Related
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
I have a similar WiFi connectivity problem, but after reading of the poor service provided by most vendors and HTC itself, I will try to gather some more experience with the problem before I contact HTC or my vendor, and hopefully find a solution. Bellow is my experience so far:
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
I could add to the above mentioned problems.
i got a new hd just few days back.
The wifi worked great. But now it doesnt.
I have disabled wifi, so can start it whenever i require.
I click on wifi button to enable it.
Then open opera, try any website.
it will open fine.
For instance say my email at gmail.com
Now after that if i try to open anysites or even continue with my mail, it shows error saying connection not available.
One of the workaround is to go back to toggele wifi off and switched it on.
Not sure if anyone faces a similar issue.
I's been about a week since my last post and I have already witnessed a couple of cycles of WiFi connecting perfectly and then not connecting at all.
No matter the settings I try after it decides not to connect, it won't. Even to nodes it had connected perfectly and fast jus minutes before.
I thought re-flashing might help but so far has proven ineffective. Once I thought some part of the non-volitile memory was causing the problem since after I cleared the memory I could connect for a while.
Any thoughts anyone?
Same problems here.
For the last hour I have been reading 10ths of threads here concerning WiFi problems.
My HD's WiFi worked fine on my home and outside for about 2 months. Now it doesn't. It reports connection, but no program can use the internet. At best, it seems to be able to exchange some Kbytes the for just a few seconds after a connection is established. Then nothing. Connected but unusable.
Tried everything Internet/My Work/My ISP, WAP enabled/disabled, soft/hard reset, everything.
When connected through ActiveSync everything works fine, all programs see internet.
Has anybody taken their HD to the service? Has any HTC service worldwide identified the problem as hardware and solved it by replacing something?
miskasp said:
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
Click to expand...
Click to collapse
I have just encountered a similar problem, but already used wpa/wpa2 with aes. Have tried a hard reset with no joy. My old HTC Touch has no probs connecting via wifi nor does my laptop so I would surmise that the prob is with the HD and not the router.
I am going to try flashing with the latest version of Duttys 6.1 rom and see what gives.
Edit: Tried flashing with new rom with no success. Take a look at this post.
http://forum.xda-developers.com/showpost.php?p=3769339&postcount=7
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Try to go into WiFi settings and move the power slider to max performance. I need to do it here to access my router. This happened also with my HTC TyTN II, with any recent radio firmware. The original WM 6.0 ROM and it's radio work fine in low power mode, but the new ones appear connected but are always at 1 Mbps and there's no traffic until you move the slider to performance mode.
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
(sorry for my english)
Dubh Llas said:
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Click to expand...
Click to collapse
Yeah, but what if I 'm not Orange-UK (let alone UK) ?
vcespon said:
Try to go into WiFi settings and move the power slider to max performance.
Click to expand...
Click to collapse
1st thing I did. Problem still there.
campotino said:
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
Click to expand...
Click to collapse
This is not a solution. I didn 't buy the device to be able to connect to my home WiFi only. What about public hotspots? Or hotels? Or whatever outside your home?
This is very odd. Suddenly today I'm getting connection errors (GPRS) on every program on my phone EXCEPT for Skyfire. Skyfire can connect and surf the net with no problem, but not one other app on my phone will connect to the net, and I've tried several browsers as well as apps that connect directly (i.e. YouTube, Google Maps, etc).
I'm on AT&T in the US (New Orleans, specifically). I've checked and triple-checked my Media Net connection settings, and nothing has changed that I can see since the last time I was able to use it successfully. I've soft-reset several times, to no avail. I don't know if this is an issue, but while I was using WiFiWMRouter yesterday, it crashed. But I used the "Reset All Settings" function of that which is a crash cleanup of sorts, and still no luck.
What else can I check? It would seem that if it were an AT&T issue, Skyfire wouldn't be able to connect either!
Weird, I have the exact same problem too. I probably wouldn't have known that Skyfire could connect until I saw your post. My problem began (I think) when I uninstalled WMWifiRouter last night. I haven't gotten a connection with any other app since then. I had a hell of a time uninstalling an old version or WMWR I had installed just so I could install the PAID version and now it is apparently causing problems even on uninstall...
To add to this - I've confirmed that devices connected with ICS can connect to the internet through the phone. So it seems to me that the problem is related to some wifi settings (maybe that WMWR sets up) that aren't being "released" when wifi is turned off/disconnected.
If I do a hard reset the connection seems fine. If I then restore a backup from right before the problem started the connection is okay, but only until I try wifi again. From then on it's borked until I restore the backup again... frustrating as hell.
FWIW - I think I pinned down what was going on with my phone. In my wifi settings something (probably WMWR or Phojo) had set a static IP when establishing an ad-hoc network and didn't revert to "obtain an IP address automatically" when I quit/uninstalled the program. I don't know why the IP address of the wifi network adapter affects my cellular data connection, but setting that to "obtain automatically" and turning wifi back off allowed my phone to connect again. So it seems like it was using that IP address regardless.
Hi everyone.
First off, I know there are a million and one other threads.. believe me.. I have searched!
Basically my phone won't connect to my network. It was working fine earlier today. I've tried changing all the security settings in my router (turning off encryption for example). I've tried soft resetting and hard resetting the phone.
Nothing seems to be working. It finds the network fine, but it just says 'Connecting' then goes to 'Available' but it won't use the wifi connection.
Any ideas?
Thanks!
Have you tried connecting your device using a friends wifi router to see if this connect you
Nope. I forgot to add that I will try connecting to work's WiFi tomorrow!
Anything to try in the mean time?
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
miland said:
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
Click to expand...
Click to collapse
1) Can't see any settings under my router.
2) Tried disabling gnitro (Belkin router), no difference.
3) No difference
4) Already on that.
5) Turned off.
It's so odd. Works fine with an N95.
I don't think it's anything to do with my router because like I said it worked fine earlier on in the day then suddenly stopped. The router settings hadn't changed.
Edit: I've tried turning the router security off altogether also. I really don't feel it's an issue with my router.
Tested the phone at work. It works fine.. so I don't have a clue why it's not working at home? Surely the router can't be incompatible with the phone.. especially considering it worked at one point.
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
AltF4me said:
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
Click to expand...
Click to collapse
Maybe uve tried this already but could be the fact that your home internet access point is listed as Work rather than internet, used to have an issue with mine cause of that.
I also have this problem.
Reset did not help.
Listed as internet or work did not help in both cases.
Real weird!!
I've got the same problem, all of a sudden my hd won't connect to my router.
I can connect to open networks (wi-fi hotspots etc) so i know the wifi in the phone is working ok and my partners diamond can connect ok to my router, so the router is obviously ok.
Have reset the router as well and haven't changed any settings on the phone.
Don't understand!!!!
as other users point out within other threads, it seems that Blackstone has a problem connecting to wifi networks when WPA Authentification is enabled
try to disable it. it worked for me and soem other guys
good luck!
I could connect to my router fine using my laptop.. but I still had to reset my router to the factory settings before it worked again on my Touch HD.. then I could enable WPA and everything back again. So try that!
i thought i had a similiar problem, mine wouldnt connect to wifi, kept switching itself off. figured this is normal when its connected to usb. unplug usb and it turns back on!
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
Hi
I used to have problem using any secure wireless connection. Then I realized that you need a personal certificate to use secure wireless networks. It uses certificate to encrypt connection between access point. I have access to a windows certificate server so I created a personal certificate with private key and import it to my mobile. Now I can login to any secure wireless network.
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Fallen Spartan said:
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Click to expand...
Click to collapse
That solution doesn't seem to work for this problem.
Resetting the router does seem to work.
I don't get why resetting the router works.... other devices can still connect no problems before resetting, so it only seems to be aproblem with the hd.
It also sux when you are using a public router with this problem that you can't reset.
Connecting to Belkin router
Guys, I had the same problem as well. HTC touch HD used to connect to the router fine but after installing an update/upgrade it would pick the signal from the router but would not connect. (I was using WEP authentication at this time)
SOLUTION:
Go to belkin router configuration on the web.
Under security change the Securtiy Mode to WPA/WPA2-Personal(PSK)
Change authentication to WPA-PSK
Select Encryption to TKIP and enter your password.
GO to your HTC touch HD's WiFi setting and turn Wifi ON. Select your home network SSID and edit it using the information you used on the router i.e. WPA-PSK ; TKIP, enter your key/password and click next, next and finish.
Worked for me....hope it helps.
WIFI not connecting
That truly is extremly nasty.
I have the same issue - wifi found, correct password (WEP, WPA all settings) but no successful connection.
Took an old HTC 3xxx - runs immediately.
I can not reset the router - there are too many users, they will kill me then.
So I installed an Access point (Sparklan WX 7800A) to play with.
Notebooks (HP, MSI and ASUS) have successful internet access, also the old HTC 3xxx.
But still the HTC HD does not connect.
Tried "WIFI Monster" - shows the wifi, but does not connect.
(But it deletes all wifi entries easily - so you can set them up new)
Tried with NO security/password: same issue.
WEP, WPA (all kinds): no connection
There must be something to be changed in the registry - but I have no idea what & where.
Or is the wifi that useless ?????
Maybe someone can help
Ciao
Mike
I had the same problem. But the problem stopped when i connect my htc HD to my laptop and used activesync to connect to internet. After i disconnected it, open wifi and... works ok!!
I just got my Diamond2 - it is my first personal Windows Mobile phone, and so far I am generally pleased with it.
I have been developing applications for Windows Mobile and WinCE devices for years as part of my work, and has thus used such devices extensively, so i don't consider myself a noob.
I have a serious problem though. At home I have a hidden Wifi network (no SSID broadcast). I can configure this network just fine, and the Diamond2 connects to it and all is well. However, when the phone loses connection to the network, it doesn't reconnect and it loses my network profile settings totally, or at least so it seems. That means I have to enter my very long WPA key again (or have it in plain text on the device so I can copy/paste it, but I would rather avoid that).
Anyone else have this problem and hopefully a solution? It is really the only thing annoying me right now with this device.
Not sure to be honest but why not just have it on broadcast SSID if you already have WPA security on it? I know it's not a fix to what you want but the fact it's hidden is probably the whole reason it won't reconnect.
That is the solution I have deferred to right now, and it seems to be working.
I just think it ought to work with hidden networks as well, and indeed it does, it just "forgets" the settings when disconnected and doesn't reconnect.
Thats strange. I have mine hidden as well but it works just fine.
It also works 2 other places which I have tried that runs no SSID broadcast. The keys used are WPA-PSK and WPA2-PSK.
Have you tried Hard Resetting your device? I know its a pain, but mine also had some bugs out of the box which got fixed after a Hard Reset..
I have the same problem now.
I have a hidden wireless network and can configure it just fine in the topaz.
It works quite well and fast (54Mbit WPA2, PSK, AES) and connects without problems most of the time.
But then sometimes it tries to connect to my network (I can see this in the wifi overview) without success.
My wireless setting then disappears completely from the topaz.
Then I have to recreate the complete wifi setting from scratch again.
This setting can be used at once just fine, but will fail and disappear again after a while (number of days? number of reconnects?)
Does anyone know, where the wifi settings are stored?
Couldn't find it in the registry with searching for the wifi SSID.
Maybe a backup could be made and restored if the setting is gone again.
It sounds like a bug for me, because you can explicitly configure a hidden network (via checkbox) and the setting should not be removed in case of any connection problem to that network.
Creating a new topic, because the other one is tagged as solved, but it doesnt solve my problem however.
So my wifi is not working, it's connecting to any wifi hotspot but not sending data thru that, which ends in failing loading any pages on IE, cannot download any apps from market and so on...
Anyway this is what I tried so far:
1. Flashed to stock rogers (also tried different Tango roms)
2. Did hard reset procedure via hardware keys (Format all Yes)
3. Did hard reset procedure via About menu
4. Did hard reset procedure via Samsung Diagnosis code sequence
5. Logged to my wifi network, everything looks fine at this point.
6. Opened IE and entered google.com:
"We're having trouble connecting to this webpage" (sometimes no error message but white page with scrolling bars appearing on touch)
7. Tried to access my wifi router via IP address (192.168.1.1) - the same results like above
8. Tried to ping my Samsung Fous IP (192.168.1.18) from my PC with success
9. Disabled wifi network security on home wifi router, the Focus still not working
Additionaly tried a method that fix issues with wifi after using latest wp7 tools, but it didnt help at all.
When using my providers APN there is no problem with opening pages on IE etc., but it's not Wifi.... Internet is also working if I have USB cable plugged in, but again it's not wifi.
Cannot use warranty, the phone is from the USA and I'm in Europe... without any warranty service.
What else I can do, maybe there are some diagnosis codes that can actually help with real diagnosis on what happened with wifi on my phone?
Hello again (from the other thread). For completeness, add the following:
- current OS version
- did/not use WindowBreak
- when did the problem start (if you can identify an event and OS version/revision) - or you noticed
There might be a test for wireless in the "diagnosis codes"... Good luck!
After you use the diagnosis fix, it might take some time, mine didn't work immediately but after some time, it detected my home network. But it seems you are able to connect but internet does not work, this is certainly issue with router/DNS settings in your phone, because I have faced these problems in iPhone, it might wrongly mapped to unreachable ip, but never faced this issue in Windows Phone, you might try changing the default gateway/dns settings, you should also reset your modem/router, and try basic setup before WPA/WPA2 setup
EnderPsp said:
Hello again (from the other thread). For completeness, add the following:
- current OS version
- did/not use WindowBreak
- when did the problem start (if you can identify an event and OS version/revision) - or you noticed
There might be a test for wireless in the "diagnosis codes"... Good luck!
Click to expand...
Click to collapse
Hi there
Currently using 7.10.8773.98, (MAGLDR 2.0) but tried different versions, even vanilla pre-mango ones, they didnt work well with wifi on my phone either. I checked it at friends home wifi, which is totaly different network and routers.
I never used WindowBreak, never had to because my phone was already unlocked long time ago with ChevronWP7 application.
Noticed the problem about 2 weeks ago, but I didnt use wifi too much, so it could started much earlier. Last installed application was WP7 Tools 0.8 alpha, and all I did back then was using some built-in tweaks (3G?) if there is any, cant remember to be honest but for sure I wasnt editing registry or anything like that, I just play some games from time to time, cant event tell why I installed it, maybe because I noticed there is a new version. I cant tell because I never paid attention to it especially with rare wifi usage at a time.
I have isolated the problem I guess, and it's not the phone's fault. Something wrong with the main access point (Mikrotik) at my place. This is weird because everything is working just not on Samsung Focus. I digged thru many options and couldnt find anything that blocked or stuff like that. Well took it to totaly different place and another wifi network, and guess what - it's connecting to wifi with data flow...
Anyway consider this topic as solved.