Hello folks,
My device is a QTEK A9100.
After updating my rom to one with WM6.5 I noticed that my boot screen now looks like a gradient from green to black like the picture attached.
The problem is that the phone now doesn't activate de radio. It show no signal and when I try to enable the phone in comm manager, it doesn't enable it.
So I decided to go back to WM6.1. Right now I'm using X2H's WM6.1 Manila UI - http://forum.xda-developers.com/showpost.php?p=3459150&postcount=8
Also, the battery light is not staying lit when the usb or power cable are connected and active sync is not detecting the phone. Also the phone less responsive then usual.
IPL/SPL version are shown as follows in the boot screen:
IPL: 2.21.0001
SPL: 2.21.olip
<-- blank line
OS: 6.1.0.0
Settings > System > Device Information shows in the Version tab:
ROM version: 6.1.0.0 WWE
ROM date: 1/16/08
It does not show radio or protocol version as I saw in another screen shots.
Any ideas on how to enable the radio and make active sync detects the phone?
help anyone?
the blank line at the boot can mean there is the corrupt radio or something similar...the radio version is showed there
i think the best way is try an hard reset, and if it don't work the way is flash a radio...
Hard Reset didn't work.
Tried to install radios 3.02.11 and 2.69.11 and nothing.
The rom install finishes without error but after the device resets it looks like the same it was before. It show no GSM version at the boot screen and the boot screen keep showing for almost 2 minutes.
reflash your stock rom.
josefcrist said:
reflash your stock rom.
Click to expand...
Click to collapse
Thanks, I did it and still the same.
Now the IPL and SPL are version 2.22.0001
But the green boot screen remains and still not show the GSM version.
The WM is laggy and at the device information screen I can only see the rom version, the rom date and the ext rom version.
No information about protocol or radio version.
It seems that no matter what radio I flash, it's not stored in the device.
Any other ideias?
Related
I just got this Wizard a week ago, and upgraded ROMs and everything:
IPL 3.08
SPL 3.08
ROM version: 0.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.26.10.105
I unlocked it, started with the T-Mobile official WM5 ROM, and then upgraded to IPL/SPL 3.08 and then NTS Jaguar 4.0. I've been running it for a few days since with no problems, but then I did a soft reset, and when it came back on, it displayed the T-Mobile screen with the IPL SPL numbers, but then it fades to white, the entire screen is completely white, and then it flashes on and off.
It was kind of warm from recharging, so I left it sitting for a while, and when I turn it on again, it works fine. Was it just overheating?
Did you overclock the CPU? (more than 247 MHz)?
singhravi437 said:
Did you overclock the CPU? (more than 247 MHz)?
Click to expand...
Click to collapse
No, I haven't tried that yet.
So I was installing and trying some big programs, and the device was getting warm. After one installation it asked to reboot. I rebooted it, and it did the same thing again; slowly turning white after the boot loader and not responding to button presses. After taking out the battery and cooling it off in front of a fan, it seems to work fine.
Having a little issue with my Mini S, I was driving a long with sat nav running and it locked up, not responsive at all.
So i soft reset the device and waited for it to reboot, however now it some times gets stuck on the boot loader and just displays the os details and hangs
(Current versions)
IPL 3.08
SPL 3.08
GSM 02.25.11
OS 2.26.10.2
I have also noticed that when its in this state the rom is not readable, if you try and flash the device with a new rom it will report the current rom as nothing, just says its blank, how ever you can flash the rom.
When it is working and you try and flash the rom it will bring up the version details, so im wondering if its not booting due to a hardware fault, any ideas on this ?
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
I have alltel titan I accidentally flash the sprint rom now its stuck on start up screen? I want just want to upgade it to 6.1 rom any suggestion?
Thanks,
Please supply current bootloader, radio, and rom versions
I manage to flash back my phone but not its on verizon rom? the problem is when the phone turn off for battery saving when I press the power buttom to turn on its not turning on even I change the setting for when the device turn off press any key to turn on it will not. Unless I reset the device, any suggestion for this one?
Thanks
Here is the Bootloader Screen:
TITA100
SPL-2.47NocHEM Titan SPL EVT
CPLD-9
ROM VERSION: 2.09.605.8
RADIO VERSION: 1.30.60
Atlast Problem was sold update the thr Radio version from the previous one to 3.35.04 then I flash the ROM. now working smoth
Hi guyz,
I flashed the Leon ROM in the morning. After the flash the phone was stuck on the HTC logo. After a soft reset it loaded up and everything worked perfectly. I really liked the LEON ROM so I kept it and started syncing all the stuff from my PC.. I was playing with it a few hours.
I added some albums to my SD card and was updating the music player when it crashed and reset itself.
I can't get past the HTC screen again. I tried everything, soft reset, with and without the SD card, without SIM, taking out the battery but it's stuck.
Can you guyz tell me what it is or of any of u had the same and how u sorted it out?
If nothing helps what can I do? Can I still flash the official ROM or should I re-flash LEON?
Hope it can be sorted without exchanging it or repair.
Thanks very much
Suz
----------------------
SPL 1.42 HardSPL by bepe and Cotulla
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.4 WWE
ROM Date: 02/19/10
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
samsamuel said:
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
Click to expand...
Click to collapse
1. Yes
2. No (just 2)
3. I am on in rite now.
Can I just flash a new ROM over it? Should work rite?
Yep, sure, boot to bootloader, wait for 'serial' to become 'usb' and run customruu.exe to flash.
Thanks very much for your help..
xxx
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to: http://forum.xda-developers.com/showthread.php?t=611787
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe (download here: http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 )
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
wtfbbq said:
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to:
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
Click to expand...
Click to collapse
Damn it! I wish I read this sooner.. I tried to flash the updated version of LEON 1.5 but nothing changed.. Now I'm flashing the original ROM 1.48.
I will run task 29 afterwards and try LEON 1.5 again. If it ain't working after that I will try the radio thingy .. Have to look up the radio stuff coz I'm still confused.. ehm..
Thanks so much for your help.. I appreciate it..
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
SinFire said:
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
Click to expand...
Click to collapse
i dont mean to sound pedantic but it LEO
djchubbs said:
i dont mean to sound pedantic but it LEO
Click to expand...
Click to collapse
nah.. it doesn't sound pedantic.. LOL.. LEON as in the ROM LEON.. not the phone... heh
wtfbbq said:
....(make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
Click to expand...
Click to collapse
The name is so of no importance! i can even call fu**er.nbh if i want to, Custom_RUU will still update it. As long as both files are in the same folder nothing else matters. If you don't believe me, then just go ahead and try it yourself