I recently upgraded the ROM on my k-jam from the original factory ROM.
Before:
Rom date: 9/16/05
Protocol Ver: 4.0.13.16
IPL 1.01
SPL 1.06
GSM 01.01.10
OS 1.1.9.3
After:
Rom date:2/6/06
Protocol Ver: 413.1.03
ExtROM Ver: 2.16.9.101
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 WWE
Ever since the upgrade the phone seems lock up at least once a day. The light continues to flash, but nothing will wake the device up. None of the buttons are responsive. Holding or tapping the power button has no effect.
The only solution is to press the recessed button next to the IR lens to get it to reset.
Any ideas? Any way to go back to the original Rom?
Thanks,
-Sean
Hi,
I am also using a wizard, K-Jam, and I need some help from you guys.
Several month ago, when I tried to flash its rom, without much knowledge on flashing roms, I accidentally used MTTY to DOCTEST the rom, which according to the threads I was following, was to "format" the rom. Then I flashed it with Custom RUU 1.01.
The phone works well after that except the IPL becomes forever 1.01, no matter what kind of rom flashed. The SPL can be upgraded or downgraded without problem.
So, now the phone is
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 19839.kosky\xc8~\xd3~Hr.)
ROM: 5.2
Registry AKU: .kosky\xc8~\xd3~Hr.
Radio: 02.69.11
Protocol: 4.1.13.30
It seems the IPL is locked at 1.01. Can anyone help to solve this?
Another issue is the Wifi. When I flash it back to Custom wm 5.0 rom1.01 (IPL/SPL1.01), the Wifi works fine. Everything(WLan mode, MAC, etc.) is pre-set. But when I flash it to other roms, I can't turn on the Wifi, either through Commanager, or Settings>Connection. When I tap the WLan button, the process indicator goes on for a while and then off, the Wlan is still off. Impossible to input the WLan settings.
I wonder if the Wifi problem is caused by the IPL locking.
I do need help and advice from you guys, thank you very much!
Having a little issue with my Mini S, I was driving a long with sat nav running and it locked up, not responsive at all.
So i soft reset the device and waited for it to reboot, however now it some times gets stuck on the boot loader and just displays the os details and hangs
(Current versions)
IPL 3.08
SPL 3.08
GSM 02.25.11
OS 2.26.10.2
I have also noticed that when its in this state the rom is not readable, if you try and flash the device with a new rom it will report the current rom as nothing, just says its blank, how ever you can flash the rom.
When it is working and you try and flash the rom it will bring up the version details, so im wondering if its not booting due to a hardware fault, any ideas on this ?
Hello folks,
My device is a QTEK A9100.
After updating my rom to one with WM6.5 I noticed that my boot screen now looks like a gradient from green to black like the picture attached.
The problem is that the phone now doesn't activate de radio. It show no signal and when I try to enable the phone in comm manager, it doesn't enable it.
So I decided to go back to WM6.1. Right now I'm using X2H's WM6.1 Manila UI - http://forum.xda-developers.com/showpost.php?p=3459150&postcount=8
Also, the battery light is not staying lit when the usb or power cable are connected and active sync is not detecting the phone. Also the phone less responsive then usual.
IPL/SPL version are shown as follows in the boot screen:
IPL: 2.21.0001
SPL: 2.21.olip
<-- blank line
OS: 6.1.0.0
Settings > System > Device Information shows in the Version tab:
ROM version: 6.1.0.0 WWE
ROM date: 1/16/08
It does not show radio or protocol version as I saw in another screen shots.
Any ideas on how to enable the radio and make active sync detects the phone?
help anyone?
the blank line at the boot can mean there is the corrupt radio or something similar...the radio version is showed there
i think the best way is try an hard reset, and if it don't work the way is flash a radio...
Hard Reset didn't work.
Tried to install radios 3.02.11 and 2.69.11 and nothing.
The rom install finishes without error but after the device resets it looks like the same it was before. It show no GSM version at the boot screen and the boot screen keep showing for almost 2 minutes.
reflash your stock rom.
josefcrist said:
reflash your stock rom.
Click to expand...
Click to collapse
Thanks, I did it and still the same.
Now the IPL and SPL are version 2.22.0001
But the green boot screen remains and still not show the GSM version.
The WM is laggy and at the device information screen I can only see the rom version, the rom date and the ext rom version.
No information about protocol or radio version.
It seems that no matter what radio I flash, it's not stored in the device.
Any other ideias?
Hi guyz,
I flashed the Leon ROM in the morning. After the flash the phone was stuck on the HTC logo. After a soft reset it loaded up and everything worked perfectly. I really liked the LEON ROM so I kept it and started syncing all the stuff from my PC.. I was playing with it a few hours.
I added some albums to my SD card and was updating the music player when it crashed and reset itself.
I can't get past the HTC screen again. I tried everything, soft reset, with and without the SD card, without SIM, taking out the battery but it's stuck.
Can you guyz tell me what it is or of any of u had the same and how u sorted it out?
If nothing helps what can I do? Can I still flash the official ROM or should I re-flash LEON?
Hope it can be sorted without exchanging it or repair.
Thanks very much
Suz
----------------------
SPL 1.42 HardSPL by bepe and Cotulla
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.4 WWE
ROM Date: 02/19/10
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
samsamuel said:
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
Click to expand...
Click to collapse
1. Yes
2. No (just 2)
3. I am on in rite now.
Can I just flash a new ROM over it? Should work rite?
Yep, sure, boot to bootloader, wait for 'serial' to become 'usb' and run customruu.exe to flash.
Thanks very much for your help..
xxx
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to: http://forum.xda-developers.com/showthread.php?t=611787
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe (download here: http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 )
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
wtfbbq said:
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to:
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
Click to expand...
Click to collapse
Damn it! I wish I read this sooner.. I tried to flash the updated version of LEON 1.5 but nothing changed.. Now I'm flashing the original ROM 1.48.
I will run task 29 afterwards and try LEON 1.5 again. If it ain't working after that I will try the radio thingy .. Have to look up the radio stuff coz I'm still confused.. ehm..
Thanks so much for your help.. I appreciate it..
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
SinFire said:
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
Click to expand...
Click to collapse
i dont mean to sound pedantic but it LEO
djchubbs said:
i dont mean to sound pedantic but it LEO
Click to expand...
Click to collapse
nah.. it doesn't sound pedantic.. LOL.. LEON as in the ROM LEON.. not the phone... heh
wtfbbq said:
....(make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
Click to expand...
Click to collapse
The name is so of no importance! i can even call fu**er.nbh if i want to, Custom_RUU will still update it. As long as both files are in the same folder nothing else matters. If you don't believe me, then just go ahead and try it yourself