Database Users

my k-jam hangs

Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....

Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.

Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks

Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks

Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?

Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.

hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.

Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.

Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.

Wing Problem

Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?

When you hard reset did you keep holding down the softkeys after you pressed the soft rest button? When done correctly a prompt to soft reset should come up after about 5 seconds

yes, I did

no one got a clue?

Go into bootloader mode and run the TMO RUU.

I was tryin to avoid that. But, I just done it
Thanks

After Hard Reset can't unlock touchscreen not working?

I just got a Prophet which was flashed to a WM6.1 ROM. I did a hard reset but now I get to the start screen where I am supposed to unlock it, but the touchscreen doesn't seem to work. I press the Left soft button to do the unlock process, but when I tap the unlock button that comes up nothing happens, as if the touchscreen is not working.
Touchscreen is confirmed to be alive before the hardreset, any ideas what happened? I don't even know why it's locked on startup usually you do the configuration stuff after a hard reset (Must be the ROM that's on it)
I am thinking I will have to flash a new ROM but if there is a way to fix it without reflashing that would be better.

Nevermind guys, I don't know what went wrong but a quick re-flash fixed it.

Hard reset dind't work

Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat

HELP !!!!!

Hi i have a TP2 and i installed an app called truecaller (Beta version) now it says its over and i have a screen that tells me its over and to go to website to buy/get newer version ......i cant get rid of that screen and my phone isnt working i have tried a hard reset but nothing it wont connect to my pc ...its locked up i neeed help !!!!!

If you get into the bootloader screen(hold power and down key while restting) you can flash your rom from there. since you allready did a hard reset that wont be much of a leap for you i wouldnt think.

i dont have a down key...if i do a hard reset and start phone with no sim its fine as soon as i add sim and restart i get that damn screen

You said that you installed that program yourself. Then you didn't hard reset. Otherwise the program would be gone. Press the call button + end button + power on. That is the way to hard reset.

i have hard reset about 10 times now ............im gonna try to flash a diff rom and see what happens but im so confused as to what this is all about

Did you already try to contact the maker of the program? Maybe they know of the issue, and also have a solution.

theworm20uk said:
Hi i have a TP2 and i installed an app called truecaller (Beta version) now it says its over and i have a screen that tells me its over and to go to website to buy/get newer version ......i cant get rid of that screen and my phone isnt working i have tried a hard reset but nothing it wont connect to my pc ...its locked up i neeed help !!!!!
Click to expand...
Click to collapse
Really strange if you cant get rid of that screen after a hardreset(sounds impossible)
I have to ask you, have you mixed up hard reset with soft reset, dont mean to offend you but I have heard it happened for some...

im not offended ...yeah i did hard resets (hold power ,call and end key ) still couldnt get rid of it i flashed back to a prev energy rom and all is ok .......i just want my sense 2.5 back ....lol thank for all ya input