easier for me... If this dosen't work you will have to enter bootloader mode and reflash the rom.
For the detailed reset procedures try here
By the way, did you use that program to change the default input method?? I use it all the time and the only time it gave me the whitescreen is when I tried to change the default input...Oops. I believe that you should be able to use that program safely, just leave the default input alone... Hope this helps.
Thanks for info, I did manage to reload the ROM. and Yes I did change the default input method, that might have done it. Thanks all, for your Help.
raheelb did you have the warning that the proggie cannot recognize the AKU version?
I had had such a warning, unfortunately bypassed it and had the same issue (white screen) - any one knows why the RegistryWizard cannot recognize AKU version? I have the original Qtek 2.17 ROM installed... :?

Please Help I Bricked My T Mobile Wing

i was loading the Touch-IT v2.3 beta for wing rom when i got an error and my phone froze up and would not connect to the pc so i soft reset it and now my tmobile screen freezes on load if anyone could help me it would be great.
I got the bootloader runing but i just wanted to see should i try installing the rom again or reload the original 1
Try to install official Tmo RUU
Try pressing and hold camera and then press into the soft reset hole if its the wing and then try and run the hard spl...if that doesnt work then im clueless....hope i helped...
k thanks i got it now
i ve got the same problem.. how di you fix your??s
Try a hard reset push the soft reset button on the side and hold both of the soft keys keep holding the soft keys until a black screen comes up with white lettering. than press the call button hoped that helped
Sorry quick thread hijack.. im reading here and getting ready to unlock/flash my girlfriend's tmobile wing and was wondering.. if you brick your phone, does a hard reset always return your phone to working, OEM condition? or is it possible that you could permanently damage it beyond hard resetting repair?
Thanks!
you can brick your phone beyond repair, but its actually rather hard to do so. Most people THINK they've bricked their phones, but they actually haven't. Just HardSPL the phone, and it will be virtually unbrickable.
Hard reset essentially reflashes your rom over your current installation. it wont return it to the original rom that came with the phone, but i will reset everything.
thanks! i'll remember that.

Dopod 818 Pro Problem

Hi guys, I just took over my dad's Dopod that was running under Windows Mobile 5 today.
During which, I installed:
PCCPIMBACKUP (and did a back up)
FIXUNREADCOUNT.exe and ran it.
After that, I resetted the device manually by holding down the power off switch and now my device won't start up again. IT keeps going to the "Dopod Screen" where is later restarts and attempts o switch on again.
IPL 1.00
SPL 1.00.00000
GSM 01.13.20
OS 1.0.13.21
I have not installed any other software except for these and I have attempted to hard reset twice with no avail.
Any help will be greatly appreciated.
are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...
wanwarlock said:
are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...
Click to expand...
Click to collapse
Yeap, did that. I hard reseted it a few times, tossed it about (literarily) and the just left it alone for the night. The next morning it switched on and hasn't been giving me much issues. Though I just found out the loudspeakers are busted. ):
Did you Check your baterry?
Hello pal...
Today i just hard reset my dopod 818 pro via setting and clear storage.. its done nicely.. until i install ezinput keyboard and after soft reset my device is unbootable...
i try to hard reset my device (press camera and comm manager and poke reset button) but just colurful screen appears (red,green, blue) according to tutorial, the send command will appear... please help me..

Hard reset dind't work

Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat

Categories

Resources