Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat
Related
Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
I have a big problem with my mda vario.
the begenning: !. i done a hardreset and before finishing a softreset.
now my ppc doesnt boot anymore. the hung up is by the screen of t-mobile.
Plese help me!
What can i do now, is my mda vario over?
No resets bring me forward
Touchscreen or any other buttons doesnt react and doesnt work anymore.
The only thing that i can do is to remove the battery
Stupid question, but why would you do a soft reset in the middle of a hard reset?
Anyway, probably your best bet would be to download the latest t-mobile rom, put your phone in bootloader mode and flash the rom again. This time, avoid doing a soft reset in the middle of it.
how do i install the rom in the ppc if it doesnt boot.
can you give me a todo list, please ?
how can i put my phone in bootloader mode
Press and hold the camera key and then press the on button. When multicolored bootloader screen comes up release the camera button and then you're ready to flash.
i was loading the Touch-IT v2.3 beta for wing rom when i got an error and my phone froze up and would not connect to the pc so i soft reset it and now my tmobile screen freezes on load if anyone could help me it would be great.
I got the bootloader runing but i just wanted to see should i try installing the rom again or reload the original 1
Try to install official Tmo RUU
Try pressing and hold camera and then press into the soft reset hole if its the wing and then try and run the hard spl...if that doesnt work then im clueless....hope i helped...
k thanks i got it now
i ve got the same problem.. how di you fix your??s
Try a hard reset push the soft reset button on the side and hold both of the soft keys keep holding the soft keys until a black screen comes up with white lettering. than press the call button hoped that helped
Sorry quick thread hijack.. im reading here and getting ready to unlock/flash my girlfriend's tmobile wing and was wondering.. if you brick your phone, does a hard reset always return your phone to working, OEM condition? or is it possible that you could permanently damage it beyond hard resetting repair?
Thanks!
you can brick your phone beyond repair, but its actually rather hard to do so. Most people THINK they've bricked their phones, but they actually haven't. Just HardSPL the phone, and it will be virtually unbrickable.
Hard reset essentially reflashes your rom over your current installation. it wont return it to the original rom that came with the phone, but i will reset everything.
thanks! i'll remember that.
I just got a Prophet which was flashed to a WM6.1 ROM. I did a hard reset but now I get to the start screen where I am supposed to unlock it, but the touchscreen doesn't seem to work. I press the Left soft button to do the unlock process, but when I tap the unlock button that comes up nothing happens, as if the touchscreen is not working.
Touchscreen is confirmed to be alive before the hardreset, any ideas what happened? I don't even know why it's locked on startup usually you do the configuration stuff after a hard reset (Must be the ROM that's on it)
I am thinking I will have to flash a new ROM but if there is a way to fix it without reflashing that would be better.
Nevermind guys, I don't know what went wrong but a quick re-flash fixed it.
Hi guys.
I recently installed Onyx Micro on my Elf, and it's been great. I needed a "Home" panel though, so I installed a Home application that I had on my memory card, and after that reset, my phone's been unusable. When i turn it on, it either hangs, or gives me an error that says something to the effect of "phonesyslog has malfunctioned", and then freezes.
I can't get it connected with Actiesync, I can't hard-reset it either. Any idea what I can do?
Can anyone help me?
Hi,
Did you try removing the memory card? In case that doesn't help, try pressing the camera button while starting up, this should enter the bootloader mode, which enables you to flash a new rom. Do this in Windows XP, as Vista can cause problems. If you've never flashed a rom, try searching this forum for an appropriate rom and a how-to-guide.
Regards,
murosama
Hard reset should work and should be all you need to solve your problem. Make sure that you are performing the hard reset correctly.
For a hard-reset without access to the systems menu do the following:
Make sure the device is switched off, then press both the green and the red phone button and while keeping them pressed switch on the device.
A menu should appear, asking you to confirm the hard-reset.
(Upon confirmation, all data will be erased and the out-of-box state will be restored.)
In case that doesn't work, try flashing a rom that is native to your device
(as suggested above).
Good luck,
murosama
I got the same problem i tryed all off this but didn`t work did you find a sollution for yours?