Having a little issue with my Mini S, I was driving a long with sat nav running and it locked up, not responsive at all.
So i soft reset the device and waited for it to reboot, however now it some times gets stuck on the boot loader and just displays the os details and hangs
(Current versions)
IPL 3.08
SPL 3.08
GSM 02.25.11
OS 2.26.10.2
I have also noticed that when its in this state the rom is not readable, if you try and flash the device with a new rom it will report the current rom as nothing, just says its blank, how ever you can flash the rom.
When it is working and you try and flash the rom it will bring up the version details, so im wondering if its not booting due to a hardware fault, any ideas on this ?
Related
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.
I've been reading on the upgrade to 6.1 with various cooked rom, and decided to go with Tessa 4.5. Since it is required to go with IPL 3.10/SPL 3.10, i went from original ROM and upgrade one step at a time, to 1.17, 2.26 and 2.28, and 3.10 (both IPL and SPL). Then I noticed after 3.10, i cannot boot up. This is before I upgrade to Tessa, just upgrading IPL/SPL.
When in 2.26, everytime upgrade completed, reboot went fine. But after 3.10, it went wrong. I tried to fix it with upgrading IPL only to 3.14.
It still wont boot up after power down.
So I downgrade to IPL/SPL 2.28. The SPL went down, but IPL stays at 3.14, and the problem continues. I can upgrade to Onyx, but everytime I power down, i have to flash with IPL/SPL 2.28 to make the ELF boot up. When I get to the OS, i check my battery is 0%.
Is IPL 3.14 the culprit? If yes, how do I downgrade it? using elf-uspl and/or Rom Utility gives same result: IPL stays at 3.14.
Help?
Update:
i was able to flash with elf-uspl using ipl/spl 2.27/2.28.
Now i have onyx junior with the ipl/spl combination above.
But it is still having problem when I turned off the device. It won't go pass smart mobility, instead it just shut down again. I have to take out the battery, put it back in, then reflash with rom utility (with any spl/ipl below 3.0) then it would restart and go pass smart mobility and enter the OS.
What gives?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 coked rom that would accept these IPL/SPL setting...
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 cooked rom that would accept these IPL/SPL setting...
Hello folks,
My device is a QTEK A9100.
After updating my rom to one with WM6.5 I noticed that my boot screen now looks like a gradient from green to black like the picture attached.
The problem is that the phone now doesn't activate de radio. It show no signal and when I try to enable the phone in comm manager, it doesn't enable it.
So I decided to go back to WM6.1. Right now I'm using X2H's WM6.1 Manila UI - http://forum.xda-developers.com/showpost.php?p=3459150&postcount=8
Also, the battery light is not staying lit when the usb or power cable are connected and active sync is not detecting the phone. Also the phone less responsive then usual.
IPL/SPL version are shown as follows in the boot screen:
IPL: 2.21.0001
SPL: 2.21.olip
<-- blank line
OS: 6.1.0.0
Settings > System > Device Information shows in the Version tab:
ROM version: 6.1.0.0 WWE
ROM date: 1/16/08
It does not show radio or protocol version as I saw in another screen shots.
Any ideas on how to enable the radio and make active sync detects the phone?
help anyone?
the blank line at the boot can mean there is the corrupt radio or something similar...the radio version is showed there
i think the best way is try an hard reset, and if it don't work the way is flash a radio...
Hard Reset didn't work.
Tried to install radios 3.02.11 and 2.69.11 and nothing.
The rom install finishes without error but after the device resets it looks like the same it was before. It show no GSM version at the boot screen and the boot screen keep showing for almost 2 minutes.
reflash your stock rom.
josefcrist said:
reflash your stock rom.
Click to expand...
Click to collapse
Thanks, I did it and still the same.
Now the IPL and SPL are version 2.22.0001
But the green boot screen remains and still not show the GSM version.
The WM is laggy and at the device information screen I can only see the rom version, the rom date and the ext rom version.
No information about protocol or radio version.
It seems that no matter what radio I flash, it's not stored in the device.
Any other ideias?
Please help!!!!!
Two days ago, my HD2 was hang after a series of web surfing. as usual, I remove the battery to hard boot the phone hope to clear the memory. Then Problem:
Only HTC logo display without "quietly brilliant", it did show the ROM, Radio version,
R 2.06.51.07
G 15.30.50.07
D 1.48.71294
and never go further to Window. Wait for about two minutes, the screen start blinking. Try the factory reset, reset progress well, yet the phone start the same problem.
remove the battery, start with bootloader, it can connect with computer (changing serial to USB at bootloader when connecting to the cable). but the WMDC can not see the device.
It still uses SPL-1.42.HSPL XE. Try to upgrade to HSPL2.08, it would not allow me to do so. I guess I need to downgrade to 1.42.0000 first. however, I just don't know what is my "official" ROM is.
I thought it might be corrupted ROM, so find a few different ROM to upgrade, such as ROM 1.66 (Taiwan version), it can change the ROM, but the same problem. Now it is upgraded to the "latest" ROM, and still the same problem
R 2.10.50.26
G 15.39.50.07U
D 2.13.90963 8G
Please help my poor soul and HD2 as well. I really hope it is not hardware issue.